lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20200608231211.3363633-311-sashal@kernel.org>
Date:   Mon,  8 Jun 2020 19:07:16 -0400
From:   Sasha Levin <sashal@...nel.org>
To:     linux-kernel@...r.kernel.org, stable@...r.kernel.org
Cc:     Lubomir Rintel <lkundrak@...sk>, Arnd Bergmann <arnd@...db.de>,
        Sasha Levin <sashal@...nel.org>,
        linux-arm-kernel@...ts.infradead.org, devicetree@...r.kernel.org
Subject: [PATCH AUTOSEL 5.6 311/606] ARM: dts: mmp3-dell-ariel: Fix the SPI devices

From: Lubomir Rintel <lkundrak@...sk>

[ Upstream commit 233cbffaa0b9ca874731efee67a11f005da1f87c ]

I've managed to get about everything wrong while digging these out of
OEM's board file.

Correct the bus numbers, the exact model of the NOR flash, polarity of
the chip selects and align the SPI frequency with the data sheet.

Tested that it works now, with a slight fix to the PXA SSP driver.

Link: https://lore.kernel.org/r/20200419171157.672999-16-lkundrak@v3.sk
Signed-off-by: Lubomir Rintel <lkundrak@...sk>
Cc: <stable@...r.kernel.org>
Signed-off-by: Arnd Bergmann <arnd@...db.de>
Signed-off-by: Sasha Levin <sashal@...nel.org>
---
 arch/arm/boot/dts/mmp3-dell-ariel.dts | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm/boot/dts/mmp3-dell-ariel.dts b/arch/arm/boot/dts/mmp3-dell-ariel.dts
index 15449c72c042..b0ec14c42164 100644
--- a/arch/arm/boot/dts/mmp3-dell-ariel.dts
+++ b/arch/arm/boot/dts/mmp3-dell-ariel.dts
@@ -98,19 +98,19 @@ &twsi4 {
 	status = "okay";
 };
 
-&ssp3 {
+&ssp1 {
 	status = "okay";
-	cs-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>;
+	cs-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
 
 	firmware-flash@0 {
-		compatible = "st,m25p80", "jedec,spi-nor";
+		compatible = "winbond,w25q32", "jedec,spi-nor";
 		reg = <0>;
-		spi-max-frequency = <40000000>;
+		spi-max-frequency = <104000000>;
 		m25p,fast-read;
 	};
 };
 
-&ssp4 {
-	cs-gpios = <&gpio 56 GPIO_ACTIVE_HIGH>;
+&ssp2 {
+	cs-gpios = <&gpio 56 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
-- 
2.25.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ