| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 10 Jun 2020 12:25:14 +0200
From: Sebastian Andrzej Siewior <bigeasy@...utronix.de>
To: Stephen Berman <stephen.berman@....net>
Cc: Thomas Gleixner <tglx@...utronix.de>,
Peter Zijlstra <peterz@...radead.org>,
linux-kernel@...r.kernel.org
Subject: Re: power-off delay/hang due to commit 6d25be57 (mainline)
On 2020-06-10 10:21:29 [+0200], Stephen Berman wrote:
> (GMX put your email into my spam folder, so I didn't see it before I
> sent my followup about removing the wifi firmware.)
okay.
> On Tue, 9 Jun 2020 22:23:39 +0200 Sebastian Andrzej Siewior <bigeasy@...utronix.de> wrote:
> > scripts/decode_stacktrace.sh vmlinux $(pwd)/ kernel_power_off+0x3d/0x70
> >
> > should reveal that.
>
> I saved the call trace lines to a file and did this (with `$(pwd)/' the
> script did not run):
>
> steve [ /sources/linux-5.6.4 ]$ ./scripts/decode_stacktrace.sh vmlinux . kernel_power_off+0x3d/0x70 < /home/steve/temp/call_trace
> [1352.***] Call Trace:
> [1352.***] ? __schedule (core.c:?)
> [1352.***] schedule (??:?)
> [1352.***] schedule_timeout (??:?)
> [1352.***] ? acpi_os_release_object (??:?)
> [1352.***] ? acpi_ut_update_object_reference (??:?)
> [1352.***] wait_for_completion (??:?)
> [1352.***] ? wake_up_q (??:?)
> [1352.***] flush_workqueue (??:?)
> [1352.***] kernel_power_off (??:?)
> [1352.***] __do_sys_reboot (reboot.c:?)
> [1352.***] ? do_send_sig_info (??:?)
> [1352.***] ? kill_pid_info (??:?)
> [1352.***] ? kill_something_info (signal.c:?)
> [1352.***] ? __x64_sys_kill (??:?)
> [1352.***] do_syscall_64 (??:?)
> [1352.***] entry_SYSCALL_64_after_hwframe (??:?)
> [1352.***] RIP: 0033:0x7f95dd6992c3
> [1352.***] Code: Bad RIP value.
> objdump: '/tmp/tmp.BlpNDdSQpG.o': No such file
>
> Did I do something wrong or do I need to pass certain compiler flags
> when building the kernel (when I build Emacs I pass CFLAGS='-Og -g3')?
the arguments last argument should not be kernel_power_off+0x3d/0x70. I
should have been entered after "enter" but you can also pipe the whole
file as you did.
If it gives you the ?? then might need
CONFIG_DEBUG_INFO
> > The system shutdowns. So you are facing something different. I am
> > surprised that the workqueue stall detector did not yell here. The patch
> > at the bottom should get rid of the sr warnings.
>
> But the cdrom seems to have nothing to do with power-off failing, since
> it happens even when the cdrom is detached (and hence there were no sr
> warnings in the log output), or am I misunderstanding you?
Yes. I think it has nothing todo with it, it is just something
irrelevant that I do understand now. Before that trace it looked like
AHCI is failing to continue.
> By the other patch do you mean the following? (This email was also put
> into my spam by GMX and AFAICT has not yet shown up on the vger list.)
Yes. But now that I played a little with it, I made dis:
diff --git a/kernel/workqueue.c b/kernel/workqueue.c
index 4e01c448b4b48..e09fc41e99fc3 100644
--- a/kernel/workqueue.c
+++ b/kernel/workqueue.c
@@ -2777,6 +2777,8 @@ void flush_workqueue(struct workqueue_struct *wq)
lock_map_acquire(&wq->lockdep_map);
lock_map_release(&wq->lockdep_map);
+ if (system_state > SYSTEM_RUNNING)
+ pr_err("Flushing %s\n", wq->name);
mutex_lock(&wq->mutex);
/*
@@ -2826,7 +2828,18 @@ void flush_workqueue(struct workqueue_struct *wq)
mutex_unlock(&wq->mutex);
- wait_for_completion(&this_flusher.done);
+ if (system_state > SYSTEM_RUNNING) {
+ int ret;
+try_again:
+ ret = wait_for_completion_timeout(&this_flusher.done, 3 * HZ);
+ pr_err("Flushing %s over, %d\n", wq->name, ret);
+ if (!ret) {
+ show_workqueue_state();
+ goto try_again;
+ }
+ } else {
+ wait_for_completion(&this_flusher.done);
+ }
/*
* Wake-up-and-cascade phase
@@ -3039,11 +3052,18 @@ static bool __flush_work(struct work_struct *work, bool from_cancel)
lock_map_release(&work->lockdep_map);
}
+ if (system_state > SYSTEM_RUNNING)
+ pr_err("Flush %pS\n", work->func);
+
if (start_flush_work(work, &barr, from_cancel)) {
wait_for_completion(&barr.done);
destroy_work_on_stack(&barr.work);
+ if (system_state > SYSTEM_RUNNING)
+ pr_err("Flush %pS done\n", work->func);
return true;
} else {
+ if (system_state > SYSTEM_RUNNING)
+ pr_err("Flush %pS done\n", work->func);
return false;
}
}
So you should have output like:
|[ 14.131696] Flushing events_freezable_power_
the flush that hangs
|[ 17.203246] Flushing events_freezable_power_ over, 0
It has been noticed (0 at the end)
|[ 17.203849] Showing busy workqueues and worker pools:
|[ 17.204400] workqueue events_freezable_power_: flags=0x84
|[ 17.205009] pwq 12: cpus=6 node=0 flags=0x0 nice=0 active=1/256 refcnt=2
|[ 17.205774] in-flight: 2147:disk_events_workfn
|[ 17.206268] workqueue kblockd: flags=0x18
|[ 17.206682] pwq 13: cpus=6 node=0 flags=0x0 nice=-20 active=1/256 refcnt=2
|[ 17.207428] pending: blk_mq_requeue_work
|[ 17.207958] pool 12: cpus=6 node=0 flags=0x0 nice=0 hung=2s workers=3 idle: 535 42
A dump of all pending worqueue items.
|[ 20.275239] Flushing events_freezable_power_ over, 0
|[ 20.275812] Showing busy workqueues and worker pools:
|[ 20.276385] workqueue events_freezable_power_: flags=0x84
|[ 20.276972] pwq 12: cpus=6 node=0 flags=0x0 nice=0 active=1/256 refcnt=2
|[ 20.277712] in-flight: 2147:disk_events_workfn
|[ 20.278245] workqueue kblockd: flags=0x18
|[ 20.278685] pwq 13: cpus=6 node=0 flags=0x0 nice=-20 active=1/256 refcnt=2
|[ 20.279471] pending: blk_mq_requeue_work
|[ 20.279989] pool 12: cpus=6 node=0 flags=0x0 nice=0 hung=5s workers=3 idle: 535 42
Another atempt. As you see `blk_mq_requeue_work' is references in both
outputs but it makes progress (it is scheduled multiple times). The item
`disk_events_workfn' stucks.
Sebastian
Powered by blists - more mailing lists