linux-kernel - Re: [PATCH] net: ethernet: mvneta: add support for 2.5G DRSGMII mode

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <20200609131402.GL11869@pengutronix.de>
Date:   Tue, 9 Jun 2020 15:14:03 +0200
From:   Sascha Hauer <s.hauer@...gutronix.de>
To:     Andrew Lunn <andrew@...n.ch>
Cc:     Russell King <rmk+kernel@...linux.org.uk>,
        devicetree@...r.kernel.org, kernel@...gutronix.de,
        netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
        Thomas Petazzoni <thomas.petazzoni@...tlin.com>,
        linux-arm-kernel@...ts.infradead.org
Subject: Re: [PATCH] net: ethernet: mvneta: add support for 2.5G DRSGMII mode

Hi Andrew,

On Tue, Jun 09, 2020 at 03:12:16PM +0200, Andrew Lunn wrote:
> On Tue, Jun 09, 2020 at 02:55:35PM +0200, Sascha Hauer wrote:
> > On Mon, Jun 08, 2020 at 04:57:37PM +0200, Andrew Lunn wrote:
> > > On Mon, Jun 08, 2020 at 09:47:16AM +0200, Sascha Hauer wrote:
> > > > The Marvell MVNETA Ethernet controller supports a 2.5 Gbps SGMII mode
> > > > called DRSGMII.
> > > > 
> > > > This patch adds a corresponding phy-mode string 'drsgmii' and parses it
> > > > from DT. The MVNETA then configures the SERDES protocol value
> > > > accordingly.
> > > > 
> > > > It was successfully tested on a MV78460 connected to a FPGA.
> > > 
> > > Hi Sascha
> > > 
> > > Is this really overclocked SGMII, or 2500BaseX? How does it differ
> > > from 2500BaseX, which mvneta already supports?
> > 
> > I think it is overclocked SGMII or 2500BaseX depending on the Port MAC
> > Control Register0 PortType setting bit.
> > As said to Russell we have a fixed link so nobody really cares if it's
> > SGMII or 2500BaseX. This boils down the patch to fixing the Serdes
> > configuration setting for 2500BaseX.
> 
> Hi Sascha
> 
> Does 2500BaseX work for your use case? Since this drsmgii mode is not
> well defined, i would prefer to not add it, unless it is really
> needed.

Yes, it does, see updated patch I just sent.

Sascha

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |