[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CA+h21hqyAKucPENVANwuNo-UuCY0W3z8QF1FZ-nhd0uQ8tyC+w@mail.gmail.com>
Date: Thu, 11 Jun 2020 12:01:25 +0300
From: Vladimir Oltean <olteanv@...il.com>
To: Russell King - ARM Linux admin <linux@...linux.org.uk>
Cc: Jonathan McDowell <noodles@...th.li>, Andrew Lunn <andrew@...n.ch>,
Vivien Didelot <vivien.didelot@...il.com>,
Florian Fainelli <f.fainelli@...il.com>,
"David S. Miller" <davem@...emloft.net>,
Jakub Kicinski <kuba@...nel.org>,
netdev <netdev@...r.kernel.org>,
lkml <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH 1/2] net: dsa: qca8k: Switch to PHYLINK instead of PHYLIB
Hi Russell,
On Thu, 11 Jun 2020 at 11:57, Russell King - ARM Linux admin
<linux@...linux.org.uk> wrote:
>
>
> Alternatively, phylink supports polling mode, but due to the layered
> way DSA is written, DSA drivers don't have access to that as that is
> in the DSA upper levels in net/dsa/slave.c (dsa_slave_phy_setup(),
> it would be dp->pl_config.pcs_poll).
>
They do, see https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next.git/tree/drivers/net/dsa/ocelot/felix.c#n606
>
> --
> RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
> FTTC for 0.8m (est. 1762m) line in suburbia: sync at 13.1Mbps down 503kbps up
Thanks,
-Vladimir
Powered by blists - more mailing lists