| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1591665502-6573-4-git-send-email-chun-hung.wu@mediatek.com>
Date: Tue, 9 Jun 2020 09:18:21 +0800
From: Chun-Hung Wu <chun-hung.wu@...iatek.com>
To: <mirq-linux@...e.qmqm.pl>, Jonathan Hunter <jonathanh@...dia.com>,
Al Cooper <alcooperx@...il.com>,
Adrian Hunter <adrian.hunter@...el.com>,
Florian Fainelli <f.fainelli@...il.com>,
<bcm-kernel-feedback-list@...adcom.com>,
Andy Gross <agross@...nel.org>,
Bjorn Andersson <bjorn.andersson@...aro.org>,
Michal Simek <michal.simek@...inx.com>,
Thierry Reding <thierry.reding@...il.com>,
Chaotian Jing <chaotian.jing@...iatek.com>,
Ulf Hansson <ulf.hansson@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Matthias Brugger <matthias.bgg@...il.com>,
Linus Walleij <linus.walleij@...aro.org>,
Pavel Machek <pavel@....cz>,
Kate Stewart <kstewart@...uxfoundation.org>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Martin Blumenstingl <martin.blumenstingl@...glemail.com>,
Pan Bian <bianpan2016@....com>,
Thomas Gleixner <tglx@...utronix.de>,
Allison Randal <allison@...utok.net>,
Mathieu Malaterre <malat@...ian.org>,
Stanley Chu <stanley.chu@...iatek.com>,
Kuohong Wang <kuohong.wang@...iatek.com>
CC: <kernel-team@...roid.com>, <linux-kernel@...r.kernel.org>,
<linux-mmc@...r.kernel.org>, <linux-mediatek@...ts.infradead.org>,
<devicetree@...r.kernel.org>, <wsd_upstream@...iatek.com>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-arm-msm@...r.kernel.org>, <linux-tegra@...r.kernel.org>,
Chun-Hung Wu <chun-hung.wu@...iatek.com>
Subject: [PATCH v6 3/4] mmc: mediatek: command queue support
Support command queue for mt6779 platform.
a. Add msdc_set_busy_timeout() to calculate emmc write timeout.
b. Connect mtk msdc driver to cqhci driver through
host->cq_host->ops = &msdc_cmdq_ops;
c. msdc_cmdq_irq() will link up with cqchi_irq(). Besides, it provides
more irq error messages like RSPCRCERR/CMDTO/DATACRCERR/DATTMO.
d. Use the options below to separate support for CQHCI or not, because
some of our platform does not support CQHCI hence no kernel option:
CONFIG_MMC_CQHCI.
#if IS_ENABLED(CONFIG_MMC_CQHCI)
XXX //Support CQHCI
#else
XXX //Not support CQHCI
#endif
Signed-off-by: Chun-Hung Wu <chun-hung.wu@...iatek.com>
---
drivers/mmc/host/mtk-sd.c | 119 ++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 119 insertions(+)
diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
index 84a7bd44..9d69269 100644
--- a/drivers/mmc/host/mtk-sd.c
+++ b/drivers/mmc/host/mtk-sd.c
@@ -31,6 +31,8 @@
#include <linux/mmc/sdio.h>
#include <linux/mmc/slot-gpio.h>
+#include "cqhci.h"
+
#define MAX_BD_NUM 1024
/*--------------------------------------------------------------------------*/
@@ -152,6 +154,7 @@
#define MSDC_INT_DMA_BDCSERR (0x1 << 17) /* W1C */
#define MSDC_INT_DMA_GPDCSERR (0x1 << 18) /* W1C */
#define MSDC_INT_DMA_PROTECT (0x1 << 19) /* W1C */
+#define MSDC_INT_CMDQ (0x1 << 28) /* W1C */
/* MSDC_INTEN mask */
#define MSDC_INTEN_MMCIRQ (0x1 << 0) /* RW */
@@ -182,6 +185,7 @@
/* SDC_CFG mask */
#define SDC_CFG_SDIOINTWKUP (0x1 << 0) /* RW */
#define SDC_CFG_INSWKUP (0x1 << 1) /* RW */
+#define SDC_CFG_WRDTOC (0x1fff << 2) /* RW */
#define SDC_CFG_BUSWIDTH (0x3 << 16) /* RW */
#define SDC_CFG_SDIO (0x1 << 19) /* RW */
#define SDC_CFG_SDIOIDE (0x1 << 20) /* RW */
@@ -230,6 +234,7 @@
#define MSDC_PATCH_BIT_DECRCTMO (0x1 << 30) /* RW */
#define MSDC_PATCH_BIT1_CMDTA (0x7 << 3) /* RW */
+#define MSDC_PB1_BUSY_CHECK_SEL (0x1 << 7) /* RW */
#define MSDC_PATCH_BIT1_STOP_DLY (0xf << 8) /* RW */
#define MSDC_PATCH_BIT2_CFGRESP (0x1 << 15) /* RW */
@@ -431,9 +436,11 @@ struct msdc_host {
/* cmd response sample selection for HS400 */
bool hs400_mode; /* current eMMC will run at hs400 mode */
bool internal_cd; /* Use internal card-detect logic */
+ bool cqhci; /* support eMMC hw cmdq */
struct msdc_save_para save_para; /* used when gate HCLK */
struct msdc_tune_para def_tune_para; /* default tune setting */
struct msdc_tune_para saved_tune_para; /* tune result of CMD21/CMD19 */
+ struct cqhci_host *cq_host;
};
static const struct mtk_mmc_compatible mt8135_compat = {
@@ -764,6 +771,15 @@ static void msdc_set_timeout(struct msdc_host *host, u64 ns, u64 clks)
(u32)(timeout > 255 ? 255 : timeout));
}
+static void msdc_set_busy_timeout(struct msdc_host *host, u64 ns, u64 clks)
+{
+ u64 timeout;
+
+ timeout = msdc_timeout_cal(host, ns, clks);
+ sdr_set_field(host->base + SDC_CFG, SDC_CFG_WRDTOC,
+ (u32)(timeout > 8191 ? 8191 : timeout));
+}
+
static void msdc_gate_clock(struct msdc_host *host)
{
clk_disable_unprepare(host->src_clk_cg);
@@ -1480,6 +1496,36 @@ static void msdc_enable_sdio_irq(struct mmc_host *mmc, int enb)
pm_runtime_put_noidle(host->dev);
}
+#if IS_ENABLED(CONFIG_MMC_CQHCI)
+static irqreturn_t msdc_cmdq_irq(struct msdc_host *host, u32 intsts)
+{
+ int cmd_err = 0, dat_err = 0;
+
+ if (intsts & MSDC_INT_RSPCRCERR) {
+ cmd_err = -EILSEQ;
+ dev_err(host->dev, "%s: CMD CRC ERR", __func__);
+ } else if (intsts & MSDC_INT_CMDTMO) {
+ cmd_err = -ETIMEDOUT;
+ dev_err(host->dev, "%s: CMD TIMEOUT ERR", __func__);
+ }
+
+ if (intsts & MSDC_INT_DATCRCERR) {
+ dat_err = -EILSEQ;
+ dev_err(host->dev, "%s: DATA CRC ERR", __func__);
+ } else if (intsts & MSDC_INT_DATTMO) {
+ dat_err = -ETIMEDOUT;
+ dev_err(host->dev, "%s: DATA TIMEOUT ERR", __func__);
+ }
+
+ if (cmd_err || dat_err) {
+ dev_err(host->dev, "cmd_err = %d, dat_err =%d, intsts = 0x%x",
+ cmd_err, dat_err, intsts);
+ }
+
+ return cqhci_irq(host->mmc, 0, cmd_err, dat_err);
+}
+#endif
+
static irqreturn_t msdc_irq(int irq, void *dev_id)
{
struct msdc_host *host = (struct msdc_host *) dev_id;
@@ -1516,6 +1562,16 @@ static irqreturn_t msdc_irq(int irq, void *dev_id)
if (!(events & (event_mask & ~MSDC_INT_SDIOIRQ)))
break;
+#if IS_ENABLED(CONFIG_MMC_CQHCI)
+ if ((host->mmc->caps2 & MMC_CAP2_CQE) &&
+ (events & MSDC_INT_CMDQ)) {
+ msdc_cmdq_irq(host, events);
+ /* clear interrupts */
+ writel(events, host->base + MSDC_INT);
+ return IRQ_HANDLED;
+ }
+#endif
+
if (!mrq) {
dev_err(host->dev,
"%s: MRQ=NULL; events=%08X; event_mask=%08X\n",
@@ -2200,6 +2256,36 @@ static int msdc_get_cd(struct mmc_host *mmc)
return !val;
}
+static void msdc_cqe_enable(struct mmc_host *mmc)
+{
+ struct msdc_host *host = mmc_priv(mmc);
+
+ /* enable cmdq irq */
+ writel(MSDC_INT_CMDQ, host->base + MSDC_INTEN);
+ /* enable busy check */
+ sdr_set_bits(host->base + MSDC_PATCH_BIT1, MSDC_PB1_BUSY_CHECK_SEL);
+ /* default write data / busy timeout 20s */
+ msdc_set_busy_timeout(host, 20 * 1000000000ULL, 0);
+ /* default read data timeout 1s */
+ msdc_set_timeout(host, 1000000000ULL, 0);
+}
+
+void msdc_cqe_disable(struct mmc_host *mmc, bool recovery)
+{
+ struct msdc_host *host = mmc_priv(mmc);
+
+ /* disable cmdq irq */
+ sdr_clr_bits(host->base + MSDC_INTEN, MSDC_INT_CMDQ);
+ /* disable busy check */
+ sdr_clr_bits(host->base + MSDC_PATCH_BIT1, MSDC_PB1_BUSY_CHECK_SEL);
+
+ if (recovery) {
+ sdr_set_field(host->base + MSDC_DMA_CTRL,
+ MSDC_DMA_CTRL_STOP, 1);
+ msdc_reset_hw(host);
+ }
+}
+
static const struct mmc_host_ops mt_msdc_ops = {
.post_req = msdc_post_req,
.pre_req = msdc_pre_req,
@@ -2216,6 +2302,11 @@ static int msdc_get_cd(struct mmc_host *mmc)
.hw_reset = msdc_hw_reset,
};
+static const struct cqhci_host_ops msdc_cmdq_ops = {
+ .enable = msdc_cqe_enable,
+ .disable = msdc_cqe_disable,
+};
+
static void msdc_of_property_parse(struct platform_device *pdev,
struct msdc_host *host)
{
@@ -2236,6 +2327,12 @@ static void msdc_of_property_parse(struct platform_device *pdev,
host->hs400_cmd_resp_sel_rising = true;
else
host->hs400_cmd_resp_sel_rising = false;
+
+ if (of_property_read_bool(pdev->dev.of_node,
+ "mediatek,cqhci"))
+ host->cqhci = true;
+ else
+ host->cqhci = false;
}
static int msdc_drv_probe(struct platform_device *pdev)
@@ -2351,6 +2448,8 @@ static int msdc_drv_probe(struct platform_device *pdev)
mmc->caps2 |= MMC_CAP2_SDIO_IRQ_NOTHREAD;
mmc->caps |= MMC_CAP_ERASE | MMC_CAP_CMD23;
+ if (host->cqhci)
+ mmc->caps2 |= MMC_CAP2_CQE | MMC_CAP2_CQE_DCMD;
/* MMC core transfer sizes tunable parameters */
mmc->max_segs = MAX_BD_NUM;
if (host->dev_comp->support_64g)
@@ -2366,6 +2465,26 @@ static int msdc_drv_probe(struct platform_device *pdev)
host->dma_mask = DMA_BIT_MASK(32);
mmc_dev(mmc)->dma_mask = &host->dma_mask;
+#if IS_ENABLED(CONFIG_MMC_CQHCI)
+ if (mmc->caps2 & MMC_CAP2_CQE) {
+ host->cq_host = devm_kzalloc(host->mmc->parent,
+ sizeof(*host->cq_host),
+ GFP_KERNEL);
+ if (!host->cq_host) {
+ ret = -ENOMEM;
+ goto host_free;
+ }
+ host->cq_host->caps |= CQHCI_TASK_DESC_SZ_128;
+ host->cq_host->mmio = host->base + 0x800;
+ host->cq_host->ops = &msdc_cmdq_ops;
+ cqhci_init(host->cq_host, mmc, true);
+ mmc->max_segs = 128;
+ /* cqhci 16bit length */
+ /* 0 size, means 65536 so we don't have to -1 here */
+ mmc->max_seg_size = 64 * 1024;
+ }
+#endif
+
host->timeout_clks = 3 * 1048576;
host->dma.gpd = dma_alloc_coherent(&pdev->dev,
2 * sizeof(struct mt_gpdma_desc),
--
1.9.1
Powered by blists - more mailing lists