linux-kernel - Re: [PATCH v4 02/11] mfd: Add support for Kontron sl28cpld management controller

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20200610075615.GT4106@dell>
Date:   Wed, 10 Jun 2020 08:56:15 +0100
From:   Lee Jones <lee.jones@...aro.org>
To:     Michael Walle <michael@...le.cc>
Cc:     Andy Shevchenko <andy.shevchenko@...il.com>,
        Ranjani Sridharan <ranjani.sridharan@...ux.intel.com>,
        david.m.ertman@...el.com, shiraz.saleem@...el.com,
        Rob Herring <robh+dt@...nel.org>,
        Mark Brown <broonie@...nel.org>,
        "open list:GPIO SUBSYSTEM" <linux-gpio@...r.kernel.org>,
        devicetree <devicetree@...r.kernel.org>,
        Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
        linux-hwmon@...r.kernel.org, linux-pwm@...r.kernel.org,
        linux-watchdog@...r.kernel.org,
        linux-arm Mailing List <linux-arm-kernel@...ts.infradead.org>,
        Linus Walleij <linus.walleij@...aro.org>,
        Bartosz Golaszewski <bgolaszewski@...libre.com>,
        Jean Delvare <jdelvare@...e.com>,
        Guenter Roeck <linux@...ck-us.net>,
        Thierry Reding <thierry.reding@...il.com>,
        Uwe Kleine-König 
        <u.kleine-koenig@...gutronix.de>,
        Wim Van Sebroeck <wim@...ux-watchdog.org>,
        Shawn Guo <shawnguo@...nel.org>, Li Yang <leoyang.li@....com>,
        Thomas Gleixner <tglx@...utronix.de>,
        Jason Cooper <jason@...edaemon.net>,
        Marc Zyngier <maz@...nel.org>,
        Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        Andy Shevchenko <andriy.shevchenko@...ux.intel.com>
Subject: Re: [PATCH v4 02/11] mfd: Add support for Kontron sl28cpld
 management controller

On Wed, 10 Jun 2020, Michael Walle wrote:

> Am 2020-06-10 09:19, schrieb Lee Jones:
> > On Wed, 10 Jun 2020, Michael Walle wrote:
> > > Am 2020-06-09 21:45, schrieb Lee Jones:
> > > > On Tue, 09 Jun 2020, Michael Walle wrote:
> > > > > > We do not need a 'simple-regmap' solution for your use-case.
> > > > > >
> > > > > > Since your device's registers are segregated, just split up the
> > > > > > register map and allocate each sub-device with it's own slice.
> > > > >
> > > > > I don't get it, could you make a device tree example for my
> > > > > use-case? (see also above)
> > > >
> > > >     &i2cbus {
> > > >         mfd-device@10 {
> > > >             compatible = "simple-mfd";
> > > >             reg = <10>;
> > > >
> > > >             sub-device@10 {
> > > >                 compatible = "vendor,sub-device";
> > > >                 reg = <10>;
> > > >             };
> > > >    };
> > > >
> > > > The Regmap config would be present in each of the child devices.
> > > >
> > > > Each child device would call devm_regmap_init_i2c() in .probe().
> > > 
> > > Ah, I see. If I'm not wrong, this still means to create an i2c
> > > device driver with the name "simple-mfd".
> > 
> > Yes, it does.
> > 
> > > Besides that, I don't like this, because:
> > >  - Rob already expressed its concerns with "simple-mfd" and so on.
> > 
> > Where did this take place?  I'd like to read up on this.
> 
> In this thread:
> https://lore.kernel.org/linux-devicetree/20200604211039.12689-1-michael@walle.cc/T/#m16fdba5962069e7cd4aa817582ee358c9fe2ecbf
> 
> > 
> > >  - you need to duplicate the config in each sub device
> > 
> > You can have a share a single config.
> > 
> > >  - which also means you are restricting the sub devices to be
> > >    i2c only (unless you implement and duplicate other regmap configs,
> > >    too). For this driver, SPI and MMIO may be viable options.
> > 
> > You could also have a shared implementation to choose between different
> > busses.
> 
> Then what is the difference between to have this shared config in the
> parent driver only and use the functions which are already there, i.e.
> dev_get_regmap(parent). But see, below, I'll wait with what you're
> coming up.

The difference is the omission of an otherwise pointless/superfluous
driver.  Actually, it's the difference between the omission of 10
pointless drivers!

> > > Thus, I'd rather implement a simple-mfd.c which implement a common
> > > I2C driver for now and populate its children using
> > > devm_of_platform_populate(). This could be extended to support other
> > > type of regmaps like SPI in the future.
> > > 
> > > Also some MFD drivers could be moved to this, a likely candidate is
> > > the smsc-ece1099.c. Although I don't really understand its purpose,
> > > if don't have CONFIG_OF.
> > > 
> > > Judging from the existing code, this simple-mfd.c wouldn't just be
> > > "a list of compatible" strings but also additional quirks and tweaks
> > > for particular devices in this list.
> > 
> > Hold off on the simple-mfd.c idea, as I'm not taken by it yet and
> > wouldn't want you to waste your time.  I have another idea which would
> > help.  Give me a few days to put something together.
> 
> Sure. I'm just glad there is now a discussion about this issue.

It's very much in my mind.

I've been meaning to do something about it for quite some time.

-- 
Lee Jones [李琼斯]
Senior Technical Lead - Developer Services
Linaro.org │ Open source software for Arm SoCs
Follow Linaro: Facebook | Twitter | Blog