Message-ID: <20200611125205.1e0280d3@jacob-builder>
Date:   Thu, 11 Jun 2020 12:52:05 -0700
From:   Jacob Pan <jacob.jun.pan@...ux.intel.com>
To:     Alex Williamson <alex.williamson@...hat.com>
Cc:     iommu@...ts.linux-foundation.org,
        LKML <linux-kernel@...r.kernel.org>,
        "Lu Baolu" <baolu.lu@...ux.intel.com>,
        Joerg Roedel <joro@...tes.org>,
        David Woodhouse <dwmw2@...radead.org>,
        Yi Liu <yi.l.liu@...el.com>,
        "Tian, Kevin" <kevin.tian@...el.com>,
        Raj Ashok <ashok.raj@...el.com>,
        "Christoph Hellwig" <hch@...radead.org>,
        Jean-Philippe Brucker <jean-philippe@...aro.com>,
        Eric Auger <eric.auger@...hat.com>,
        Jonathan Corbet <corbet@....net>, jacob.jun.pan@...ux.intel.com
Subject: Re: [PATCH v2 1/3] docs: IOMMU user API

Hi Alex,

On Thu, 11 Jun 2020 09:47:41 -0600
Alex Williamson <alex.williamson@...hat.com> wrote:

> On Wed, 10 Jun 2020 21:12:13 -0700
> Jacob Pan <jacob.jun.pan@...ux.intel.com> wrote:
> 
> > IOMMU UAPI is newly introduced to support communications between
> > guest virtual IOMMU and host IOMMU. There has been lots of
> > discussions on how it should work with VFIO UAPI and userspace in
> > general.
> > 
> > This document is indended to clarify the UAPI design and usage. The
> > mechenics of how future extensions should be achieved are also
> > covered in this documentation.
> > 
> > Signed-off-by: Liu Yi L <yi.l.liu@...el.com>
> > Signed-off-by: Jacob Pan <jacob.jun.pan@...ux.intel.com>
> > ---
> >  Documentation/userspace-api/iommu.rst | 210
> > ++++++++++++++++++++++++++++++++++ 1 file changed, 210 insertions(+)
> >  create mode 100644 Documentation/userspace-api/iommu.rst
> > 
> > diff --git a/Documentation/userspace-api/iommu.rst
> > b/Documentation/userspace-api/iommu.rst new file mode 100644
> > index 000000000000..e95dc5a04a41
> > --- /dev/null
> > +++ b/Documentation/userspace-api/iommu.rst
> > @@ -0,0 +1,210 @@
> > +.. SPDX-License-Identifier: GPL-2.0
> > +.. iommu:
> > +
> > +=====================================
> > +IOMMU Userspace API
> > +=====================================
> > +
> > +IOMMU UAPI is used for virtualization cases where communications
> > are +needed between physical and virtual IOMMU drivers. For native
> > +usage, IOMMU is a system device which does not need to communicate
> > +with user space directly.
> > +
> > +The primary use cases are guest Shared Virtual Address (SVA) and
> > +guest IO virtual address (IOVA), wherein virtual IOMMU (vIOMMU) is
> > +required to communicate with the physical IOMMU in the host.
> > +
> > +.. contents:: :local:
> > +
> > +Functionalities
> > +====================================================
> > +Communications of user and kernel involve both directions. The
> > +supported user-kernel APIs are as follows:
> > +
> > +1. Alloc/Free PASID
> > +2. Bind/unbind guest PASID (e.g. Intel VT-d)
> > +3. Bind/unbind guest PASID table (e.g. ARM sMMU)
> > +4. Invalidate IOMMU caches
> > +5. Service page request
> > +
> > +Requirements
> > +====================================================
> > +The IOMMU UAPIs are generic and extensible to meet the following
> > +requirements:
> > +
> > +1. Emulated and para-virtualised vIOMMUs
> > +2. Multiple vendors (Intel VT-d, ARM sMMU, etc.)
> > +3. Extensions to the UAPI shall not break existing user space
> > +
> > +Interfaces
> > +====================================================
> > +Although the data structures defined in IOMMU UAPI are
> > self-contained, +there is no user API functions introduced.
> > Instead, IOMMU UAPI is +designed to work with existing user driver
> > frameworks such as VFIO. +
> > +Extension Rules & Precautions
> > +-----------------------------
> > +When IOMMU UAPI gets extended, the data structures can *only* be
> > +modified in two ways:
> > +
> > +1. Adding new fields by re-purposing the padding[] field. No size
> > change. +2. Adding new union members at the end. May increase in
> > size. +
> > +No new fields can be added *after* the variable size union in that
> > it +will break backward compatibility when offset moves. In both
> > cases, a +new flag must be accompanied with a new field such that
> > the IOMMU +driver can process the data based on the new flag.
> > Version field is +only reserved for the unlikely event of UAPI
> > upgrade at its entirety. +
> > +It's *always* the caller's responsibility to indicate the size of
> > the +structure passed by setting argsz appropriately.
> > +
> > +When IOMMU UAPI extension results in size increase, user such as
> > VFIO +has to handle the following scenarios:
> > +
> > +1. User and kernel has exact size match
> > +2. An older user with older kernel header (smaller UAPI size)
> > running on a
> > +   newer kernel (larger UAPI size)
> > +3. A newer user with newer kernel header (larger UAPI size) running
> > +   on a older kernel.
> > +4. A malicious/misbehaving user pass illegal/invalid size but
> > within
> > +   range. The data may contain garbage.
> > +
> > +
> > +Feature Checking
> > +----------------
> > +While launching a guest with vIOMMU, it is important to ensure
> > that host +can support the UAPI data structures to be used for
> > vIOMMU-pIOMMU +communications. Without the upfront compatibility
> > checking, future +faults are difficult to report even in normal
> > conditions. For example, +TLB invalidations should always succeed
> > from vIOMMU's +perspective. There is no architectural way to report
> > back to the vIOMMU +if the UAPI data is incompatible. For this
> > reason the following IOMMU +UAPIs cannot fail:
> > +
> > +1. Free PASID
> > +2. Unbind guest PASID
> > +3. Unbind guest PASID table (SMMU)
> > +4. Cache invalidate
> > +5. Page response
> > +
> > +User applications such as QEMU is expected to import kernel UAPI
> > +headers. Only backward compatibility is supported. For example, an
> > +older QEMU (with older kernel header) can run on newer kernel.
> > Newer +QEMU (with new kernel header) may fail on older kernel.  
> 
> "Build your user application against newer kernels and it may break on
> older kernels" is not a great selling point of this UAPI.  Clearly new
> features may not be available on older kernels and an application that
> depends on a newer feature may be restricted to newer kernels.
> 
Perhaps "fail on older kernel" is not the right statement. I meant to
say "Newer QEMU (with new kernel header) may fail the compatibility
check on older kernel". Here compatibility check involves argsz check
and feature check.

Does it sound right?

> > +
> > +IOMMU vendor driver should report the below features to IOMMU UAPI
> > +consumers (e.g. via VFIO).
> > +
> > +1. IOMMU_NESTING_FEAT_SYSWIDE_PASID
> > +2. IOMMU_NESTING_FEAT_BIND_PGTBL
> > +3. IOMMU_NESTING_FEAT_BIND_PASID_TABLE
> > +4. IOMMU_NESTING_FEAT_CACHE_INVLD
> > +5. IOMMU_NESTING_FEAT_PAGE_REQUEST
> > +
> > +Take VFIO as example, upon request from VFIO user space (e.g.
> > QEMU), +VFIO kernel code shall query IOMMU vendor driver for the
> > support of +the above features. Query result can then be reported
> > back to the +user-space caller. Details can be found in
> > +Documentation/driver-api/vfio.rst.
> > +
> > +
> > +Data Passing Example with VFIO
> > +------------------------------
> > +As the ubiquitous userspace driver framework, VFIO is already IOMMU
> > +aware and share many key concepts such as device model, group, and
> > +protection domain. Other user driver frameworks can also be
> > extended +to support IOMMU UAPI but it is outside the scope of this
> > document. +
> > +In this tight-knit VFIO-IOMMU interface, the ultimate consumer of
> > the +IOMMU UAPI data is the host IOMMU driver. VFIO facilitates
> > user-kernel +transport, capability checking, security, and life
> > cycle management of +process address space ID (PASID).
> > +
> > +Unlike normal user data passed via VFIO UAPI IOTCL, IOMMU driver
> > is the +ultimate consumer of its UAPI data. At VFIO layer, the
> > IOMMU UAPI data +is wrapped in a VFIO UAPI data for sanity
> > checking. It follows the +pattern below:
> > +
> > +::
> > +
> > +   struct {
> > +	__u32 argsz;
> > +	__u32 flags;
> > +	__u8  data[];
> > +  }
> > +
> > +Here data[] contains the IOMMU UAPI data structures.
> > +
> > +In order to determine the size and feature set of the user data,
> > argsz +and flags are also embedded in the IOMMU UAPI data
> > structures. +A "__u32 argsz" field is *always* at the beginning of
> > each structure. +
> > +For example:
> > +::
> > +
> > +   struct iommu_gpasid_bind_data {
> > +	__u32 argsz;
> > +	__u32 version;
> > +	#define IOMMU_PASID_FORMAT_INTEL_VTD	1
> > +	__u32 format;
> > +	#define IOMMU_SVA_GPASID_VAL	(1 << 0)
> > +	__u64 flags;
> > +	__u64 gpgd;
> > +	__u64 hpasid;
> > +	__u64 gpasid;
> > +	__u32 addr_width;
> > +	__u8  padding[12];
> > +	/* Vendor specific data */
> > +	union {
> > +		struct iommu_gpasid_bind_data_vtd vtd;
> > +	};
> > +  };
> > +
> > +Use bind guest PASID as an example, VFIO code shall process IOMMU
> > UAPI +request as follows:
> > +
> > +::
> > +
> > + 1        /* Minsz must include IOMMU UAPI "argsz" of __u32 */
> > + 2        minsz = offsetofend(struct vfio_iommu_type1_bind, flags)
> > +
> > +                              sizeof(u32);  
> 
> In the example structure above:
> 
> > +   struct {
> > +	__u32 argsz;
> > +	__u32 flags;
> > +	__u8  data[];
> > +  }  
> 
> This presumes that vfio does not use flags to identify a different
> layout, for example a field before data or defining a flag that
> provides no data.  IOW, the IOMMU guarantees argsz at the beginning of
> all structures, but let's not limit how vfio chooses to bundle that
> structure.  minsz should be based on flags, which we'll evaluate to
> determine how much more to copy.
> 
Got it, VFIO owns its flags therefore minsz. How about reword the
example data struct as:
   struct {
	__u32 argsz;
	__u32 flags;
	__u8  data[];
  }

Here data[] contains the IOMMU UAPI data structures. VFIO has the
freedom to bundle the data as well as parse data size based on its own flags.

In the example code:

"Use bind guest PASID as an example, VFIO code shall first
process the flags field to determine the size to copy for IOMMU UAPI.
The flags could indicate different layout of the VFIO data and the types
of IOMMU UAPI data."


> > UAPI +request as follows:

> > + 3        copy_from_user(&vfio_bind, (void __user *)arg, minsz);
> > + 4
> > + 5        /* Check VFIO argsz */
> > + 6        if (vfio_bind.argsz < minsz)
> > + 7                return -EINVAL;
> > + 8
> > + 9        /* VFIO flags must be included in minsz */
> > + 10        switch (vfio_bind.flags) {
> > + 11        case VFIO_IOMMU_BIND_GUEST_PGTBL:
> > + 12                /*
> > + 13                 * Get the current IOMMU bind GPASID data size,
> > + 14                 * which accounted for the largest union member.
> > + 15                 */
> > + 16                data_size = sizeof(struct
> > iommu_gpasid_bind_data);
> > + 17                iommu_argsz = vfio_bind.argsz - minsz;  
> 
> Note that by including the IOMMU UAPI argsz within minsz, this is
> incorrect.
> 
Good catch, should be:
iommu_argsz = vfio_bind.argsz - minsz - sizeof(u32)

> > + 18                if (iommu_argsz > data_size) {
> > + 19                        /* User data > current kernel */
> > + 20                        return -E2BIG;
> > + 21                }  
> 
> Now I see why you're making the claim that QEMU compiled against an
> new kernel may not work on an older kernel.  We can do better.  The
> current sizeof the data structure should be the maximum we'll copy
> from the user, and we can update the user provided IOMMU UAPI argsz
> as we pass it down from the user to avoid exposing ourselves to an
> arbitrarily large user buffer.  The IOMMU UAPI interfaces should then
> also use argsz and flags to determine whether the data is present for
> a specified flag. That should allow a user application compiled
> against a newer kernel header, but only using features found on older
> kernels to continue to work on older kernels, which seems like a
> basic requirement to me.
> 
I got your point. But I don't understand why VFIO layer will update
IOMMU argsz, IOMMU layer is not exposed to arbitrary large user size in
that it can not exceed the current UAPI data size.

I agree we should make effort to allow features found in the older
kernel continue to work.


> > + 22                copy_from_user(&iommu_bind, (void __user *)
> > + 23                               vfio_bind.data, iommu_argsz);
> > + 24               /*
> > + 25                * Deal with trailing bytes that is bigger than
> > user
> > + 26                * provided UAPI size but smaller than the
> > current
> > + 27                * kernel data size. Zero fill the trailing
> > bytes.
> > + 28                */
> > + 29                memset(iommu_bind + iommu_argsz, 0, data_size -
> > + 30                       iommu_argsz;  
> 
> The IOMMU UAPI interface having access to argsz should make this
> unnecessary.  Performing this memset() seems like it suggests to the
> next layer that it can rely on all fields being present and valid,
> which defeats the purpose of argsz.
> 
This memset does not suggest all fields are present and valid. Only
filter out the obvious invalid data based on current size. My intention
is to reduce the burden of checking not eliminate.

> > + 31
> > + 32                iommu_sva_bind_gpasid(domain, dev,
> > iommu_bind_data);
> > + 33                break;
> > +
> > +
> > +Case #1 & 2 are supported per backward compatibility rule.
> > +
> > +Case #3 will fail with -E2BIG at line #20. Case  
> 
> This is not acceptable IMO.
> 
Got it. Will copy up to the current data size and let IOMMU driver
handle supported flags/features.

> > +Case #4 may result in other error processed by IOMMU vendor
> > driver. However, +the damage shall not exceed the scope of the
> > offending user.  
> 
> This is a concern in this double wrapped interface, the IOMMU UAPI
> layer may expect the vfio layer to validate the data.  Zeroing the
> remainder of the data structure is evidence towards that.  The IOMMU
> UAPI layer needs to consider all of this untrusted, so why would we
> not reflect that by passing a __user pointer through to the IOMMU
> UAPI such that it can copy the data from the user itself rather than
> being mislead that the contents have been somehow verified?  Thanks,
> 
I am OK with IOMMU layer does the copy_from_user. One of my
original thinking was that since some APIs (e.g page response) also
used by in-kernel code, I would avoid user pointer or another
wrapper.

Perhaps need to clarify the roles of each layer, IMHO the roles are:
- VFIO
	1. bundle IOMMU UAPI data with flags & argsz
	2. sanity check argsz > minsz
	3. determine the copy_from_user size based on VFIO flags & argsz

- IOMMU UAPI
	1. check argsz against current kernel IOMMU UAPI data size, its
	own minsz
	2. parse data based on feature/flags

So if VFIO already can decide the copy_from_user size as in VFIO.3, why
can't it just do the copy as well. VFIO only checks and ensures size,
nothing specific to the content of IOMMU UAPI. Does the role partition
sound right?


> Alex
> 

[Jacob Pan]

Powered by blists - more mailing lists