[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20200610190622.1.I66864be898aa835ccb66b6cd5220d0b082338a81@changeid>
Date: Wed, 10 Jun 2020 19:06:42 -0700
From: Abhishek Pandit-Subedi <abhishekpandit@...omium.org>
To: heiko@...ech.de, linux-rockchip@...ts.infradead.org
Cc: linux-bluetooth@...r.kernel.org,
chromeos-bluetooth-upstreaming@...omium.org, mka@...omium.org,
dianders@...omium.org,
Abhishek Pandit-Subedi <abhishekpandit@...omium.org>,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
Rob Herring <robh+dt@...nel.org>,
linux-arm-kernel@...ts.infradead.org
Subject: [PATCH] ARM: dts: rockchip: Add marvell BT irq config
Veyron Jaq and Mighty both use the Marvel 8897 WiFi+BT chip. Add wakeup
and pinctrl block to devicetree so the btmrvl driver can correctly
configure the wakeup interrupt.
Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@...omium.org>
Reviewed-by: Reviewed-by: Douglas Anderson <dianders@...omium.org>
---
The Veyron Mighty Chromebook (rk3288 based board) is missing the wake
configuration for Bluetooth. Without this change, the wake irq was not
configurable and wake on Bluetooth was broken.
I verified this change with additional changes in the Bluetooth driver
(the series is at https://patchwork.kernel.org/cover/11599101/). The
driver changes are not necessary for this dts change and shouldn't block
it.
arch/arm/boot/dts/rk3288-veyron-jaq.dts | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/arch/arm/boot/dts/rk3288-veyron-jaq.dts b/arch/arm/boot/dts/rk3288-veyron-jaq.dts
index 171ba6185b6d39..976c0c17a71199 100644
--- a/arch/arm/boot/dts/rk3288-veyron-jaq.dts
+++ b/arch/arm/boot/dts/rk3288-veyron-jaq.dts
@@ -51,6 +51,21 @@ &sdmmc {
&sdmmc_bus4>;
};
+&sdio0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ btmrvl: btmrvl@2 {
+ compatible = "marvell,sd8897-bt";
+ reg = <2>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <RK_PD7 IRQ_TYPE_LEVEL_LOW>;
+ marvell,wakeup-pin = /bits/ 16 <13>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&bt_host_wake_l>;
+ };
+};
+
&vcc_5v {
enable-active-high;
gpio = <&gpio7 RK_PC5 GPIO_ACTIVE_HIGH>;
--
2.27.0.278.ge193c7cf3a9-goog
Powered by blists - more mailing lists