| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 8 Jun 2020 19:41:19 +0530
From: Sivaprakash Murugesan <sivaprak@...eaurora.org>
To: agross@...nel.org, bjorn.andersson@...aro.org, kishon@...com,
vkoul@...nel.org, robh+dt@...nel.org, mgautam@...eaurora.org,
linux-arm-msm@...r.kernel.org, linux-kernel@...r.kernel.org,
devicetree@...r.kernel.org
Cc: Sivaprakash Murugesan <sivaprak@...eaurora.org>
Subject: [PATCH V3 5/5] arm64: dts: ipq8074: enable USB support
IPQ8074 has two super speed usb ports, add phy and dwc3 nodes
to enable them.
Signed-off-by: Sivaprakash Murugesan <sivaprak@...eaurora.org>
---
arch/arm64/boot/dts/qcom/ipq8074-hk01.dts | 24 +++++
arch/arm64/boot/dts/qcom/ipq8074.dtsi | 167 ++++++++++++++++++++++++++++++
2 files changed, 191 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
index 6754cb0..dadaa8e 100644
--- a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
+++ b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
@@ -82,3 +82,27 @@
nand-bus-width = <8>;
};
};
+
+&qusb_phy_0 {
+ status = "ok";
+};
+
+&qusb_phy_1 {
+ status = "ok";
+};
+
+&ssphy_0 {
+ status = "ok";
+};
+
+&ssphy_1 {
+ status = "ok";
+};
+
+&usb_0 {
+ status = "ok";
+};
+
+&usb_1 {
+ status = "ok";
+};
diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
index 5303821..506a8ac 100644
--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
@@ -82,6 +82,91 @@
ranges = <0 0 0 0xffffffff>;
compatible = "simple-bus";
+ ssphy_1: phy@...00 {
+ compatible = "qcom,ipq8074-qmp-usb3-phy";
+ reg = <0x00058000 0x1c4>;
+ #clock-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ clocks = <&gcc GCC_USB1_AUX_CLK>,
+ <&gcc GCC_USB1_PHY_CFG_AHB_CLK>,
+ <&xo>;
+ clock-names = "aux", "cfg_ahb", "ref";
+
+ resets = <&gcc GCC_USB1_PHY_BCR>,
+ <&gcc GCC_USB3PHY_1_PHY_BCR>;
+ reset-names = "phy","common";
+ status = "disabled";
+
+ usb1_ssphy: lane@...00 {
+ reg = <0x00058200 0x130>, /* Tx */
+ <0x00058400 0x200>, /* Rx */
+ <0x00058800 0x1f8>, /* PCS */
+ <0x00058600 0x044>; /* PCS misc*/
+ #phy-cells = <0>;
+ clocks = <&gcc GCC_USB1_PIPE_CLK>;
+ clock-names = "pipe0";
+ clock-output-names = "gcc_usb1_pipe_clk_src";
+ };
+ };
+
+ qusb_phy_1: phy@...00 {
+ compatible = "qcom,ipq8074-qusb2-phy";
+ reg = <0x00059000 0x180>;
+ #phy-cells = <0>;
+
+ clocks = <&gcc GCC_USB1_PHY_CFG_AHB_CLK>,
+ <&xo>;
+ clock-names = "cfg_ahb", "ref";
+
+ resets = <&gcc GCC_QUSB2_1_PHY_BCR>;
+ status = "disabled";
+ };
+
+ ssphy_0: phy@...00 {
+ compatible = "qcom,ipq8074-qmp-usb3-phy";
+ reg = <0x00078000 0x1c4>;
+ #clock-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ clocks = <&gcc GCC_USB0_AUX_CLK>,
+ <&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
+ <&xo>;
+ clock-names = "aux", "cfg_ahb", "ref";
+
+ resets = <&gcc GCC_USB0_PHY_BCR>,
+ <&gcc GCC_USB3PHY_0_PHY_BCR>;
+ reset-names = "phy","common";
+ status = "disabled";
+
+ usb0_ssphy: lane@...00 {
+ reg = <0x00078200 0x130>, /* Tx */
+ <0x00078400 0x200>, /* Rx */
+ <0x00078800 0x1f8>, /* PCS */
+ <0x00078600 0x044>; /* PCS misc*/
+ #phy-cells = <0>;
+ clocks = <&gcc GCC_USB0_PIPE_CLK>;
+ clock-names = "pipe0";
+ clock-output-names = "gcc_usb0_pipe_clk_src";
+ };
+ };
+
+ qusb_phy_0: phy@...00 {
+ compatible = "qcom,ipq8074-qusb2-phy";
+ reg = <0x00079000 0x180>;
+ #phy-cells = <0>;
+
+ clocks = <&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
+ <&xo>;
+ clock-names = "cfg_ahb", "ref";
+
+ resets = <&gcc GCC_QUSB2_0_PHY_BCR>;
+ };
+
pcie_phy0: phy@...00 {
compatible = "qcom,ipq8074-qmp-pcie-phy";
reg = <0x00086000 0x1000>;
@@ -294,6 +379,88 @@
status = "disabled";
};
+ usb_0: usb@...8800 {
+ compatible = "qcom,dwc3";
+ reg = <0x08af8800 0x400>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ clocks = <&gcc GCC_SYS_NOC_USB0_AXI_CLK>,
+ <&gcc GCC_USB0_MASTER_CLK>,
+ <&gcc GCC_USB0_SLEEP_CLK>,
+ <&gcc GCC_USB0_MOCK_UTMI_CLK>;
+ clock-names = "sys_noc_axi",
+ "master",
+ "sleep",
+ "mock_utmi";
+
+ assigned-clocks = <&gcc GCC_SYS_NOC_USB0_AXI_CLK>,
+ <&gcc GCC_USB0_MASTER_CLK>,
+ <&gcc GCC_USB0_MOCK_UTMI_CLK>;
+ assigned-clock-rates = <133330000>,
+ <133330000>,
+ <19200000>;
+
+ resets = <&gcc GCC_USB0_BCR>;
+ status = "disabled";
+
+ dwc_0: dwc3@...0000 {
+ compatible = "snps,dwc3";
+ reg = <0x8a00000 0xcd00>;
+ interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&qusb_phy_0>, <&usb0_ssphy>;
+ phy-names = "usb2-phy", "usb3-phy";
+ tx-fifo-resize;
+ snps,is-utmi-l1-suspend;
+ snps,hird-threshold = /bits/ 8 <0x0>;
+ snps,dis_u2_susphy_quirk;
+ snps,dis_u3_susphy_quirk;
+ dr_mode = "host";
+ };
+ };
+
+ usb_1: usb@...8800 {
+ compatible = "qcom,dwc3";
+ reg = <0x08cf8800 0x400>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ clocks = <&gcc GCC_SYS_NOC_USB1_AXI_CLK>,
+ <&gcc GCC_USB1_MASTER_CLK>,
+ <&gcc GCC_USB1_SLEEP_CLK>,
+ <&gcc GCC_USB1_MOCK_UTMI_CLK>;
+ clock-names = "sys_noc_axi",
+ "master",
+ "sleep",
+ "mock_utmi";
+
+ assigned-clocks = <&gcc GCC_SYS_NOC_USB1_AXI_CLK>,
+ <&gcc GCC_USB1_MASTER_CLK>,
+ <&gcc GCC_USB1_MOCK_UTMI_CLK>;
+ assigned-clock-rates = <133330000>,
+ <133330000>,
+ <19200000>;
+
+ resets = <&gcc GCC_USB1_BCR>;
+ status = "disabled";
+
+ dwc_1: dwc3@...0000 {
+ compatible = "snps,dwc3";
+ reg = <0x8c00000 0xcd00>;
+ interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&qusb_phy_1>, <&usb1_ssphy>;
+ phy-names = "usb2-phy", "usb3-phy";
+ tx-fifo-resize;
+ snps,is-utmi-l1-suspend;
+ snps,hird-threshold = /bits/ 8 <0x0>;
+ snps,dis_u2_susphy_quirk;
+ snps,dis_u3_susphy_quirk;
+ dr_mode = "host";
+ };
+ };
+
intc: interrupt-controller@...0000 {
compatible = "qcom,msm-qgic2";
interrupt-controller;
--
2.7.4
Powered by blists - more mailing lists