Message-ID: <2b514d05-bf44-645d-6335-81e140e64e57@linux.intel.com>
Date:   Thu, 11 Jun 2020 11:57:06 +0200
From:   Maarten Lankhorst <maarten.lankhorst@...ux.intel.com>
To:     Daniel Vetter <daniel.vetter@...ll.ch>,
        DRI Development <dri-devel@...ts.freedesktop.org>
Cc:     Intel Graphics Development <intel-gfx@...ts.freedesktop.org>,
        LKML <linux-kernel@...r.kernel.org>, linux-rdma@...r.kernel.org,
        amd-gfx@...ts.freedesktop.org,
        Mika Kuoppala <mika.kuoppala@...el.com>,
        Thomas Hellstrom <thomas.hellstrom@...el.com>,
        linux-media@...r.kernel.org, linaro-mm-sig@...ts.linaro.org,
        Chris Wilson <chris@...is-wilson.co.uk>,
        Christian König <christian.koenig@....com>,
        Daniel Vetter <daniel.vetter@...el.com>
Subject: Re: [PATCH] dma-fence: basic lockdep annotations

Op 05-06-2020 om 15:29 schreef Daniel Vetter:
> Design is similar to the lockdep annotations for workers, but with
> some twists:
>
> - We use a read-lock for the execution/worker/completion side, so that
>   this explicit annotation can be more liberally sprinkled around.
>   With read locks lockdep isn't going to complain if the read-side
>   isn't nested the same way under all circumstances, so ABBA deadlocks
>   are ok. Which they are, since this is an annotation only.
>
> - We're using non-recursive lockdep read lock mode, since in recursive
>   read lock mode lockdep does not catch read side hazards. And we
>   _very_ much want read side hazards to be caught. For full details of
>   this limitation see
>
>   commit e91498589746065e3ae95d9a00b068e525eec34f
>   Author: Peter Zijlstra <peterz@...radead.org>
>   Date:   Wed Aug 23 13:13:11 2017 +0200
>
>       locking/lockdep/selftests: Add mixed read-write ABBA tests
>
> - To allow nesting of the read-side explicit annotations we explicitly
>   keep track of the nesting. lock_is_held() allows us to do that.
>
> - The wait-side annotation is a write lock, and entirely done within
>   dma_fence_wait() for everyone by default.
>
> - To be able to freely annotate helper functions I want to make it ok
>   to call dma_fence_begin/end_signalling from soft/hardirq context.
>   First attempt was using the hardirq locking context for the write
>   side in lockdep, but this forces all normal spinlocks nested within
>   dma_fence_begin/end_signalling to be spinlocks. That bollocks.
>
>   The approach now is to simple check in_atomic(), and for these cases
>   entirely rely on the might_sleep() check in dma_fence_wait(). That
>   will catch any wrong nesting against spinlocks from soft/hardirq
>   contexts.
>
> The idea here is that every code path that's critical for eventually
> signalling a dma_fence should be annotated with
> dma_fence_begin/end_signalling. The annotation ideally starts right
> after a dma_fence is published (added to a dma_resv, exposed as a
> sync_file fd, attached to a drm_syncobj fd, or anything else that
> makes the dma_fence visible to other kernel threads), up to and
> including the dma_fence_wait(). Examples are irq handlers, the
> scheduler rt threads, the tail of execbuf (after the corresponding
> fences are visible), any workers that end up signalling dma_fences and
> really anything else. Not annotated should be code paths that only
> complete fences opportunistically as the gpu progresses, like e.g.
> shrinker/eviction code.
>
> The main class of deadlocks this is supposed to catch are:
>
> Thread A:
>
> 	mutex_lock(A);
> 	mutex_unlock(A);
>
> 	dma_fence_signal();
>
> Thread B:
>
> 	mutex_lock(A);
> 	dma_fence_wait();
> 	mutex_unlock(A);
>
> Thread B is blocked on A signalling the fence, but A never gets around
> to that because it cannot acquire the lock A.
>
> Note that dma_fence_wait() is allowed to be nested within
> dma_fence_begin/end_signalling sections. To allow this to happen the
> read lock needs to be upgraded to a write lock, which means that any
> other lock is acquired between the dma_fence_begin_signalling() call and
> the call to dma_fence_wait(), and still held, this will result in an
> immediate lockdep complaint. The only other option would be to not
> annotate such calls, defeating the point. Therefore these annotations
> cannot be sprinkled over the code entirely mindless to avoid false
> positives.
>
> Originally I hope that the cross-release lockdep extensions would
> alleviate the need for explicit annotations:
>
> https://lwn.net/Articles/709849/
>
> But there's a few reasons why that's not an option:
>
> - It's not happening in upstream, since it got reverted due to too
>   many false positives:
>
> 	commit e966eaeeb623f09975ef362c2866fae6f86844f9
> 	Author: Ingo Molnar <mingo@...nel.org>
> 	Date:   Tue Dec 12 12:31:16 2017 +0100
>
> 	    locking/lockdep: Remove the cross-release locking checks
>
> 	    This code (CONFIG_LOCKDEP_CROSSRELEASE=y and CONFIG_LOCKDEP_COMPLETIONS=y),
> 	    while it found a number of old bugs initially, was also causing too many
> 	    false positives that caused people to disable lockdep - which is arguably
> 	    a worse overall outcome.
>
> - cross-release uses the complete() call to annotate the end of
>   critical sections, for dma_fence that would be dma_fence_signal().
>   But we do not want all dma_fence_signal() calls to be treated as
>   critical, since many are opportunistic cleanup of gpu requests. If
>   these get stuck there's still the main completion interrupt and
>   workers who can unblock everyone. Automatically annotating all
>   dma_fence_signal() calls would hence cause false positives.
>
> - cross-release had some educated guesses for when a critical section
>   starts, like fresh syscall or fresh work callback. This would again
>   cause false positives without explicit annotations, since for
>   dma_fence the critical sections only starts when we publish a fence.
>
> - Furthermore there can be cases where a thread never does a
>   dma_fence_signal, but is still critical for reaching completion of
>   fences. One example would be a scheduler kthread which picks up jobs
>   and pushes them into hardware, where the interrupt handler or
>   another completion thread calls dma_fence_signal(). But if the
>   scheduler thread hangs, then all the fences hang, hence we need to
>   manually annotate it. cross-release aimed to solve this by chaining
>   cross-release dependencies, but the dependency from scheduler thread
>   to the completion interrupt handler goes through hw where
>   cross-release code can't observe it.
>
> In short, without manual annotations and careful review of the start
> and end of critical sections, cross-relese dependency tracking doesn't
> work. We need explicit annotations.
>
> v2: handle soft/hardirq ctx better against write side and dont forget
> EXPORT_SYMBOL, drivers can't use this otherwise.
>
> v3: Kerneldoc.
>
> v4: Some spelling fixes from Mika
>
> v5: Amend commit message to explain in detail why cross-release isn't
> the solution.
>
> Cc: Mika Kuoppala <mika.kuoppala@...el.com>
> Cc: Thomas Hellstrom <thomas.hellstrom@...el.com>
> Cc: linux-media@...r.kernel.org
> Cc: linaro-mm-sig@...ts.linaro.org
> Cc: linux-rdma@...r.kernel.org
> Cc: amd-gfx@...ts.freedesktop.org
> Cc: intel-gfx@...ts.freedesktop.org
> Cc: Chris Wilson <chris@...is-wilson.co.uk>
> Cc: Maarten Lankhorst <maarten.lankhorst@...ux.intel.com>
> Cc: Christian König <christian.koenig@....com>
> Signed-off-by: Daniel Vetter <daniel.vetter@...el.com>
> ---
>  Documentation/driver-api/dma-buf.rst |  12 +-
>  drivers/dma-buf/dma-fence.c          | 161 +++++++++++++++++++++++++++
>  include/linux/dma-fence.h            |  12 ++
>  3 files changed, 182 insertions(+), 3 deletions(-)
>
> diff --git a/Documentation/driver-api/dma-buf.rst b/Documentation/driver-api/dma-buf.rst
> index 63dec76d1d8d..05d856131140 100644
> --- a/Documentation/driver-api/dma-buf.rst
> +++ b/Documentation/driver-api/dma-buf.rst
> @@ -100,11 +100,11 @@ CPU Access to DMA Buffer Objects
>  .. kernel-doc:: drivers/dma-buf/dma-buf.c
>     :doc: cpu access
>  
> -Fence Poll Support
> -~~~~~~~~~~~~~~~~~~
> +Implicit Fence Poll Support
> +~~~~~~~~~~~~~~~~~~~~~~~~~~~
>  
>  .. kernel-doc:: drivers/dma-buf/dma-buf.c
> -   :doc: fence polling
> +   :doc: implicit fence polling
>  
>  Kernel Functions and Structures Reference
>  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> @@ -133,6 +133,12 @@ DMA Fences
>  .. kernel-doc:: drivers/dma-buf/dma-fence.c
>     :doc: DMA fences overview
>  
> +DMA Fence Signalling Annotations
> +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> +
> +.. kernel-doc:: drivers/dma-buf/dma-fence.c
> +   :doc: fence signalling annotation
> +
>  DMA Fences Functions Reference
>  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>  
> diff --git a/drivers/dma-buf/dma-fence.c b/drivers/dma-buf/dma-fence.c
> index 656e9ac2d028..0005bc002529 100644
> --- a/drivers/dma-buf/dma-fence.c
> +++ b/drivers/dma-buf/dma-fence.c
> @@ -110,6 +110,160 @@ u64 dma_fence_context_alloc(unsigned num)
>  }
>  EXPORT_SYMBOL(dma_fence_context_alloc);
>  
> +/**
> + * DOC: fence signalling annotation
> + *
> + * Proving correctness of all the kernel code around &dma_fence through code
> + * review and testing is tricky for a few reasons:
> + *
> + * * It is a cross-driver contract, and therefore all drivers must follow the
> + *   same rules for lock nesting order, calling contexts for various functions
> + *   and anything else significant for in-kernel interfaces. But it is also
> + *   impossible to test all drivers in a single machine, hence brute-force N vs.
> + *   N testing of all combinations is impossible. Even just limiting to the
> + *   possible combinations is infeasible.
> + *
> + * * There is an enormous amount of driver code involved. For render drivers
> + *   there's the tail of command submission, after fences are published,
> + *   scheduler code, interrupt and workers to process job completion,
> + *   and timeout, gpu reset and gpu hang recovery code. Plus for integration
> + *   with core mm with have &mmu_notifier, respectively &mmu_interval_notifier,
> + *   and &shrinker. For modesetting drivers there's the commit tail functions
> + *   between when fences for an atomic modeset are published, and when the
> + *   corresponding vblank completes, including any interrupt processing and
> + *   related workers. Auditing all that code, across all drivers, is not
> + *   feasible.
> + *
> + * * Due to how many other subsystems are involved and the locking hierarchies
> + *   this pulls in there is extremely thin wiggle-room for driver-specific
> + *   differences. &dma_fence interacts with almost all of the core memory
> + *   handling through page fault handlers via &dma_resv, dma_resv_lock() and
> + *   dma_resv_unlock(). On the other side it also interacts through all
> + *   allocation sites through &mmu_notifier and &shrinker.
> + *
> + * Furthermore lockdep does not handle cross-release dependencies, which means
> + * any deadlocks between dma_fence_wait() and dma_fence_signal() can't be caught
> + * at runtime with some quick testing. The simplest example is one thread
> + * waiting on a &dma_fence while holding a lock::
> + *
> + *     lock(A);
> + *     dma_fence_wait(B);
> + *     unlock(A);
> + *
> + * while the other thread is stuck trying to acquire the same lock, which
> + * prevents it from signalling the fence the previous thread is stuck waiting
> + * on::
> + *
> + *     lock(A);
> + *     unlock(A);
> + *     dma_fence_signal(B);
> + *
> + * By manually annotating all code relevant to signalling a &dma_fence we can
> + * teach lockdep about these dependencies, which also helps with the validation
> + * headache since now lockdep can check all the rules for us::
> + *
> + *    cookie = dma_fence_begin_signalling();
> + *    lock(A);
> + *    unlock(A);
> + *    dma_fence_signal(B);
> + *    dma_fence_end_signalling(cookie);
> + *
> + * For using dma_fence_begin_signalling() and dma_fence_end_signalling() to
> + * annotate critical sections the following rules need to be observed:
> + *
> + * * All code necessary to complete a &dma_fence must be annotated, from the
> + *   point where a fence is accessible to other threads, to the point where
> + *   dma_fence_signal() is called. Un-annotated code can contain deadlock issues,
> + *   and due to the very strict rules and many corner cases it is infeasible to
> + *   catch these just with review or normal stress testing.
> + *
> + * * &struct dma_resv deserves a special note, since the readers are only
> + *   protected by rcu. This means the signalling critical section starts as soon
> + *   as the new fences are installed, even before dma_resv_unlock() is called.
> + *
> + * * The only exception are fast paths and opportunistic signalling code, which
> + *   calls dma_fence_signal() purely as an optimization, but is not required to
> + *   guarantee completion of a &dma_fence. The usual example is a wait IOCTL
> + *   which calls dma_fence_signal(), while the mandatory completion path goes
> + *   through a hardware interrupt and possible job completion worker.
> + *
> + * * To aid composability of code, the annotations can be freely nested, as long
> + *   as the overall locking hierarchy is consistent. The annotations also work
> + *   both in interrupt and process context. Due to implementation details this
> + *   requires that callers pass an opaque cookie from
> + *   dma_fence_begin_signalling() to dma_fence_end_signalling().
> + *
> + * * Validation against the cross driver contract is implemented by priming
> + *   lockdep with the relevant hierarchy at boot-up. This means even just
> + *   testing with a single device is enough to validate a driver, at least as
> + *   far as deadlocks with dma_fence_wait() against dma_fence_signal() are
> + *   concerned.
> + */
> +#ifdef CONFIG_LOCKDEP
> +struct lockdep_map	dma_fence_lockdep_map = {
> +	.name = "dma_fence_map"
> +};
> +
> +/**
> + * dma_fence_begin_signalling - begin a critical DMA fence signalling section
> + *
> + * Drivers should use this to annotate the beginning of any code section
> + * required to eventually complete &dma_fence by calling dma_fence_signal().
> + *
> + * The end of these critical sections are annotated with
> + * dma_fence_end_signalling().
> + *
> + * Returns:
> + *
> + * Opaque cookie needed by the implementation, which needs to be passed to
> + * dma_fence_end_signalling().
> + */
> +bool dma_fence_begin_signalling(void)
> +{
> +	/* explicitly nesting ... */
> +	if (lock_is_held_type(&dma_fence_lockdep_map, 1))
> +		return true;
> +
> +	/* rely on might_sleep check for soft/hardirq locks */
> +	if (in_atomic())
> +		return true;
> +
> +	/* ... and non-recursive readlock */
> +	lock_acquire(&dma_fence_lockdep_map, 0, 0, 1, 1, NULL, _RET_IP_);
> +
> +	return false;
> +}
> +EXPORT_SYMBOL(dma_fence_begin_signalling);
> +
> +/**
> + * dma_fence_end_signalling - end a critical DMA fence signalling section
> + *
> + * Closes a critical section annotation opened by dma_fence_begin_signalling().
> + */
> +void dma_fence_end_signalling(bool cookie)
> +{
> +	if (cookie)
> +		return;
> +
> +	lock_release(&dma_fence_lockdep_map, _RET_IP_);
> +}
> +EXPORT_SYMBOL(dma_fence_end_signalling);
> +
> +void __dma_fence_might_wait(void)
> +{
> +	bool tmp;
> +
> +	tmp = lock_is_held_type(&dma_fence_lockdep_map, 1);
> +	if (tmp)
> +		lock_release(&dma_fence_lockdep_map, _THIS_IP_);
> +	lock_map_acquire(&dma_fence_lockdep_map);
> +	lock_map_release(&dma_fence_lockdep_map);
> +	if (tmp)
> +		lock_acquire(&dma_fence_lockdep_map, 0, 0, 1, 1, NULL, _THIS_IP_);
> +}
> +#endif
> +
> +
>  /**
>   * dma_fence_signal_locked - signal completion of a fence
>   * @fence: the fence to signal
> @@ -170,14 +324,19 @@ int dma_fence_signal(struct dma_fence *fence)
>  {
>  	unsigned long flags;
>  	int ret;
> +	bool tmp;
>  
>  	if (!fence)
>  		return -EINVAL;
>  
> +	tmp = dma_fence_begin_signalling();
> +
>  	spin_lock_irqsave(fence->lock, flags);
>  	ret = dma_fence_signal_locked(fence);
>  	spin_unlock_irqrestore(fence->lock, flags);
>  
> +	dma_fence_end_signalling(tmp);
> +
>  	return ret;
>  }
>  EXPORT_SYMBOL(dma_fence_signal);
> @@ -210,6 +369,8 @@ dma_fence_wait_timeout(struct dma_fence *fence, bool intr, signed long timeout)
>  
>  	might_sleep();
>  
> +	__dma_fence_might_wait();
> +
>  	trace_dma_fence_wait_start(fence);
>  	if (fence->ops->wait)
>  		ret = fence->ops->wait(fence, intr, timeout);
> diff --git a/include/linux/dma-fence.h b/include/linux/dma-fence.h
> index 3347c54f3a87..3f288f7db2ef 100644
> --- a/include/linux/dma-fence.h
> +++ b/include/linux/dma-fence.h
> @@ -357,6 +357,18 @@ dma_fence_get_rcu_safe(struct dma_fence __rcu **fencep)
>  	} while (1);
>  }
>  
> +#ifdef CONFIG_LOCKDEP
> +bool dma_fence_begin_signalling(void);
> +void dma_fence_end_signalling(bool cookie);
> +#else
> +static inline bool dma_fence_begin_signalling(void)
> +{
> +	return true;
> +}
> +static inline void dma_fence_end_signalling(bool cookie) {}
> +static inline void __dma_fence_might_wait(void) {}
> +#endif
> +
>  int dma_fence_signal(struct dma_fence *fence);
>  int dma_fence_signal_locked(struct dma_fence *fence);
>  signed long dma_fence_default_wait(struct dma_fence *fence,

As original author of dma-fence, I enjoy seeing more lockdep annotations. Fence was always meant to be cross-driver, so strict driver annotations that can be verified by lockdep are a good thing. Because drivers have to interact with other drivers that use dma-fence, the rules must be the same for everyone, and the above code makes sense.

Reviewed-by: Maarten Lankhorst <maarten.lankhorst@...ux.intel.com>

Powered by blists - more mailing lists