[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20200611191750.28096-8-a.fatoum@pengutronix.de>
Date: Thu, 11 Jun 2020 21:17:48 +0200
From: Ahmad Fatoum <a.fatoum@...gutronix.de>
To: Wim Van Sebroeck <wim@...ux-watchdog.org>,
Guenter Roeck <linux@...ck-us.net>
Cc: linux-watchdog@...r.kernel.org, kernel@...gutronix.de,
Ahmad Fatoum <a.fatoum@...gutronix.de>,
linux-kernel@...r.kernel.org
Subject: [PATCH v1 7/8] watchdog: f71808e_wdt: migrate to new kernel watchdog API
Migrating the driver lets us drop the watchdog misc device boilerplate
and reduce size by 270~ lines. It also brings us support for new
functionality like CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED.
This changes behavior on module unloading: Whereas before, the watchdog
was automatically stopped on module unload, now explicit stopping of
the watchdog before unload is required.
Signed-off-by: Ahmad Fatoum <a.fatoum@...gutronix.de>
---
drivers/watchdog/Kconfig | 1 +
drivers/watchdog/f71808e_wdt.c | 497 ++++++++-------------------------
2 files changed, 111 insertions(+), 387 deletions(-)
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 0663c604bd64..c312dd5fc0ca 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -1052,6 +1052,7 @@ config EBC_C384_WDT
config F71808E_WDT
tristate "Fintek F718xx, F818xx Super I/O Watchdog"
depends on X86
+ select WATCHDOG_CORE
help
This is the driver for the hardware watchdog on the Fintek F71808E,
F71862FG, F71868, F71869, F71882FG, F71889FG, F81803, F81865, and
diff --git a/drivers/watchdog/f71808e_wdt.c b/drivers/watchdog/f71808e_wdt.c
index 9299ad4d4a52..7c42cbf9912e 100644
--- a/drivers/watchdog/f71808e_wdt.c
+++ b/drivers/watchdog/f71808e_wdt.c
@@ -9,16 +9,10 @@
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/err.h>
-#include <linux/fs.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/ioport.h>
-#include <linux/miscdevice.h>
#include <linux/module.h>
-#include <linux/mutex.h>
-#include <linux/notifier.h>
-#include <linux/reboot.h>
-#include <linux/uaccess.h>
#include <linux/watchdog.h>
#define DRVNAME "f71808e_wdt"
@@ -129,23 +123,15 @@ struct f71808e_variant {
};
struct watchdog_data {
+ struct watchdog_device wdd;
unsigned short sioaddr;
const struct f71808e_variant *variant;
- unsigned long opened;
- struct mutex lock;
- char expect_close;
struct watchdog_info ident;
- unsigned short timeout;
u8 timer_val; /* content for the wd_time register */
char minutes_mode;
u8 pulse_val; /* pulse width flag */
char pulse_mode; /* enable pulse output mode? */
- char caused_reboot; /* last reboot was by the watchdog */
-};
-
-static struct watchdog_data watchdog = {
- .lock = __MUTEX_INITIALIZER(watchdog.lock),
};
static inline bool has_f81865_wdo_conf(struct watchdog_data *wd)
@@ -216,487 +202,225 @@ static inline void superio_exit(int base)
release_region(base, 2);
}
-static int watchdog_set_timeout(int timeout)
+static int watchdog_set_timeout(struct watchdog_device *wdd, unsigned int new_timeout)
{
- if (timeout <= 0
- || timeout > max_timeout) {
- pr_err("watchdog timeout out of range\n");
- return -EINVAL;
- }
+ struct watchdog_data *wd = watchdog_get_drvdata(wdd);
- mutex_lock(&watchdog.lock);
-
- watchdog.timeout = timeout;
- if (timeout > 0xff) {
- watchdog.timer_val = DIV_ROUND_UP(timeout, 60);
- watchdog.minutes_mode = true;
+ wdd->timeout = new_timeout;
+ if (new_timeout > 0xff) {
+ wd->timer_val = DIV_ROUND_UP(new_timeout, 60);
+ wd->minutes_mode = true;
} else {
- watchdog.timer_val = timeout;
- watchdog.minutes_mode = false;
+ wd->timer_val = new_timeout;
+ wd->minutes_mode = false;
}
- mutex_unlock(&watchdog.lock);
-
return 0;
}
-static int watchdog_set_pulse_width(unsigned int pw)
+static int watchdog_set_pulse_width(struct watchdog_data *wd, unsigned int pw)
{
- int err = 0;
unsigned int t1 = 25, t2 = 125, t3 = 5000;
- if (watchdog.variant->id == SIO_F71868_ID) {
+ if (wd->variant->id == SIO_F71868_ID) {
t1 = 30;
t2 = 150;
t3 = 6000;
}
- mutex_lock(&watchdog.lock);
-
if (pw <= 1) {
- watchdog.pulse_val = 0;
+ wd->pulse_val = 0;
} else if (pw <= t1) {
- watchdog.pulse_val = 1;
+ wd->pulse_val = 1;
} else if (pw <= t2) {
- watchdog.pulse_val = 2;
+ wd->pulse_val = 2;
} else if (pw <= t3) {
- watchdog.pulse_val = 3;
+ wd->pulse_val = 3;
} else {
pr_err("pulse width out of range\n");
- err = -EINVAL;
- goto exit_unlock;
+ return -EINVAL;
}
- watchdog.pulse_mode = pw;
+ wd->pulse_mode = pw;
-exit_unlock:
- mutex_unlock(&watchdog.lock);
- return err;
+ return 0;
}
-static int watchdog_keepalive(void)
+static int watchdog_keepalive(struct watchdog_device *wdd)
{
- int err = 0;
+ struct watchdog_data *wd = watchdog_get_drvdata(wdd);
+ int err;
- mutex_lock(&watchdog.lock);
- err = superio_enter(watchdog.sioaddr);
+ err = superio_enter(wd->sioaddr);
if (err)
- goto exit_unlock;
- superio_select(watchdog.sioaddr, SIO_F71808FG_LD_WDT);
+ return err;
+ superio_select(wd->sioaddr, SIO_F71808FG_LD_WDT);
- if (watchdog.minutes_mode)
+ if (wd->minutes_mode)
/* select minutes for timer units */
- superio_set_bit(watchdog.sioaddr, F71808FG_REG_WDT_CONF,
+ superio_set_bit(wd->sioaddr, F71808FG_REG_WDT_CONF,
F71808FG_FLAG_WD_UNIT);
else
/* select seconds for timer units */
- superio_clear_bit(watchdog.sioaddr, F71808FG_REG_WDT_CONF,
+ superio_clear_bit(wd->sioaddr, F71808FG_REG_WDT_CONF,
F71808FG_FLAG_WD_UNIT);
/* Set timer value */
- superio_outb(watchdog.sioaddr, F71808FG_REG_WD_TIME,
- watchdog.timer_val);
+ superio_outb(wd->sioaddr, F71808FG_REG_WD_TIME,
+ wd->timer_val);
- superio_exit(watchdog.sioaddr);
+ superio_exit(wd->sioaddr);
-exit_unlock:
- mutex_unlock(&watchdog.lock);
- return err;
+ return 0;
}
-static int watchdog_start(void)
+static int watchdog_start(struct watchdog_device *wdd)
{
+ struct watchdog_data *wd = watchdog_get_drvdata(wdd);
int err;
/* Make sure we don't die as soon as the watchdog is enabled below */
- err = watchdog_keepalive();
+ err = watchdog_keepalive(wdd);
if (err)
return err;
- mutex_lock(&watchdog.lock);
- err = superio_enter(watchdog.sioaddr);
+ err = superio_enter(wd->sioaddr);
if (err)
- goto exit_unlock;
- superio_select(watchdog.sioaddr, SIO_F71808FG_LD_WDT);
+ return err;
+ superio_select(wd->sioaddr, SIO_F71808FG_LD_WDT);
/* Watchdog pin configuration */
- watchdog.variant->pinconf(&watchdog);
+ wd->variant->pinconf(wd);
- superio_select(watchdog.sioaddr, SIO_F71808FG_LD_WDT);
- superio_set_bit(watchdog.sioaddr, SIO_REG_ENABLE, 0);
+ superio_select(wd->sioaddr, SIO_F71808FG_LD_WDT);
+ superio_set_bit(wd->sioaddr, SIO_REG_ENABLE, 0);
- if (has_f81865_wdo_conf(&watchdog))
- superio_set_bit(watchdog.sioaddr, F81865_REG_WDO_CONF,
+ if (has_f81865_wdo_conf(wd))
+ superio_set_bit(wd->sioaddr, F81865_REG_WDO_CONF,
F81865_FLAG_WDOUT_EN);
else
- superio_set_bit(watchdog.sioaddr, F71808FG_REG_WDO_CONF,
+ superio_set_bit(wd->sioaddr, F71808FG_REG_WDO_CONF,
F71808FG_FLAG_WDOUT_EN);
- superio_set_bit(watchdog.sioaddr, F71808FG_REG_WDT_CONF,
+ superio_set_bit(wd->sioaddr, F71808FG_REG_WDT_CONF,
F71808FG_FLAG_WD_EN);
- if (watchdog.pulse_mode) {
+ set_bit(WDOG_HW_RUNNING, &wdd->status);
+
+ if (wd->pulse_mode) {
/* Select "pulse" output mode with given duration */
- u8 wdt_conf = superio_inb(watchdog.sioaddr,
- F71808FG_REG_WDT_CONF);
+ u8 wdt_conf = superio_inb(wd->sioaddr, F71808FG_REG_WDT_CONF);
/* Set WD_PSWIDTH bits (1:0) */
- wdt_conf = (wdt_conf & 0xfc) | (watchdog.pulse_val & 0x03);
+ wdt_conf = (wdt_conf & 0xfc) | (wd->pulse_val & 0x03);
/* Set WD_PULSE to "pulse" mode */
wdt_conf |= BIT(F71808FG_FLAG_WD_PULSE);
- superio_outb(watchdog.sioaddr, F71808FG_REG_WDT_CONF,
- wdt_conf);
+ superio_outb(wd->sioaddr, F71808FG_REG_WDT_CONF, wdt_conf);
} else {
/* Select "level" output mode */
- superio_clear_bit(watchdog.sioaddr, F71808FG_REG_WDT_CONF,
- F71808FG_FLAG_WD_PULSE);
+ superio_clear_bit(wd->sioaddr, F71808FG_REG_WDT_CONF,
+ F71808FG_FLAG_WD_PULSE);
}
- superio_exit(watchdog.sioaddr);
-exit_unlock:
- mutex_unlock(&watchdog.lock);
+ superio_exit(wd->sioaddr);
return err;
}
-static int watchdog_stop(void)
-{
- int err = 0;
-
- mutex_lock(&watchdog.lock);
- err = superio_enter(watchdog.sioaddr);
- if (err)
- goto exit_unlock;
- superio_select(watchdog.sioaddr, SIO_F71808FG_LD_WDT);
-
- superio_clear_bit(watchdog.sioaddr, F71808FG_REG_WDT_CONF,
- F71808FG_FLAG_WD_EN);
-
- superio_exit(watchdog.sioaddr);
-
-exit_unlock:
- mutex_unlock(&watchdog.lock);
-
- return err;
-}
-
-static int watchdog_get_status(void)
-{
- int status = 0;
-
- mutex_lock(&watchdog.lock);
- status = (watchdog.caused_reboot) ? WDIOF_CARDRESET : 0;
- mutex_unlock(&watchdog.lock);
-
- return status;
-}
-
-static bool watchdog_is_running(void)
-{
- /*
- * if we fail to determine the watchdog's status assume it to be
- * running to be on the safe side
- */
- bool is_running = true;
-
- mutex_lock(&watchdog.lock);
- if (superio_enter(watchdog.sioaddr))
- goto exit_unlock;
- superio_select(watchdog.sioaddr, SIO_F71808FG_LD_WDT);
-
- is_running = (superio_inb(watchdog.sioaddr, SIO_REG_ENABLE) & BIT(0))
- && (superio_inb(watchdog.sioaddr, F71808FG_REG_WDT_CONF)
- & BIT(F71808FG_FLAG_WD_EN));
-
- superio_exit(watchdog.sioaddr);
-
-exit_unlock:
- mutex_unlock(&watchdog.lock);
- return is_running;
-}
-
-/* /dev/watchdog api */
-
-static int watchdog_open(struct inode *inode, struct file *file)
+static int watchdog_stop(struct watchdog_device *wdd)
{
+ struct watchdog_data *wd = watchdog_get_drvdata(wdd);
int err;
- /* If the watchdog is alive we don't need to start it again */
- if (test_and_set_bit(0, &watchdog.opened))
- return -EBUSY;
-
- err = watchdog_start();
- if (err) {
- clear_bit(0, &watchdog.opened);
+ err = superio_enter(wd->sioaddr);
+ if (err)
return err;
- }
+ superio_select(wd->sioaddr, SIO_F71808FG_LD_WDT);
- if (nowayout)
- __module_get(THIS_MODULE);
+ superio_clear_bit(wd->sioaddr, F71808FG_REG_WDT_CONF,
+ F71808FG_FLAG_WD_EN);
- watchdog.expect_close = 0;
- return stream_open(inode, file);
-}
-
-static int watchdog_release(struct inode *inode, struct file *file)
-{
- clear_bit(0, &watchdog.opened);
+ superio_exit(wd->sioaddr);
- if (!watchdog.expect_close) {
- watchdog_keepalive();
- pr_crit("Unexpected close, not stopping watchdog!\n");
- } else if (!nowayout) {
- watchdog_stop();
- }
return 0;
}
-/*
- * watchdog_write:
- * @file: file handle to the watchdog
- * @buf: buffer to write
- * @count: count of bytes
- * @ppos: pointer to the position to write. No seeks allowed
- *
- * A write to a watchdog device is defined as a keepalive signal. Any
- * write of data will do, as we we don't define content meaning.
- */
-
-static ssize_t watchdog_write(struct file *file, const char __user *buf,
- size_t count, loff_t *ppos)
-{
- if (count) {
- if (!nowayout) {
- size_t i;
-
- /* In case it was set long ago */
- bool expect_close = false;
-
- for (i = 0; i != count; i++) {
- char c;
- if (get_user(c, buf + i))
- return -EFAULT;
- if (c == 'V')
- expect_close = true;
- }
-
- /* Properly order writes across fork()ed processes */
- mutex_lock(&watchdog.lock);
- watchdog.expect_close = expect_close;
- mutex_unlock(&watchdog.lock);
- }
-
- /* someone wrote to us, we should restart timer */
- watchdog_keepalive();
- }
- return count;
-}
-
-/*
- * watchdog_ioctl:
- * @inode: inode of the device
- * @file: file handle to the device
- * @cmd: watchdog command
- * @arg: argument pointer
- *
- * The watchdog API defines a common set of functions for all watchdogs
- * according to their available features.
- */
-static long watchdog_ioctl(struct file *file, unsigned int cmd,
- unsigned long arg)
-{
- int status;
- int new_options;
- int new_timeout;
- union {
- struct watchdog_info __user *ident;
- int __user *i;
- } uarg;
-
- uarg.i = (int __user *)arg;
-
- switch (cmd) {
- case WDIOC_GETSUPPORT:
- return copy_to_user(uarg.ident, &watchdog.ident,
- sizeof(watchdog.ident)) ? -EFAULT : 0;
-
- case WDIOC_GETSTATUS:
- status = watchdog_get_status();
- if (status < 0)
- return status;
- return put_user(status, uarg.i);
-
- case WDIOC_GETBOOTSTATUS:
- return put_user(0, uarg.i);
-
- case WDIOC_SETOPTIONS:
- if (get_user(new_options, uarg.i))
- return -EFAULT;
-
- if (new_options & WDIOS_DISABLECARD)
- watchdog_stop();
-
- if (new_options & WDIOS_ENABLECARD)
- return watchdog_start();
- /* fall through */
-
- case WDIOC_KEEPALIVE:
- watchdog_keepalive();
- return 0;
-
- case WDIOC_SETTIMEOUT:
- if (get_user(new_timeout, uarg.i))
- return -EFAULT;
-
- if (watchdog_set_timeout(new_timeout))
- return -EINVAL;
-
- watchdog_keepalive();
- /* fall through */
-
- case WDIOC_GETTIMEOUT:
- return put_user(watchdog.timeout, uarg.i);
-
- default:
- return -ENOTTY;
-
- }
-}
+static const struct watchdog_ops f71808e_wdog_ops = {
+ .owner = THIS_MODULE,
+ .start = watchdog_start,
+ .stop = watchdog_stop,
+ .ping = watchdog_keepalive,
+ .set_timeout = watchdog_set_timeout,
+};
-static int watchdog_notify_sys(struct notifier_block *this, unsigned long code,
- void *unused)
+static bool watchdog_is_running(struct watchdog_data *wd, u8 wdt_conf)
{
- if (code == SYS_DOWN || code == SYS_HALT)
- watchdog_stop();
- return NOTIFY_DONE;
+ return (superio_inb(wd->sioaddr, SIO_REG_ENABLE) & BIT(0))
+ && (wdt_conf & BIT(F71808FG_FLAG_WD_EN));
}
-static const struct file_operations watchdog_fops = {
- .owner = THIS_MODULE,
- .llseek = no_llseek,
- .open = watchdog_open,
- .release = watchdog_release,
- .write = watchdog_write,
- .unlocked_ioctl = watchdog_ioctl,
- .compat_ioctl = compat_ptr_ioctl,
-};
-
-static struct miscdevice watchdog_miscdev = {
- .minor = WATCHDOG_MINOR,
- .name = "watchdog",
- .fops = &watchdog_fops,
-};
-
-static struct notifier_block watchdog_notifier = {
- .notifier_call = watchdog_notify_sys,
-};
-
-static int __init watchdog_init(int sioaddr)
+static int __init watchdog_init(struct watchdog_data *wd)
{
+ struct watchdog_device *wdd = &wd->wdd;
int wdt_conf, err = 0;
/* No need to lock watchdog.lock here because no entry points
* into the module have been registered yet.
*/
- watchdog.sioaddr = sioaddr;
- watchdog.ident.options = WDIOF_MAGICCLOSE
+ wd->ident.options = WDIOF_SETTIMEOUT
+ | WDIOF_MAGICCLOSE
| WDIOF_KEEPALIVEPING
| WDIOF_CARDRESET;
- snprintf(watchdog.ident.identity,
- sizeof(watchdog.ident.identity), "%s watchdog",
- watchdog.variant->wdt_name);
+ snprintf(wd->ident.identity, sizeof(wd->ident.identity),
+ "%s watchdog", wd->variant->wdt_name);
- err = superio_enter(sioaddr);
+ err = superio_enter(wd->sioaddr);
if (err)
return err;
- superio_select(watchdog.sioaddr, SIO_F71808FG_LD_WDT);
+ superio_select(wd->sioaddr, SIO_F71808FG_LD_WDT);
- wdt_conf = superio_inb(sioaddr, F71808FG_REG_WDT_CONF);
- watchdog.caused_reboot = wdt_conf & BIT(F71808FG_FLAG_WDTMOUT_STS);
+ wdt_conf = superio_inb(wd->sioaddr, F71808FG_REG_WDT_CONF);
/*
* We don't want WDTMOUT_STS to stick around till regular reboot.
* Write 1 to the bit to clear it to zero.
*/
- superio_outb(sioaddr, F71808FG_REG_WDT_CONF,
+ superio_outb(wd->sioaddr, F71808FG_REG_WDT_CONF,
wdt_conf | BIT(F71808FG_FLAG_WDTMOUT_STS));
- superio_exit(sioaddr);
+ if (watchdog_is_running(wd, wdt_conf))
+ set_bit(WDOG_HW_RUNNING, &wdd->status);
- err = watchdog_set_timeout(timeout);
- if (err)
- return err;
- err = watchdog_set_pulse_width(pulse_width);
- if (err)
- return err;
+ superio_exit(wd->sioaddr);
- err = register_reboot_notifier(&watchdog_notifier);
+ err = watchdog_set_pulse_width(wd, pulse_width);
if (err)
return err;
- err = misc_register(&watchdog_miscdev);
- if (err) {
- pr_err("cannot register miscdev on minor=%d\n",
- watchdog_miscdev.minor);
- goto exit_reboot;
- }
-
- if (start_withtimeout) {
- if (start_withtimeout <= 0
- || start_withtimeout > max_timeout) {
- pr_err("starting timeout out of range\n");
- err = -EINVAL;
- goto exit_miscdev;
- }
-
- err = watchdog_start();
- if (err) {
- pr_err("cannot start watchdog timer\n");
- goto exit_miscdev;
- }
-
- mutex_lock(&watchdog.lock);
- err = superio_enter(sioaddr);
- if (err)
- goto exit_unlock;
- superio_select(watchdog.sioaddr, SIO_F71808FG_LD_WDT);
-
- if (start_withtimeout > 0xff) {
- /* select minutes for timer units */
- superio_set_bit(sioaddr, F71808FG_REG_WDT_CONF,
- F71808FG_FLAG_WD_UNIT);
- superio_outb(sioaddr, F71808FG_REG_WD_TIME,
- DIV_ROUND_UP(start_withtimeout, 60));
- } else {
- /* select seconds for timer units */
- superio_clear_bit(sioaddr, F71808FG_REG_WDT_CONF,
- F71808FG_FLAG_WD_UNIT);
- superio_outb(sioaddr, F71808FG_REG_WD_TIME,
- start_withtimeout);
- }
-
- superio_exit(sioaddr);
- mutex_unlock(&watchdog.lock);
-
- if (nowayout)
- __module_get(THIS_MODULE);
+ wdd->info = &wd->ident;
+ wdd->ops = &f71808e_wdog_ops;
+ wdd->min_timeout = 1;
+ wdd->max_timeout = max_timeout;
+ wdd->timeout = timeout;
- pr_info("watchdog started with initial timeout of %u sec\n",
- start_withtimeout);
- }
+ watchdog_set_nowayout(wdd, nowayout);
+ watchdog_stop_on_unregister(wdd);
+ watchdog_stop_on_reboot(wdd);
+ watchdog_init_timeout(wdd, start_withtimeout, NULL);
+ watchdog_set_drvdata(wdd, wd);
- return 0;
+ if (wdt_conf & BIT(F71808FG_FLAG_WDTMOUT_STS))
+ wdd->bootstatus = WDIOF_CARDRESET;
-exit_unlock:
- mutex_unlock(&watchdog.lock);
-exit_miscdev:
- misc_deregister(&watchdog_miscdev);
-exit_reboot:
- unregister_reboot_notifier(&watchdog_notifier);
+ /*
+ * WATCHDOG_HANDLE_BOOT_ENABLED can result in keepalive being directly
+ * called without a set_timeout before, so it needs to be done here once
+ */
+ watchdog_set_timeout(wdd, wdd->timeout);
- return err;
+ return watchdog_register_device(wdd);
}
static void f71808fg_pinconf(struct watchdog_data *wd)
@@ -812,8 +536,11 @@ static struct f71808e_variant __init *f71808e_find(int sioaddr)
return variant;
}
+static struct watchdog_data watchdog;
+
static int __init f71808e_init(void)
{
+ struct watchdog_data *wd = &watchdog;
static const unsigned short addrs[] = { 0x2e, 0x4e };
struct f71808e_variant *variant;
int i;
@@ -831,19 +558,15 @@ static int __init f71808e_init(void)
if (i == ARRAY_SIZE(addrs))
return PTR_ERR(variant);
- watchdog.variant = variant;
+ wd->variant = variant;
+ wd->sioaddr = addrs[i];
- return watchdog_init(addrs[i]);
+ return watchdog_init(wd);
}
static void __exit f71808e_exit(void)
{
- if (watchdog_is_running()) {
- pr_warn("Watchdog timer still running, stopping it\n");
- watchdog_stop();
- }
- misc_deregister(&watchdog_miscdev);
- unregister_reboot_notifier(&watchdog_notifier);
+ watchdog_unregister_device(&watchdog.wdd);
}
MODULE_DESCRIPTION("F71808E Watchdog Driver");
--
2.27.0
Powered by blists - more mailing lists