| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20200609074020.23860-2-yifeng.zhao@rock-chips.com>
Date: Tue, 9 Jun 2020 15:40:18 +0800
From: Yifeng Zhao <yifeng.zhao@...k-chips.com>
To: miquel.raynal@...tlin.com, richard@....at, vigneshr@...com,
robh+dt@...nel.org
Cc: devicetree@...r.kernel.org, linux-mtd@...ts.infradead.org,
heiko@...ech.de, linux-rockchip@...ts.infradead.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
Yifeng Zhao <yifeng.zhao@...k-chips.com>
Subject: [PATCH v6 1/8] dt-bindings: mtd: Describe Rockchip RK3xxx NAND flash controller
Documentation support for Rockchip RK3xxx NAND flash controllers
Signed-off-by: Yifeng Zhao <yifeng.zhao@...k-chips.com>
---
Changes in v6:
- Fix some wrong define
- Modified the definition of compatible
Changes in v5:
- Fix some wrong define
- Add boot-medium define
- Remove some compatible define
Changes in v4:
- The compatible define with rkxx_nfc
- Add assigned-clocks
- Fix some wrong define
Changes in v3:
- Change the title for the dt-bindings
Changes in v2: None
.../mtd/rockchip,nand-controller.yaml | 154 ++++++++++++++++++
1 file changed, 154 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mtd/rockchip,nand-controller.yaml
diff --git a/Documentation/devicetree/bindings/mtd/rockchip,nand-controller.yaml b/Documentation/devicetree/bindings/mtd/rockchip,nand-controller.yaml
new file mode 100644
index 000000000000..f753fe8248aa
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/rockchip,nand-controller.yaml
@@ -0,0 +1,154 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/rockchip,nand-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip SoCs NAND FLASH Controller (NFC)
+
+allOf:
+ - $ref: "nand-controller.yaml#"
+
+maintainers:
+ - Heiko Stuebner <heiko@...ech.de>
+
+properties:
+ compatible:
+ oneOf:
+ - const: rockchip,px30-nfc
+ - const: rockchip,rk2928-nfc
+ - const: rockchip,rv1108-nfc
+ - items:
+ - const: rockchip,rk3326-nfc
+ - const: rockchip,px30-nfc
+ - items:
+ - const: rockchip,rk3036-nfc
+ - const: rockchip,rk2928-nfc
+ - items:
+ - const: rockchip,rk3308-nfc
+ - const: rockchip,rv1108-nfc
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ minItems: 1
+ items:
+ - description: Bus Clock
+ - description: Module Clock
+
+ clock-names:
+ minItems: 1
+ items:
+ - const: ahb
+ - const: nfc
+
+ assigned-clocks:
+ maxItems: 1
+
+ assigned-clock-rates:
+ maxItems: 1
+
+ pinctrl-0:
+ maxItems: 1
+
+ pinctrl-names:
+ const: default
+
+ power-domains:
+ maxItems: 1
+
+patternProperties:
+ "^nand@[a-f0-9]$":
+ type: object
+ properties:
+ reg:
+ minimum: 0
+ maximum: 7
+
+ nand-ecc-mode:
+ const: hw
+
+ nand-ecc-step-size:
+ const: 1024
+
+ nand-ecc-strength:
+ enum: [16, 24, 40, 60, 70]
+ description:
+ The ECC configurations that can be supported are as follows.
+ - NFCv900(PX30 and RK3326) support ecc strength 16, 40, 60 and 70.
+ - NFCv600(RK3066 and RK2928) support ecc strength 16, 24, 40 and 60.
+ - NFCv622(RK3036 and RK3128) support ecc strength 16, 24, 40 and 60.
+ - NFCv800(RK3308 and RV1108) support ecc strength 16.
+
+ nand-bus-width:
+ const: 8
+
+ rockchip,boot-blks:
+ minimum: 2
+ default: 16
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ The NFC driver need this information to select ECC
+ algorithms supported by the BOOTROM.
+ Only used in combination with 'nand-is-boot-medium'.
+
+ rockchip,boot-ecc-strength:
+ enum: [16, 24, 40, 60, 70]
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ If specified it indicates that a different BCH/ECC setting is
+ supported by the BOOTROM.
+ - NFCv900(PX30 and RK3326) support ecc strength 16 and 70.
+ - NFCv600(RK3066 and RK2928) support ecc strength 16, 24, 40 and 60.
+ - NFCv622(RK3036 and RK3128) support ecc strength 16, 24, 40 and 60.
+ - NFCv800(RK3308 and RV1108) support ecc strength 16.
+ Only used in combination with 'nand-is-boot-medium'.
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+
+examples:
+ - |
+ #include <dt-bindings/clock/rk3308-cru.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ nfc: nand-controller@...b0000 {
+ compatible = "rockchip,rk3308-nfc",
+ "rockchip,rv1108-nfc";
+ reg = <0x0 0xff4b0000 0x0 0x4000>;
+ interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_NANDC>, <&cru SCLK_NANDC>;
+ clock-names = "ahb", "nfc";
+ assigned-clocks = <&clks SCLK_NANDC>;
+ assigned-clock-rates = <150000000>;
+
+ pinctrl-0 = <&flash_ale &flash_bus8 &flash_cle &flash_csn0
+ &flash_rdn &flash_rdy &flash_wrn>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ nand@0 {
+ reg = <0>;
+ label = "rk-nand";
+ nand-bus-width = <8>;
+ nand-ecc-mode = "hw";
+ nand-ecc-step-size = <1024>;
+ nand-ecc-strength = <16>;
+ nand-is-boot-medium;
+ rockchip,boot-blks = <8>;
+ rockchip,boot-ecc-strength = <16>;
+ };
+ };
+
+...
--
2.17.1
Powered by blists - more mailing lists