[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20200607131339.476036-2-vaibhav@linux.ibm.com>
Date: Sun, 7 Jun 2020 18:43:34 +0530
From: Vaibhav Jain <vaibhav@...ux.ibm.com>
To: linuxppc-dev@...ts.ozlabs.org, linux-nvdimm@...ts.01.org,
linux-kernel@...r.kernel.org
Cc: Vaibhav Jain <vaibhav@...ux.ibm.com>,
Dan Williams <dan.j.williams@...el.com>,
"Aneesh Kumar K . V" <aneesh.kumar@...ux.ibm.com>,
Michael Ellerman <mpe@...erman.id.au>,
"Oliver O'Halloran" <oohall@...il.com>,
Santosh Sivaraj <santosh@...six.org>,
Steven Rostedt <rostedt@...dmis.org>,
Ira Weiny <ira.weiny@...el.com>
Subject: [PATCH v11 1/6] powerpc: Document details on H_SCM_HEALTH hcall
Add documentation to 'papr_hcalls.rst' describing the bitmap flags
that are returned from H_SCM_HEALTH hcall as per the PAPR-SCM
specification.
Cc: "Aneesh Kumar K . V" <aneesh.kumar@...ux.ibm.com>
Cc: Dan Williams <dan.j.williams@...el.com>
Cc: Michael Ellerman <mpe@...erman.id.au>
Cc: Ira Weiny <ira.weiny@...el.com>
Acked-by: Ira Weiny <ira.weiny@...el.com>
Signed-off-by: Vaibhav Jain <vaibhav@...ux.ibm.com>
---
Changelog:
v10..v11:
* None
v9..v10:
* Added ack from Ira.
Resend:
* None
v8..v9:
* s/SCM/PMEM device. [ Dan Williams, Aneesh ]
v7..v8:
* Added a clarification on bit-ordering of Health Bitmap
Resend:
* None
v6..v7:
* None
v5..v6:
* New patch in the series
---
Documentation/powerpc/papr_hcalls.rst | 46 ++++++++++++++++++++++++---
1 file changed, 42 insertions(+), 4 deletions(-)
diff --git a/Documentation/powerpc/papr_hcalls.rst b/Documentation/powerpc/papr_hcalls.rst
index 3493631a60f8..48fcf1255a33 100644
--- a/Documentation/powerpc/papr_hcalls.rst
+++ b/Documentation/powerpc/papr_hcalls.rst
@@ -220,13 +220,51 @@ from the LPAR memory.
**H_SCM_HEALTH**
| Input: drcIndex
-| Out: *health-bitmap, health-bit-valid-bitmap*
+| Out: *health-bitmap (r4), health-bit-valid-bitmap (r5)*
| Return Value: *H_Success, H_Parameter, H_Hardware*
Given a DRC Index return the info on predictive failure and overall health of
-the NVDIMM. The asserted bits in the health-bitmap indicate a single predictive
-failure and health-bit-valid-bitmap indicate which bits in health-bitmap are
-valid.
+the PMEM device. The asserted bits in the health-bitmap indicate one or more states
+(described in table below) of the PMEM device and health-bit-valid-bitmap indicate
+which bits in health-bitmap are valid. The bits are reported in
+reverse bit ordering for example a value of 0xC400000000000000
+indicates bits 0, 1, and 5 are valid.
+
+Health Bitmap Flags:
+
++------+-----------------------------------------------------------------------+
+| Bit | Definition |
++======+=======================================================================+
+| 00 | PMEM device is unable to persist memory contents. |
+| | If the system is powered down, nothing will be saved. |
++------+-----------------------------------------------------------------------+
+| 01 | PMEM device failed to persist memory contents. Either contents were |
+| | not saved successfully on power down or were not restored properly on |
+| | power up. |
++------+-----------------------------------------------------------------------+
+| 02 | PMEM device contents are persisted from previous IPL. The data from |
+| | the last boot were successfully restored. |
++------+-----------------------------------------------------------------------+
+| 03 | PMEM device contents are not persisted from previous IPL. There was no|
+| | data to restore from the last boot. |
++------+-----------------------------------------------------------------------+
+| 04 | PMEM device memory life remaining is critically low |
++------+-----------------------------------------------------------------------+
+| 05 | PMEM device will be garded off next IPL due to failure |
++------+-----------------------------------------------------------------------+
+| 06 | PMEM device contents cannot persist due to current platform health |
+| | status. A hardware failure may prevent data from being saved or |
+| | restored. |
++------+-----------------------------------------------------------------------+
+| 07 | PMEM device is unable to persist memory contents in certain conditions|
++------+-----------------------------------------------------------------------+
+| 08 | PMEM device is encrypted |
++------+-----------------------------------------------------------------------+
+| 09 | PMEM device has successfully completed a requested erase or secure |
+| | erase procedure. |
++------+-----------------------------------------------------------------------+
+|10:63 | Reserved / Unused |
++------+-----------------------------------------------------------------------+
**H_SCM_PERFORMANCE_STATS**
--
2.26.2
Powered by blists - more mailing lists