linux-kernel - [PATCH 0/9] Raspberry Pi 4 USB firmware initialization rework

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20200608192701.18355-1-nsaenzjulienne@suse.de>
Date:   Mon,  8 Jun 2020 21:26:52 +0200
From:   Nicolas Saenz Julienne <nsaenzjulienne@...e.de>
To:     f.fainelli@...il.com, gregkh@...uxfoundation.org, wahrenst@....net,
        robh@...nel.org, mathias.nyman@...ux.intel.com,
        Eric Anholt <eric@...olt.net>,
        bcm-kernel-feedback-list@...adcom.com,
        linux-rpi-kernel@...ts.infradead.org,
        linux-arm-kernel@...ts.infradead.org, devicetree@...r.kernel.org,
        linux-pci@...r.kernel.org, linux-usb@...r.kernel.org
Cc:     linux-kernel@...r.kernel.org, tim.gover@...pberrypi.org,
        helgaas@...nel.org, lorenzo.pieralisi@....com,
        Nicolas Saenz Julienne <nsaenzjulienne@...e.de>
Subject: [PATCH 0/9] Raspberry Pi 4 USB firmware initialization rework

On the Raspberry Pi 4, after a PCI reset, VL805's firmware may either be
loaded directly from an EEPROM or, if not present, by the SoC's
co-processor, VideoCore. This series reworks how we handle this.

The previous solution makes use of PCI quirks and exporting platform
specific functions. Albeit functional it feels pretty shoehorned. This
proposes an alternative way of handling the triggering of the xHCI chip
initialization trough means of a reset controller.

The benefits are pretty evident: less platform churn in core xHCI code,
and no explicit device dependency management in pcie-brcmstb.

Note that patch #1 depend on another series[1].

The series is based on next-20200605.

[1] https://lwn.net/ml/linux-kernel/cover.662a8d401787ef33780d91252a352de91dc4be10.1590594293.git-series.maxime@cerno.tech/

---

Nicolas Saenz Julienne (9):
  dt-bindings: reset: Add a binding for the RPi Firmware USB reset
  reset: Add Raspberry Pi 4 firmware USB reset controller
  ARM: dts: bcm2711: Add firmware usb reset node
  ARM: dts: bcm2711: Add reset controller to xHCI node
  usb: xhci-pci: Add support for reset controllers
  Revert "USB: pci-quirks: Add Raspberry Pi 4 quirk"
  usb: host: pci-quirks: Bypass xHCI quirks for Raspberry Pi 4
  Revert "firmware: raspberrypi: Introduce vl805 init routine"
  Revert "PCI: brcmstb: Wait for Raspberry Pi's firmware when present"

 .../arm/bcm/raspberrypi,bcm2835-firmware.yaml |  21 +++
 arch/arm/boot/dts/bcm2711-rpi-4-b.dts         |  12 ++
 drivers/firmware/Kconfig                      |   3 +-
 drivers/firmware/raspberrypi.c                |  61 ---------
 drivers/pci/controller/pcie-brcmstb.c         |  17 ---
 drivers/reset/Kconfig                         |   9 ++
 drivers/reset/Makefile                        |   1 +
 drivers/reset/reset-raspberrypi-usb.c         | 122 ++++++++++++++++++
 drivers/usb/host/pci-quirks.c                 |  22 ++--
 drivers/usb/host/xhci-pci.c                   |   9 ++
 include/soc/bcm2835/raspberrypi-firmware.h    |   7 -
 11 files changed, 184 insertions(+), 100 deletions(-)
 create mode 100644 drivers/reset/reset-raspberrypi-usb.c

-- 
2.26.2