[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <cover.1591816172.git.noodles@earth.li>
Date: Wed, 10 Jun 2020 20:13:36 +0100
From: Jonathan McDowell <noodles@...th.li>
To: Russell King - ARM Linux admin <linux@...linux.org.uk>
Cc: Andrew Lunn <andrew@...n.ch>,
Vivien Didelot <vivien.didelot@...il.com>,
Florian Fainelli <f.fainelli@...il.com>,
"David S. Miller" <davem@...emloft.net>,
Jakub Kicinski <kuba@...nel.org>, netdev@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: [RFC PATCH v3 0/2] net: dsa: qca8k: Improve SGMII interface handling
Ok, take 3. This splits out the PHYLINK change to a separate patch which
should have no effect on functionality, and then adds the SGMII clean-ups
(i.e. the missing initialisation) on top of that as a second patch.
As before, tested with a device where the CPU connection is RGMII (i.e.
the common current use case) + one where the CPU connection is SGMII. I
don't have any devices where the SGMII interface is brought out to
something other than the CPU.
v3:
- Move phylink changes to separate patch
- Address rmk review comments
v2:
- Switch to phylink
- Avoid need for device tree configuration options
Jonathan McDowell (2):
net: dsa: qca8k: Switch to PHYLINK instead of PHYLIB
net: dsa: qca8k: Improve SGMII interface handling
drivers/net/dsa/qca8k.c | 337 ++++++++++++++++++++++++++++------------
drivers/net/dsa/qca8k.h | 13 ++
2 files changed, 252 insertions(+), 98 deletions(-)
--
2.20.1
Powered by blists - more mailing lists