linux-kernel - [PATCH v4 12/27] clk: bcm: rpi: Use CCF boundaries instead of rolling our own

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Thu, 11 Jun 2020 09:32:01 +0200
From:   Maxime Ripard <maxime@...no.tech>
To:     Nicolas Saenz Julienne <nsaenzjulienne@...e.de>
Cc:     linux-rpi-kernel@...ts.infradead.org,
        bcm-kernel-feedback-list@...adcom.com,
        linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
        Dave Stevenson <dave.stevenson@...pberrypi.com>,
        Tim Gover <tim.gover@...pberrypi.com>,
        Phil Elwell <phil@...pberrypi.com>,
        Mike Turquette <mturquette@...libre.com>,
        Stephen Boyd <sboyd@...nel.org>, linux-clk@...r.kernel.org,
        Maxime Ripard <maxime@...no.tech>
Subject: [PATCH v4 12/27] clk: bcm: rpi: Use CCF boundaries instead of rolling our own

The raspberrypi firmware clock driver has a min_rate / max_rate clamping by
storing the info it needs in a private structure.

However, the CCF already provides such a facility, so we can switch to it
to remove the boilerplate.

Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@...e.de>
Signed-off-by: Maxime Ripard <maxime@...no.tech>
---
 drivers/clk/bcm/clk-raspberrypi.c | 18 ++++++++----------
 1 file changed, 8 insertions(+), 10 deletions(-)

diff --git a/drivers/clk/bcm/clk-raspberrypi.c b/drivers/clk/bcm/clk-raspberrypi.c
index a20492fade6a..e135ad28d38d 100644
--- a/drivers/clk/bcm/clk-raspberrypi.c
+++ b/drivers/clk/bcm/clk-raspberrypi.c
@@ -36,9 +36,6 @@ struct raspberrypi_clk {
 	struct rpi_firmware *firmware;
 	struct platform_device *cpufreq;
 
-	unsigned long min_rate;
-	unsigned long max_rate;
-
 	struct clk_hw pllb;
 };
 
@@ -142,13 +139,11 @@ static int raspberrypi_fw_pll_set_rate(struct clk_hw *hw, unsigned long rate,
 static int raspberrypi_pll_determine_rate(struct clk_hw *hw,
 					  struct clk_rate_request *req)
 {
-	struct raspberrypi_clk *rpi = container_of(hw, struct raspberrypi_clk,
-						   pllb);
 	u64 div, final_rate;
 	u32 ndiv, fdiv;
 
 	/* We can't use req->rate directly as it would overflow */
-	final_rate = clamp(req->rate, rpi->min_rate, rpi->max_rate);
+	final_rate = clamp(req->rate, req->min_rate, req->max_rate);
 
 	div = (u64)final_rate << A2W_PLL_FRAC_BITS;
 	do_div(div, req->best_parent_rate);
@@ -215,12 +210,15 @@ static int raspberrypi_register_pllb(struct raspberrypi_clk *rpi)
 	dev_info(rpi->dev, "CPU frequency range: min %u, max %u\n",
 		 min_rate, max_rate);
 
-	rpi->min_rate = min_rate * RPI_FIRMWARE_PLLB_ARM_DIV_RATE;
-	rpi->max_rate = max_rate * RPI_FIRMWARE_PLLB_ARM_DIV_RATE;
-
 	rpi->pllb.init = &init;
 
-	return devm_clk_hw_register(rpi->dev, &rpi->pllb);
+	ret = devm_clk_hw_register(rpi->dev, &rpi->pllb);
+	if (!ret)
+		clk_hw_set_rate_range(&rpi->pllb,
+				      min_rate * RPI_FIRMWARE_PLLB_ARM_DIV_RATE,
+				      max_rate * RPI_FIRMWARE_PLLB_ARM_DIV_RATE);
+
+	return ret;
 }
 
 static struct clk_fixed_factor raspberrypi_clk_pllb_arm = {
-- 
git-series 0.9.1