| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAKgpwJWp9St4B1xuT5qAns1_NFPjd+2_gozv=0j-g7J42dbCPg@mail.gmail.com>
Date: Wed, 10 Jun 2020 10:27:25 +0800
From: Jun Li <lijun.kernel@...il.com>
To: Wesley Cheng <wcheng@...eaurora.org>
Cc: Heikki Krogerus <heikki.krogerus@...ux.intel.com>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Mark Rutland <mark.rutland@....com>,
Rob Herring <robh+dt@...nel.org>, agross@...nel.org,
bjorn.andersson@...aro.org, lkml <linux-kernel@...r.kernel.org>,
linux-arm-msm@...r.kernel.org,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@...r.kernel.org>,
Linux USB List <linux-usb@...r.kernel.org>,
Jack Pham <jackp@...eaurora.org>, bryan.odonoghue@...aro.org
Subject: Re: [PATCH 1/3] usb: typec: Add QCOM PMIC typec detection driver
Hi,
Wesley Cheng <wcheng@...eaurora.org> 于2020年6月10日周三 上午5:00写道：
>
> The QCOM SPMI typec driver handles the role and orientation detection, and
> notifies client drivers using the USB role switch framework. It registers
> as a typec port, so orientation can be communicated using the typec switch
> APIs. The driver also registers the VBUS output regulator, so client
> drivers can enable the VBUS source when acting as a source/host.
>
> Signed-off-by: Wesley Cheng <wcheng@...eaurora.org>
> ---
> drivers/usb/typec/Kconfig | 11 ++
> drivers/usb/typec/Makefile | 1 +
> drivers/usb/typec/qcom-pmic-typec.c | 278 ++++++++++++++++++++++++++++++++++++
> 3 files changed, 290 insertions(+)
> create mode 100644 drivers/usb/typec/qcom-pmic-typec.c
>
> diff --git a/drivers/usb/typec/Kconfig b/drivers/usb/typec/Kconfig
> index 559dd06..8de2520 100644
> --- a/drivers/usb/typec/Kconfig
> +++ b/drivers/usb/typec/Kconfig
> @@ -73,6 +73,17 @@ config TYPEC_TPS6598X
> If you choose to build this driver as a dynamically linked module, the
> module will be called tps6598x.ko.
>
> +config TYPEC_QCOM_PMIC
> + tristate "Qualcomm PMIC USB typec driver"
> + depends on ARCH_QCOM
> + help
> + Driver for supporting role switch over the Qualcomm PMIC. This will
> + handle the type C role and orientation detection reported by the QCOM
> + PMIC if the PMIC has the capability to handle type C detection.
> +
> + It will also enable the VBUS output to connected devices when a
> + DFP connection is made.
> +
> source "drivers/usb/typec/mux/Kconfig"
>
> source "drivers/usb/typec/altmodes/Kconfig"
> diff --git a/drivers/usb/typec/Makefile b/drivers/usb/typec/Makefile
> index 7753a5c3..cceffd9 100644
> --- a/drivers/usb/typec/Makefile
> +++ b/drivers/usb/typec/Makefile
> @@ -6,4 +6,5 @@ obj-$(CONFIG_TYPEC_TCPM) += tcpm/
> obj-$(CONFIG_TYPEC_UCSI) += ucsi/
> obj-$(CONFIG_TYPEC_HD3SS3220) += hd3ss3220.o
> obj-$(CONFIG_TYPEC_TPS6598X) += tps6598x.o
> +obj-$(CONFIG_TYPEC_QCOM_PMIC) += qcom-pmic-typec.o
> obj-$(CONFIG_TYPEC) += mux/
> diff --git a/drivers/usb/typec/qcom-pmic-typec.c b/drivers/usb/typec/qcom-pmic-typec.c
> new file mode 100644
> index 0000000..ce6319c
> --- /dev/null
> +++ b/drivers/usb/typec/qcom-pmic-typec.c
> @@ -0,0 +1,278 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2020, The Linux Foundation. All rights reserved.
> + */
> +
> +#include <linux/err.h>
> +#include <linux/regmap.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/slab.h>
> +#include <linux/interrupt.h>
> +#include <linux/of_irq.h>
> +#include <linux/platform_device.h>
> +#include <linux/of_device.h>
> +#include <linux/usb/role.h>
> +#include <linux/usb/typec_mux.h>
> +#include <linux/workqueue.h>
> +#include <linux/regulator/consumer.h>
> +#include <linux/regulator/driver.h>
> +#include <linux/regulator/machine.h>
> +
> +#define DCDC_BASE 0x1100
> +#define CMD_OTG (DCDC_BASE + 0x40)
> +#define OTG_EN BIT(0)
> +#define OTG_CFG (DCDC_BASE + 0x53)
> +#define OTG_EN_SRC_CFG BIT(1)
> +
> +#define USB_BASE 0x1300
> +#define TYPE_C_CFG_REG (USB_BASE + 0x58)
> +#define BC12_START_ON_CC BIT(7)
> +
> +#define TYPEC_BASE 0x1500
> +#define TYPEC_MISC_STATUS (TYPEC_BASE + 0xb)
> +#define CC_ATTACHED BIT(0)
> +#define CC_ORIENTATION BIT(1)
> +#define SNK_SRC_MODE BIT(6)
> +#define TYPEC_MODE_CFG (TYPEC_BASE + 0x44)
> +#define TYPEC_DISABLE_CMD BIT(0)
> +#define EN_SNK_ONLY BIT(1)
> +#define EN_SRC_ONLY BIT(2)
> +#define EN_TRY_SNK BIT(4)
> +#define TYPEC_VCONN_CONTROL (TYPEC_BASE + 0x46)
> +#define VCONN_EN_SRC BIT(0)
> +#define VCONN_EN_VAL BIT(1)
> +#define TYPEC_EXIT_STATE_CFG (TYPEC_BASE + 0x50)
> +#define SEL_SRC_UPPER_REF BIT(2)
> +#define TYPEC_INTR_EN_CFG_1 (TYPEC_BASE + 0x5e)
> +#define TYPEC_INTR_EN_CFG_1_MASK GENMASK(0, 7)
> +
> +struct qcom_pmic_typec {
> + struct device *dev;
> + struct fwnode_handle *fwnode;
> + struct regmap *regmap;
> + struct work_struct bh_work;
> +
> + struct typec_capability *cap;
> + struct typec_port *port;
> + struct usb_role_switch *role_sw;
> +
> + struct regulator_desc usb_vbus_rdesc;
> + struct regulator_dev *usb_vbus_reg;
> +};
> +
> +static int qcom_pmic_typec_vbus_enable(struct qcom_pmic_typec *qcom_usb)
> +{
> + int rc;
> +
> + rc = regmap_update_bits(qcom_usb->regmap, CMD_OTG, OTG_EN, OTG_EN);
> + if (rc)
> + dev_err(qcom_usb->dev, "failed to update OTG_CTL\n");
> +
> + return rc;
> +}
> +
> +static int qcom_pmic_typec_vbus_disable(struct qcom_pmic_typec *qcom_usb)
> +{
> + int rc;
> +
> + rc = regmap_update_bits(qcom_usb->regmap, CMD_OTG, OTG_EN, 0);
> + if (rc)
> + dev_err(qcom_usb->dev, "failed to update OTG_CTL\n");
> +
> + return rc;
> +}
> +
> +void qcom_pmic_typec_bh_work(struct work_struct *w)
> +{
> + struct qcom_pmic_typec *qcom_usb = container_of(w,
> + struct qcom_pmic_typec,
> + bh_work);
> + enum typec_orientation orientation;
> + enum usb_role role;
> + unsigned int stat;
> +
> + regmap_read(qcom_usb->regmap, TYPEC_MISC_STATUS, &stat);
> +
> + if (stat & CC_ATTACHED) {
> + orientation = ((stat & CC_ORIENTATION) >> 1) ?
> + TYPEC_ORIENTATION_REVERSE :
> + TYPEC_ORIENTATION_NORMAL;
> + typec_set_orientation(qcom_usb->port, orientation);
> +
> + role = (stat & SNK_SRC_MODE) ? USB_ROLE_HOST : USB_ROLE_DEVICE;
> + if (role == USB_ROLE_HOST)
> + qcom_pmic_typec_vbus_enable(qcom_usb);
> + else
> + qcom_pmic_typec_vbus_disable(qcom_usb);
> +
> + usb_role_switch_set_role(qcom_usb->role_sw, role);
> + } else {
> + usb_role_switch_set_role(qcom_usb->role_sw, USB_ROLE_NONE);
> + qcom_pmic_typec_vbus_disable(qcom_usb);
> + }
> +}
> +
> +irqreturn_t qcom_pmic_typec_interrupt(int irq, void *_qcom_usb)
> +{
> + struct qcom_pmic_typec *qcom_usb = _qcom_usb;
> +
> + queue_work(system_power_efficient_wq, &qcom_usb->bh_work);
> +
> + return IRQ_HANDLED;
> +}
> +
> +static void qcom_pmic_typec_typec_hw_init(struct qcom_pmic_typec *qcom_usb)
> +{
> + u8 mode;
> +
> + regmap_update_bits(qcom_usb->regmap, TYPE_C_CFG_REG, BC12_START_ON_CC,
> + 0);
> + regmap_update_bits(qcom_usb->regmap, TYPEC_INTR_EN_CFG_1,
> + TYPEC_INTR_EN_CFG_1_MASK, 0);
> +
> + if (qcom_usb->cap->type != TYPEC_PORT_DRP)
> + mode = (qcom_usb->cap->type == TYPEC_PORT_SNK) ?
> + EN_SNK_ONLY : EN_SRC_ONLY;
> + else
> + mode = EN_TRY_SNK;
> + regmap_update_bits(qcom_usb->regmap, TYPEC_MODE_CFG,
> + EN_SNK_ONLY | EN_TRY_SNK | EN_SRC_ONLY, mode);
> +
> + regmap_update_bits(qcom_usb->regmap, TYPEC_VCONN_CONTROL,
> + VCONN_EN_SRC | VCONN_EN_VAL, VCONN_EN_SRC);
> + regmap_update_bits(qcom_usb->regmap, TYPEC_VCONN_CONTROL,
> + VCONN_EN_SRC | VCONN_EN_VAL, VCONN_EN_SRC);
> + regmap_update_bits(qcom_usb->regmap, TYPEC_EXIT_STATE_CFG,
> + SEL_SRC_UPPER_REF, SEL_SRC_UPPER_REF);
> + regmap_update_bits(qcom_usb->regmap, OTG_CFG, OTG_EN_SRC_CFG,
> + OTG_EN_SRC_CFG);
> +}
> +
> +static int qcom_pmic_typec_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct qcom_pmic_typec *qcom_usb;
> + struct typec_capability *cap;
> + const char *buf;
> + int ret, irq, role;
> +
> + qcom_usb = kzalloc(sizeof(*qcom_usb), GFP_KERNEL);
devm_kzalloc().
> + if (!qcom_usb)
> + return -ENOMEM;
> +
> + qcom_usb->dev = dev;
> +
> + qcom_usb->regmap = dev_get_regmap(dev->parent, NULL);
> + if (!qcom_usb->regmap) {
> + dev_err(dev, "Failed to get regmap\n");
> + return -EINVAL;
> + }
> +
> + irq = platform_get_irq(pdev, 0);
> + if (irq < 0) {
> + dev_err(dev, "Failed to get CC irq\n");
> + return -EINVAL;
> + }
> +
> + ret = devm_request_irq(qcom_usb->dev, irq, qcom_pmic_typec_interrupt,
> + IRQF_SHARED, "qcom-pmic-typec", qcom_usb);
> + if (ret) {
> + dev_err(&pdev->dev, "Could not request IRQ\n");
> + return ret;
> + }
> +
> + qcom_usb->fwnode = device_get_named_child_node(dev, "connector");
> + if (!qcom_usb->fwnode)
> + return -EINVAL;
> +
> + cap = kzalloc(sizeof(*cap), GFP_KERNEL);
devm_kzalloc().
> + if (!cap) {
> + ret = -ENOMEM;
> + goto err_put_node;
> + }
> +
> + ret = fwnode_property_read_string(qcom_usb->fwnode, "power-role", &buf);
> + if (!ret)
> + role = typec_find_port_power_role(buf);
if (role < 0)
> + else
> + role = TYPEC_PORT_SNK;
> + cap->type = role;
> +
> + ret = fwnode_property_read_string(qcom_usb->fwnode, "data-role", &buf);
> + if (!ret)
> + role = typec_find_port_data_role(buf);
if (role < 0)
> + else
> + role = TYPEC_PORT_UFP;
> + cap->data = role;
> +
> + cap->prefer_role = -1;
TYPEC_NO_PREFERRED_ROLE
> + cap->fwnode = qcom_usb->fwnode;
> + qcom_usb->port = typec_register_port(dev, cap);
> + if (IS_ERR(qcom_usb->port)) {
> + dev_err(dev, "Failed to register type c port %d\n",
> + IS_ERR(qcom_usb->port));
> + ret = PTR_ERR(qcom_usb->port);
dev_err(dev, , ret)?
Li Jun
> + goto err_put_node;
> + }
> +
> + qcom_usb->cap = cap;
> +
> + qcom_usb->role_sw = fwnode_usb_role_switch_get(qcom_usb->fwnode);
> + if (IS_ERR(qcom_usb->role_sw)) {
> + if (PTR_ERR(qcom_usb->role_sw) != -EPROBE_DEFER)
> + dev_err(dev, "failed to get role switch\n");
> + ret = PTR_ERR(qcom_usb->role_sw);
> + goto err_typec_port;
> + }
> +
> + INIT_WORK(&qcom_usb->bh_work, qcom_pmic_typec_bh_work);
> + platform_set_drvdata(pdev, qcom_usb);
> + qcom_pmic_typec_typec_hw_init(qcom_usb);
> +
> + queue_work(system_power_efficient_wq, &qcom_usb->bh_work);
> +
> + return 0;
> +
> +err_typec_port:
> + typec_unregister_port(qcom_usb->port);
> +err_put_node:
> + fwnode_handle_put(qcom_usb->fwnode);
> +
> + return ret;
> +}
> +
> +static int qcom_pmic_typec_remove(struct platform_device *pdev)
> +{
> + struct qcom_pmic_typec *qcom_usb = platform_get_drvdata(pdev);
> +
> + cancel_work_sync(&qcom_usb->bh_work);
> + usb_role_switch_set_role(qcom_usb->role_sw, USB_ROLE_NONE);
> + qcom_pmic_typec_vbus_disable(qcom_usb);
> +
> + typec_unregister_port(qcom_usb->port);
> + usb_role_switch_put(qcom_usb->role_sw);
> + fwnode_handle_put(qcom_usb->fwnode);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id qcom_pmic_typec_table[] = {
> + { .compatible = "qcom,pm8150b-usb-typec" },
> + { },
> +};
> +MODULE_DEVICE_TABLE(of, qcom_pmic_typec_table);
> +
> +static struct platform_driver qcom_pmic_typec = {
> + .driver = {
> + .name = "qcom,pmic-typec",
> + .of_match_table = qcom_pmic_typec_table,
> + },
> + .probe = qcom_pmic_typec_probe,
> + .remove = qcom_pmic_typec_remove,
> +};
> +
> +module_platform_driver(qcom_pmic_typec);
> +
> +MODULE_DESCRIPTION("QCOM PMIC USB type C driver");
> +MODULE_LICENSE("GPL v2");
> --
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project
>
Powered by blists - more mailing lists