linux-kernel - [PATCH v4 23/27] Revert "clk: bcm2835: remove pllb"

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <2795d7ad33c9eba631fb356df7ff075ee5e8a0b8.1591860665.git-series.maxime@cerno.tech>
Date:   Thu, 11 Jun 2020 09:32:12 +0200
From:   Maxime Ripard <maxime@...no.tech>
To:     Nicolas Saenz Julienne <nsaenzjulienne@...e.de>
Cc:     linux-rpi-kernel@...ts.infradead.org,
        bcm-kernel-feedback-list@...adcom.com,
        linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
        Dave Stevenson <dave.stevenson@...pberrypi.com>,
        Tim Gover <tim.gover@...pberrypi.com>,
        Phil Elwell <phil@...pberrypi.com>,
        Mike Turquette <mturquette@...libre.com>,
        Stephen Boyd <sboyd@...nel.org>, linux-clk@...r.kernel.org,
        Maxime Ripard <maxime@...no.tech>
Subject: [PATCH v4 23/27] Revert "clk: bcm2835: remove pllb"

This reverts commit 2256d89333bd17b8b56b42734a7e1046d52f7fc3. Since we
will be expanding the firmware clock driver, we'll need to remove the
quirks to deal with the PLLB. However, we still want to expose the clock
tree properly, so having that clock in the MMIO driver will allow that.

Signed-off-by: Maxime Ripard <maxime@...no.tech>
---
 drivers/clk/bcm/clk-bcm2835.c | 30 ++++++++++++++++++++++++++----
 1 file changed, 26 insertions(+), 4 deletions(-)

diff --git a/drivers/clk/bcm/clk-bcm2835.c b/drivers/clk/bcm/clk-bcm2835.c
index 6bb7efa12037..32f5c13be9d1 100644
--- a/drivers/clk/bcm/clk-bcm2835.c
+++ b/drivers/clk/bcm/clk-bcm2835.c
@@ -1684,10 +1684,32 @@ static const struct bcm2835_clk_desc clk_desc_array[] = {
 		.fixed_divider = 1,
 		.flags = CLK_SET_RATE_PARENT),
 
-	/*
-	 * PLLB is used for the ARM's clock. Controlled by firmware, see
-	 * clk-raspberrypi.c.
-	 */
+	/* PLLB is used for the ARM's clock. */
+	[BCM2835_PLLB]		= REGISTER_PLL(
+		SOC_ALL,
+		.name = "pllb",
+		.cm_ctrl_reg = CM_PLLB,
+		.a2w_ctrl_reg = A2W_PLLB_CTRL,
+		.frac_reg = A2W_PLLB_FRAC,
+		.ana_reg_base = A2W_PLLB_ANA0,
+		.reference_enable_mask = A2W_XOSC_CTRL_PLLB_ENABLE,
+		.lock_mask = CM_LOCK_FLOCKB,
+
+		.ana = &bcm2835_ana_default,
+
+		.min_rate = 600000000u,
+		.max_rate = 3000000000u,
+		.max_fb_rate = BCM2835_MAX_FB_RATE),
+	[BCM2835_PLLB_ARM]	= REGISTER_PLL_DIV(
+		SOC_ALL,
+		.name = "pllb_arm",
+		.source_pll = "pllb",
+		.cm_reg = CM_PLLB,
+		.a2w_reg = A2W_PLLB_ARM,
+		.load_mask = CM_PLLB_LOADARM,
+		.hold_mask = CM_PLLB_HOLDARM,
+		.fixed_divider = 1,
+		.flags = CLK_SET_RATE_PARENT),
 
 	/*
 	 * PLLC is the core PLL, used to drive the core VPU clock.
-- 
git-series 0.9.1