| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1591848735-12447-2-git-send-email-jacob.jun.pan@linux.intel.com>
Date: Wed, 10 Jun 2020 21:12:13 -0700
From: Jacob Pan <jacob.jun.pan@...ux.intel.com>
To: iommu@...ts.linux-foundation.org,
LKML <linux-kernel@...r.kernel.org>,
"Lu Baolu" <baolu.lu@...ux.intel.com>,
Joerg Roedel <joro@...tes.org>,
David Woodhouse <dwmw2@...radead.org>
Cc: Yi Liu <yi.l.liu@...el.com>, "Tian, Kevin" <kevin.tian@...el.com>,
Raj Ashok <ashok.raj@...el.com>,
Alex Williamson <alex.williamson@...hat.com>,
"Christoph Hellwig" <hch@...radead.org>,
Jean-Philippe Brucker <jean-philippe@...aro.com>,
Eric Auger <eric.auger@...hat.com>,
Jonathan Corbet <corbet@....net>,
Jacob Pan <jacob.jun.pan@...ux.intel.com>
Subject: [PATCH v2 1/3] docs: IOMMU user API
IOMMU UAPI is newly introduced to support communications between guest
virtual IOMMU and host IOMMU. There has been lots of discussions on how
it should work with VFIO UAPI and userspace in general.
This document is indended to clarify the UAPI design and usage. The
mechenics of how future extensions should be achieved are also covered
in this documentation.
Signed-off-by: Liu Yi L <yi.l.liu@...el.com>
Signed-off-by: Jacob Pan <jacob.jun.pan@...ux.intel.com>
---
Documentation/userspace-api/iommu.rst | 210 ++++++++++++++++++++++++++++++++++
1 file changed, 210 insertions(+)
create mode 100644 Documentation/userspace-api/iommu.rst
diff --git a/Documentation/userspace-api/iommu.rst b/Documentation/userspace-api/iommu.rst
new file mode 100644
index 000000000000..e95dc5a04a41
--- /dev/null
+++ b/Documentation/userspace-api/iommu.rst
@@ -0,0 +1,210 @@
+.. SPDX-License-Identifier: GPL-2.0
+.. iommu:
+
+=====================================
+IOMMU Userspace API
+=====================================
+
+IOMMU UAPI is used for virtualization cases where communications are
+needed between physical and virtual IOMMU drivers. For native
+usage, IOMMU is a system device which does not need to communicate
+with user space directly.
+
+The primary use cases are guest Shared Virtual Address (SVA) and
+guest IO virtual address (IOVA), wherein virtual IOMMU (vIOMMU) is
+required to communicate with the physical IOMMU in the host.
+
+.. contents:: :local:
+
+Functionalities
+====================================================
+Communications of user and kernel involve both directions. The
+supported user-kernel APIs are as follows:
+
+1. Alloc/Free PASID
+2. Bind/unbind guest PASID (e.g. Intel VT-d)
+3. Bind/unbind guest PASID table (e.g. ARM sMMU)
+4. Invalidate IOMMU caches
+5. Service page request
+
+Requirements
+====================================================
+The IOMMU UAPIs are generic and extensible to meet the following
+requirements:
+
+1. Emulated and para-virtualised vIOMMUs
+2. Multiple vendors (Intel VT-d, ARM sMMU, etc.)
+3. Extensions to the UAPI shall not break existing user space
+
+Interfaces
+====================================================
+Although the data structures defined in IOMMU UAPI are self-contained,
+there is no user API functions introduced. Instead, IOMMU UAPI is
+designed to work with existing user driver frameworks such as VFIO.
+
+Extension Rules & Precautions
+-----------------------------
+When IOMMU UAPI gets extended, the data structures can *only* be
+modified in two ways:
+
+1. Adding new fields by re-purposing the padding[] field. No size change.
+2. Adding new union members at the end. May increase in size.
+
+No new fields can be added *after* the variable size union in that it
+will break backward compatibility when offset moves. In both cases, a
+new flag must be accompanied with a new field such that the IOMMU
+driver can process the data based on the new flag. Version field is
+only reserved for the unlikely event of UAPI upgrade at its entirety.
+
+It's *always* the caller's responsibility to indicate the size of the
+structure passed by setting argsz appropriately.
+
+When IOMMU UAPI extension results in size increase, user such as VFIO
+has to handle the following scenarios:
+
+1. User and kernel has exact size match
+2. An older user with older kernel header (smaller UAPI size) running on a
+ newer kernel (larger UAPI size)
+3. A newer user with newer kernel header (larger UAPI size) running
+ on a older kernel.
+4. A malicious/misbehaving user pass illegal/invalid size but within
+ range. The data may contain garbage.
+
+
+Feature Checking
+----------------
+While launching a guest with vIOMMU, it is important to ensure that host
+can support the UAPI data structures to be used for vIOMMU-pIOMMU
+communications. Without the upfront compatibility checking, future
+faults are difficult to report even in normal conditions. For example,
+TLB invalidations should always succeed from vIOMMU's
+perspective. There is no architectural way to report back to the vIOMMU
+if the UAPI data is incompatible. For this reason the following IOMMU
+UAPIs cannot fail:
+
+1. Free PASID
+2. Unbind guest PASID
+3. Unbind guest PASID table (SMMU)
+4. Cache invalidate
+5. Page response
+
+User applications such as QEMU is expected to import kernel UAPI
+headers. Only backward compatibility is supported. For example, an
+older QEMU (with older kernel header) can run on newer kernel. Newer
+QEMU (with new kernel header) may fail on older kernel.
+
+IOMMU vendor driver should report the below features to IOMMU UAPI
+consumers (e.g. via VFIO).
+
+1. IOMMU_NESTING_FEAT_SYSWIDE_PASID
+2. IOMMU_NESTING_FEAT_BIND_PGTBL
+3. IOMMU_NESTING_FEAT_BIND_PASID_TABLE
+4. IOMMU_NESTING_FEAT_CACHE_INVLD
+5. IOMMU_NESTING_FEAT_PAGE_REQUEST
+
+Take VFIO as example, upon request from VFIO user space (e.g. QEMU),
+VFIO kernel code shall query IOMMU vendor driver for the support of
+the above features. Query result can then be reported back to the
+user-space caller. Details can be found in
+Documentation/driver-api/vfio.rst.
+
+
+Data Passing Example with VFIO
+------------------------------
+As the ubiquitous userspace driver framework, VFIO is already IOMMU
+aware and share many key concepts such as device model, group, and
+protection domain. Other user driver frameworks can also be extended
+to support IOMMU UAPI but it is outside the scope of this document.
+
+In this tight-knit VFIO-IOMMU interface, the ultimate consumer of the
+IOMMU UAPI data is the host IOMMU driver. VFIO facilitates user-kernel
+transport, capability checking, security, and life cycle management of
+process address space ID (PASID).
+
+Unlike normal user data passed via VFIO UAPI IOTCL, IOMMU driver is the
+ultimate consumer of its UAPI data. At VFIO layer, the IOMMU UAPI data
+is wrapped in a VFIO UAPI data for sanity checking. It follows the
+pattern below:
+
+::
+
+ struct {
+ __u32 argsz;
+ __u32 flags;
+ __u8 data[];
+ }
+
+Here data[] contains the IOMMU UAPI data structures.
+
+In order to determine the size and feature set of the user data, argsz
+and flags are also embedded in the IOMMU UAPI data structures.
+A "__u32 argsz" field is *always* at the beginning of each structure.
+
+For example:
+::
+
+ struct iommu_gpasid_bind_data {
+ __u32 argsz;
+ __u32 version;
+ #define IOMMU_PASID_FORMAT_INTEL_VTD 1
+ __u32 format;
+ #define IOMMU_SVA_GPASID_VAL (1 << 0)
+ __u64 flags;
+ __u64 gpgd;
+ __u64 hpasid;
+ __u64 gpasid;
+ __u32 addr_width;
+ __u8 padding[12];
+ /* Vendor specific data */
+ union {
+ struct iommu_gpasid_bind_data_vtd vtd;
+ };
+ };
+
+Use bind guest PASID as an example, VFIO code shall process IOMMU UAPI
+request as follows:
+
+::
+
+ 1 /* Minsz must include IOMMU UAPI "argsz" of __u32 */
+ 2 minsz = offsetofend(struct vfio_iommu_type1_bind, flags) +
+ sizeof(u32);
+ 3 copy_from_user(&vfio_bind, (void __user *)arg, minsz);
+ 4
+ 5 /* Check VFIO argsz */
+ 6 if (vfio_bind.argsz < minsz)
+ 7 return -EINVAL;
+ 8
+ 9 /* VFIO flags must be included in minsz */
+ 10 switch (vfio_bind.flags) {
+ 11 case VFIO_IOMMU_BIND_GUEST_PGTBL:
+ 12 /*
+ 13 * Get the current IOMMU bind GPASID data size,
+ 14 * which accounted for the largest union member.
+ 15 */
+ 16 data_size = sizeof(struct iommu_gpasid_bind_data);
+ 17 iommu_argsz = vfio_bind.argsz - minsz;
+ 18 if (iommu_argsz > data_size) {
+ 19 /* User data > current kernel */
+ 20 return -E2BIG;
+ 21 }
+ 22 copy_from_user(&iommu_bind, (void __user *)
+ 23 vfio_bind.data, iommu_argsz);
+ 24 /*
+ 25 * Deal with trailing bytes that is bigger than user
+ 26 * provided UAPI size but smaller than the current
+ 27 * kernel data size. Zero fill the trailing bytes.
+ 28 */
+ 29 memset(iommu_bind + iommu_argsz, 0, data_size -
+ 30 iommu_argsz;
+ 31
+ 32 iommu_sva_bind_gpasid(domain, dev, iommu_bind_data);
+ 33 break;
+
+
+Case #1 & 2 are supported per backward compatibility rule.
+
+Case #3 will fail with -E2BIG at line #20. Case
+
+Case #4 may result in other error processed by IOMMU vendor driver. However,
+the damage shall not exceed the scope of the offending user.
--
2.7.4
Powered by blists - more mailing lists