linux-kernel - [PATCH v3 0/3] ASoC: ti: Add support for audio on J721e EVM

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <20200612085909.15018-1-peter.ujfalusi@ti.com>
Date:   Fri, 12 Jun 2020 11:59:06 +0300
From:   Peter Ujfalusi <peter.ujfalusi@...com>
To:     <broonie@...nel.org>, <lgirdwood@...il.com>, <robh+dt@...nel.org>
CC:     <alsa-devel@...a-project.org>, <devicetree@...r.kernel.org>,
        <linux-kernel@...r.kernel.org>
Subject: [PATCH v3 0/3] ASoC: ti: Add support for audio on J721e EVM

Hi,

Changes since v2:
- DT binding:
 - use proper (?) patch subject for the binding docuemtn patch
 - drop pll4 and pll15 from DT - driver should check the rate via
   clk_get_parent. If it is not available (as it is not currently) then use the
   match_data provided rates.
 - add simple explanation for the clocking setup
 - Use descriptive names for clocks: cpb/ivi-mcasp-auxclk and cpb/ivi-codec-scki
 - dt_binding_check shows no errors/warnings
- ASoC machine driver:
 - Try to read the PLL4/15 rate with clk API (parent of the two clock divider)
   if it is not available then use the match_data provided numbers.
 - Support for single PLL setup

Changes since v1:
- Fixed DT binding documentation errors
- Rebased on ASoC head and updated the driver to compile and work

This series adds support for the analog audio setup on the j721e EVM.
The audio setup of the EVM is:
Common Processor Board (CPB): McASP10 <-> pcm3168a
Infotainment Expansion Board (IVI): McASP0 <-> 2x pcm3168a

Both CPB and IVI wired in parallel serializer setup.

The first patch adds the stream_name for McASP driver as it is needed in
multicodec (and would be needed in DPCM) setup for proper DAPM handling.

The second patch adds two DT schema, one for the cpb and one for the cpb+ivi
card.

Regards,
Peter
---
Peter Ujfalusi (3):
  ASoC: ti: davinci-mcasp: Specify stream_name for playback/capture
  ASoC: dt-bindings: Add documentation for TI j721e EVM (CPB and IVI)
  ASoC: ti: Add custom machine driver for j721e EVM (CPB and IVI)

 .../bindings/sound/ti,j721e-cpb-audio.yaml    |  95 ++
 .../sound/ti,j721e-cpb-ivi-audio.yaml         | 150 +++
 sound/soc/ti/Kconfig                          |   8 +
 sound/soc/ti/Makefile                         |   2 +
 sound/soc/ti/davinci-mcasp.c                  |   3 +
 sound/soc/ti/j721e-evm.c                      | 887 ++++++++++++++++++
 6 files changed, 1145 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml
 create mode 100644 Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.yaml
 create mode 100644 sound/soc/ti/j721e-evm.c

-- 
Peter

Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki