| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20200610044446.GA8540@b29397-desktop>
Date: Wed, 10 Jun 2020 04:44:22 +0000
From: Peter Chen <peter.chen@....com>
To: Macpaul Lin <macpaul.lin@...iatek.com>
CC: Felipe Balbi <balbi@...nel.org>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Matthias Brugger <matthias.bgg@...il.com>,
Alan Stern <stern@...land.harvard.edu>,
Bart Van Assche <bvanassche@....org>,
Mediatek WSD Upstream <wsd_upstream@...iatek.com>,
Macpaul Lin <macpaul.lin@...il.com>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
"linux-usb@...r.kernel.org" <linux-usb@...r.kernel.org>,
"linux-mediatek@...ts.infradead.org"
<linux-mediatek@...ts.infradead.org>,
Justin Hsieh <justinhsieh@...gle.com>,
Hakieyin Hsieh <hakieyin@...il.com>
Subject: Re: [PATCH] usb/gadget/function: introduce Built-in CDROM support
On 20-06-10 10:32:29, Macpaul Lin wrote:
> Introduce Built-In CDROM (BICR) support.
> This feature depends on USB_CONFIGFS_MASS_STORAGE option.
>
> 1. Some settings and new function is introduced for BICR.
> 2. Some work around for adapting Android settings is intorduced as well.
%s/intorduced/introduced
> --- a/drivers/usb/gadget/function/f_mass_storage.c
> +++ b/drivers/usb/gadget/function/f_mass_storage.c
> @@ -315,6 +315,9 @@ struct fsg_common {
> void *private_data;
>
> char inquiry_string[INQUIRY_STRING_LEN];
> +
> + /* For build-in CDROM */
> + u8 bicr;
> };
>
> struct fsg_dev {
> @@ -369,6 +372,10 @@ static void set_bulk_out_req_length(struct fsg_common *common,
> if (rem > 0)
> length += common->bulk_out_maxpacket - rem;
> bh->outreq->length = length;
> +
> + /* some USB 2.0 hardware requires this setting */
> + if (IS_ENABLED(USB_CONFIGFS_BICR))
> + bh->outreq->short_not_ok = 1;
> }
Why not use fsg_common.bicr instead of MACRO?
Peter
>
>
> @@ -527,7 +534,16 @@ static int fsg_setup(struct usb_function *f,
> w_length != 1)
> return -EDOM;
> VDBG(fsg, "get max LUN\n");
> - *(u8 *)req->buf = _fsg_common_get_max_lun(fsg->common);
> + if (IS_ENABLED(USB_CONFIGFS_BICR) && fsg->common->bicr) {
> + /*
> + * When Built-In CDROM is enabled,
> + * we share only one LUN.
> + */
> + *(u8 *)req->buf = 0;
> + } else {
> + *(u8 *)req->buf = _fsg_common_get_max_lun(fsg->common);
> + }
> + INFO(fsg, "get max LUN = %d\n", *(u8 *)req->buf);
>
> /* Respond with data/status */
> req->length = min((u16)1, w_length);
> @@ -1329,7 +1345,7 @@ static int do_start_stop(struct fsg_common *common)
> }
>
> /* Are we allowed to unload the media? */
> - if (curlun->prevent_medium_removal) {
> + if (!curlun->nofua && curlun->prevent_medium_removal) {
> LDBG(curlun, "unload attempt prevented\n");
> curlun->sense_data = SS_MEDIUM_REMOVAL_PREVENTED;
> return -EINVAL;
> @@ -2692,6 +2708,7 @@ int fsg_common_set_cdev(struct fsg_common *common,
> common->ep0 = cdev->gadget->ep0;
> common->ep0req = cdev->req;
> common->cdev = cdev;
> + common->bicr = 0;
>
> us = usb_gstrings_attach(cdev, fsg_strings_array,
> ARRAY_SIZE(fsg_strings));
> @@ -2895,6 +2912,33 @@ static void fsg_common_release(struct fsg_common *common)
> kfree(common);
> }
>
> +#ifdef USB_CONFIGFS_BICR
> +ssize_t fsg_bicr_show(struct fsg_common *common, char *buf)
> +{
> + return sprintf(buf, "%d\n", common->bicr);
> +}
> +
> +ssize_t fsg_bicr_store(struct fsg_common *common, const char *buf, size_t size)
> +{
> + int ret;
> +
> + ret = kstrtou8(buf, 10, &common->bicr);
> + if (ret)
> + return -EINVAL;
> +
> + /* Set Lun[0] is a CDROM when enable bicr.*/
> + if (!strcmp(buf, "1"))
> + common->luns[0]->cdrom = 1;
> + else {
> + common->luns[0]->cdrom = 0;
> + common->luns[0]->blkbits = 0;
> + common->luns[0]->blksize = 0;
> + common->luns[0]->num_sectors = 0;
> + }
> +
> + return size;
> +}
> +#endif
>
> /*-------------------------------------------------------------------------*/
>
> @@ -3463,6 +3507,7 @@ void fsg_config_from_params(struct fsg_config *cfg,
> lun->ro = !!params->ro[i];
> lun->cdrom = !!params->cdrom[i];
> lun->removable = !!params->removable[i];
> + lun->nofua = !!params->nofua[i];
> lun->filename =
> params->file_count > i && params->file[i][0]
> ? params->file[i]
> diff --git a/drivers/usb/gadget/function/f_mass_storage.h b/drivers/usb/gadget/function/f_mass_storage.h
> index 3b8c4ce2a40a..7097e2ea5cc9 100644
> --- a/drivers/usb/gadget/function/f_mass_storage.h
> +++ b/drivers/usb/gadget/function/f_mass_storage.h
> @@ -140,5 +140,8 @@ void fsg_common_set_inquiry_string(struct fsg_common *common, const char *vn,
> void fsg_config_from_params(struct fsg_config *cfg,
> const struct fsg_module_parameters *params,
> unsigned int fsg_num_buffers);
> -
> +#ifdef CONFIG_USB_CONFIGFS_BICR
> +ssize_t fsg_bicr_show(struct fsg_common *common, char *buf);
> +ssize_t fsg_bicr_store(struct fsg_common *common, const char *buf, size_t size);
> +#endif
> #endif /* USB_F_MASS_STORAGE_H */
> diff --git a/drivers/usb/gadget/function/storage_common.c b/drivers/usb/gadget/function/storage_common.c
> index f7e6c42558eb..8fe96eeddf35 100644
> --- a/drivers/usb/gadget/function/storage_common.c
> +++ b/drivers/usb/gadget/function/storage_common.c
> @@ -441,6 +441,29 @@ ssize_t fsg_store_file(struct fsg_lun *curlun, struct rw_semaphore *filesem,
> return -EBUSY; /* "Door is locked" */
> }
>
> + pr_notice("%s file=%s, count=%d, curlun->cdrom=%d\n",
> + __func__, buf, (int)count, curlun->cdrom);
> +
> + /*
> + * WORKAROUND for Android:
> + * VOLD would clean the file path after switching to bicr.
> + * So when the lun is being a CD-ROM a.k.a. BICR.
> + * Don't clean the file path to empty.
> + */
> + if (curlun->cdrom == 1 && count == 1)
> + return count;
> +
> + /*
> + * WORKAROUND: Should be closed the fsg lun for virtual cd-rom,
> + * when switch to other usb functions.
> + * Use the special keyword "off", because the init can
> + * not parse the char '\n' in rc file and write into the sysfs.
> + */
> + if (count == 3 &&
> + buf[0] == 'o' && buf[1] == 'f' && buf[2] == 'f' &&
> + fsg_lun_is_open(curlun))
> + ((char *) buf)[0] = 0;
> +
> /* Remove a trailing newline */
> if (count > 0 && buf[count-1] == '\n')
> ((char *) buf)[count-1] = 0; /* Ugh! */
> --
> 2.18.0
--
Thanks,
Peter Chen
Powered by blists - more mailing lists