[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20200611021246.3250-1-vadivel.muruganx.ramuthevar@linux.intel.com>
Date: Thu, 11 Jun 2020 10:12:44 +0800
From: "Ramuthevar,Vadivel MuruganX"
<vadivel.muruganx.ramuthevar@...ux.intel.com>
To: linux-kernel@...r.kernel.org, balbi@...nel.org,
p.zabel@...gutronix.de
Cc: gregkh@...uxfoundation.org, robh@...nel.org,
devicetree@...r.kernel.org, linux-usb@...r.kernel.org,
cheol.yong.kim@...el.com, qi-ming.wu@...el.com, yin1.li@...el.com,
andriy.shevchenko@...el.com,
"Ramuthevar,Vadivel MuruganX"
<vadivel.muruganx.ramuthevar@...ux.intel.com>
Subject: [PATCH v2 0/2] usb : phy: Add USB PHY support on Intel LGM SoC
The USB PHY provides the optimized for low power dissipation while active, idle, or on standby.
Requires minimal external components, a single resistor, for best operation.
Supports 10/5-Gbps high-speed data transmission rates through 3-m USB 3.x cable
---
v2:
- Address Phillip's review comments
- replace devm_reset_control_get() by devm_reset_control_get_exclusive()
- re-design the assert and deassert fucntion calls as per review comments
- address kbuild bot warnings
- add the comments
v1:
- initial version
---
dt-bindings: usb: Add USB PHY support for Intel LGM SoC
v2:
- No Change
v1:
- initial version
Ramuthevar Vadivel Murugan (2):
dt-bindings: usb: Add USB PHY support for Intel LGM SoC
usb: phy: Add USB3 PHY support for Intel LGM SoC
.../devicetree/bindings/usb/intel,lgm-usb-phy.yaml | 53 ++++
drivers/usb/phy/Kconfig | 11 +
drivers/usb/phy/Makefile | 1 +
drivers/usb/phy/phy-lgm-usb.c | 280 +++++++++++++++++++++
4 files changed, 345 insertions(+)
create mode 100644 Documentation/devicetree/bindings/usb/intel,lgm-usb-phy.yaml
create mode 100644 drivers/usb/phy/phy-lgm-usb.c
--
2.11.0
Powered by blists - more mailing lists