| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAPBb6MXdbEgWtOx_b5ab3hOTdyPPaGDQ2kA21pLjoLE-2sjuTg@mail.gmail.com>
Date: Wed, 10 Jun 2020 15:46:18 +0900
From: Alexandre Courbot <acourbot@...omium.org>
To: Rob Herring <robh@...nel.org>,
Tiffany Lin <tiffany.lin@...iatek.com>
Cc: Yong Wu <yong.wu@...iatek.com>,
Matthias Brugger <matthias.bgg@...il.com>,
Joerg Roedel <joro@...tes.org>,
Evan Green <evgreen@...omium.org>,
Robin Murphy <robin.murphy@....com>,
Tomasz Figa <tfiga@...gle.com>,
Will Deacon <will.deacon@....com>,
"moderated list:ARM/Mediatek SoC support"
<linux-mediatek@...ts.infradead.org>, srv_heupstream@...iatek.com,
devicetree@...r.kernel.org, LKML <linux-kernel@...r.kernel.org>,
"moderated list:ARM/Mediatek SoC support"
<linux-arm-kernel@...ts.infradead.org>,
iommu@...ts.linux-foundation.org, youlin.pei@...iatek.com,
Nicolas Boichat <drinkcat@...omium.org>,
Matthias Kaehlcke <mka@...omium.org>, anan.sun@...iatek.com,
cui.zhang@...iatek.com, chao.hao@...iatek.com,
ming-fan.chen@...iatek.com, eizan@...omium.org,
Maoguang Meng <maoguang.meng@...iatek.com>,
Hsin-Yi Wang <hsinyi@...omium.org>,
Irui Wang <irui.wang@...iatek.com>
Subject: Re: [PATCH v4 01/17] media: dt-binding: mtk-vcodec: Separating
mtk-vcodec encode node.
On Wed, Jun 10, 2020 at 6:21 AM Rob Herring <robh@...nel.org> wrote:
>
> On Sat, May 30, 2020 at 04:10:02PM +0800, Yong Wu wrote:
> > From: Maoguang Meng <maoguang.meng@...iatek.com>
> >
> > Update binding document since the avc and vp8 hardware encoder in
> > mt8173 are now separated. Separate "mediatek,mt8173-vcodec-enc" to
> > "mediatek,mt8173-vcodec-vp8-enc" and "mediatek,mt8173-vcodec-avc-enc".
>
> The h/w suddenly split in 2? You are breaking compatibility. Up to the
> Mediatek maintainers to decide if that's okay, but you need to state you
> are breaking compatibility (here and in the driver) and why that is
> okay.
In my understanding there is no real hardware using the old bindings
at the moment, and the split is indeed a reflection of the actual
hardware layout. Tiffany, can you give your acked-by if this change is
ok with you?
>
> >
> > This is a preparing patch for smi cleaning up "mediatek,larb".
> >
> > Signed-off-by: Maoguang Meng <maoguang.meng@...iatek.com>
> > Signed-off-by: Hsin-Yi Wang <hsinyi@...omium.org>
> > Signed-off-by: Irui Wang <irui.wang@...iatek.com>
> > Signed-off-by: Yong Wu <yong.wu@...iatek.com>
> > ---
> > .../devicetree/bindings/media/mediatek-vcodec.txt | 58 ++++++++++++----------
> > 1 file changed, 31 insertions(+), 27 deletions(-)
> >
> > diff --git a/Documentation/devicetree/bindings/media/mediatek-vcodec.txt b/Documentation/devicetree/bindings/media/mediatek-vcodec.txt
> > index 8093335..1023740 100644
> > --- a/Documentation/devicetree/bindings/media/mediatek-vcodec.txt
> > +++ b/Documentation/devicetree/bindings/media/mediatek-vcodec.txt
> > @@ -4,7 +4,9 @@ Mediatek Video Codec is the video codec hw present in Mediatek SoCs which
> > supports high resolution encoding and decoding functionalities.
> >
> > Required properties:
> > -- compatible : "mediatek,mt8173-vcodec-enc" for MT8173 encoder
> > +- compatible : must be one of the following string:
> > + "mediatek,mt8173-vcodec-vp8-enc" for mt8173 vp8 encoder.
> > + "mediatek,mt8173-vcodec-avc-enc" for mt8173 avc encoder.
> > "mediatek,mt8183-vcodec-enc" for MT8183 encoder.
> > "mediatek,mt8173-vcodec-dec" for MT8173 decoder.
> > - reg : Physical base address of the video codec registers and length of
> > @@ -13,10 +15,11 @@ Required properties:
> > - mediatek,larb : must contain the local arbiters in the current Socs.
> > - clocks : list of clock specifiers, corresponding to entries in
> > the clock-names property.
> > -- clock-names: encoder must contain "venc_sel_src", "venc_sel",,
> > - "venc_lt_sel_src", "venc_lt_sel", decoder must contain "vcodecpll",
> > - "univpll_d2", "clk_cci400_sel", "vdec_sel", "vdecpll", "vencpll",
> > - "venc_lt_sel", "vdec_bus_clk_src".
> > +- clock-names:
> > + avc venc must contain "venc_sel";
> > + vp8 venc must contain "venc_lt_sel";
> > + decoder must contain "vcodecpll", "univpll_d2", "clk_cci400_sel",
> > + "vdec_sel", "vdecpll", "vencpll", "venc_lt_sel", "vdec_bus_clk_src".
> > - iommus : should point to the respective IOMMU block with master port as
> > argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.txt
> > for details.
> > @@ -80,14 +83,10 @@ vcodec_dec: vcodec@...00000 {
> > assigned-clock-rates = <0>, <0>, <0>, <1482000000>, <800000000>;
> > };
> >
> > - vcodec_enc: vcodec@...02000 {
> > - compatible = "mediatek,mt8173-vcodec-enc";
> > - reg = <0 0x18002000 0 0x1000>, /*VENC_SYS*/
> > - <0 0x19002000 0 0x1000>; /*VENC_LT_SYS*/
> > - interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_LOW>,
> > - <GIC_SPI 202 IRQ_TYPE_LEVEL_LOW>;
> > - mediatek,larb = <&larb3>,
> > - <&larb5>;
> > +vcodec_enc: vcodec@...02000 {
> > + compatible = "mediatek,mt8173-vcodec-avc-enc";
> > + reg = <0 0x18002000 0 0x1000>;
> > + interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_LOW>;
> > iommus = <&iommu M4U_PORT_VENC_RCPU>,
> > <&iommu M4U_PORT_VENC_REC>,
> > <&iommu M4U_PORT_VENC_BSDMA>,
> > @@ -98,8 +97,20 @@ vcodec_dec: vcodec@...00000 {
> > <&iommu M4U_PORT_VENC_REF_LUMA>,
> > <&iommu M4U_PORT_VENC_REF_CHROMA>,
> > <&iommu M4U_PORT_VENC_NBM_RDMA>,
> > - <&iommu M4U_PORT_VENC_NBM_WDMA>,
> > - <&iommu M4U_PORT_VENC_RCPU_SET2>,
> > + <&iommu M4U_PORT_VENC_NBM_WDMA>;
> > + mediatek,larb = <&larb3>;
> > + mediatek,vpu = <&vpu>;
> > + clocks = <&topckgen CLK_TOP_VENC_SEL>;
> > + clock-names = "venc_sel";
> > + assigned-clocks = <&topckgen CLK_TOP_VENC_SEL>;
> > + assigned-clock-parents = <&topckgen CLK_TOP_VCODECPLL>;
> > + };
> > +
> > +vcodec_enc_lt: vcodec@...02000 {
> > + compatible = "mediatek,mt8173-vcodec-vp8-enc";
> > + reg = <0 0x19002000 0 0x1000>; /* VENC_LT_SYS */
> > + interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_LOW>;
> > + iommus = <&iommu M4U_PORT_VENC_RCPU_SET2>,
> > <&iommu M4U_PORT_VENC_REC_FRM_SET2>,
> > <&iommu M4U_PORT_VENC_BSDMA_SET2>,
> > <&iommu M4U_PORT_VENC_SV_COMA_SET2>,
> > @@ -108,17 +119,10 @@ vcodec_dec: vcodec@...00000 {
> > <&iommu M4U_PORT_VENC_CUR_CHROMA_SET2>,
> > <&iommu M4U_PORT_VENC_REF_LUMA_SET2>,
> > <&iommu M4U_PORT_VENC_REC_CHROMA_SET2>;
> > + mediatek,larb = <&larb5>;
> > mediatek,vpu = <&vpu>;
> > - clocks = <&topckgen CLK_TOP_VENCPLL_D2>,
> > - <&topckgen CLK_TOP_VENC_SEL>,
> > - <&topckgen CLK_TOP_UNIVPLL1_D2>,
> > - <&topckgen CLK_TOP_VENC_LT_SEL>;
> > - clock-names = "venc_sel_src",
> > - "venc_sel",
> > - "venc_lt_sel_src",
> > - "venc_lt_sel";
> > - assigned-clocks = <&topckgen CLK_TOP_VENC_SEL>,
> > - <&topckgen CLK_TOP_VENC_LT_SEL>;
> > - assigned-clock-parents = <&topckgen CLK_TOP_VENCPLL_D2>,
> > - <&topckgen CLK_TOP_UNIVPLL1_D2>;
> > + clocks = <&topckgen CLK_TOP_VENC_LT_SEL>;
> > + clock-names = "venc_lt_sel";
> > + assigned-clocks = <&topckgen CLK_TOP_VENC_LT_SEL>;
> > + assigned-clock-parents = <&topckgen CLK_TOP_VCODECPLL_370P5>;
> > };
> > --
> > 1.9.1
Powered by blists - more mailing lists