| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1592057910.25636.81.camel@mtkswgap22>
Date: Sat, 13 Jun 2020 22:18:30 +0800
From: Stanley Chu <stanley.chu@...iatek.com>
To: Avri Altman <Avri.Altman@....com>
CC: "linux-scsi@...r.kernel.org" <linux-scsi@...r.kernel.org>,
"martin.petersen@...cle.com" <martin.petersen@...cle.com>,
"alim.akhtar@...sung.com" <alim.akhtar@...sung.com>,
"jejb@...ux.ibm.com" <jejb@...ux.ibm.com>,
"asutoshd@...eaurora.org" <asutoshd@...eaurora.org>,
"beanhuo@...ron.com" <beanhuo@...ron.com>,
"cang@...eaurora.org" <cang@...eaurora.org>,
"matthias.bgg@...il.com" <matthias.bgg@...il.com>,
"bvanassche@....org" <bvanassche@....org>,
"linux-mediatek@...ts.infradead.org"
<linux-mediatek@...ts.infradead.org>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"kuohong.wang@...iatek.com" <kuohong.wang@...iatek.com>,
"peter.wang@...iatek.com" <peter.wang@...iatek.com>,
"chun-hung.wu@...iatek.com" <chun-hung.wu@...iatek.com>,
"andy.teng@...iatek.com" <andy.teng@...iatek.com>,
"chaotian.jing@...iatek.com" <chaotian.jing@...iatek.com>,
"cc.chou@...iatek.com" <cc.chou@...iatek.com>
Subject: RE: [PATCH v1 2/2] scsi: ufs: Add trace event for UIC commands
Hi Avri,
On Sat, 2020-06-13 at 10:48 +0000, Avri Altman wrote:
> > +static void ufshcd_add_uic_command_trace(struct ufs_hba *hba,
> > + struct uic_command *ucmd,
> > + const char *str)
> > +{
> > + u32 cmd;
> > +
> > + if (!trace_ufshcd_uic_command_enabled())
> > + return;
> > +
> > + if (!strcmp(str, "uic_send"))
> > + cmd = ucmd->command;
> > + else
> > + cmd = ufshcd_readl(hba, REG_UIC_COMMAND);
> Why on complete you can't just use ucmd->command as well?
Reading registers is really helpful for debugging to check if host UIC
command register really received the command before.
But the original requesting UIC command shall be logged in trace so
ucmd->command is logged during "send", and the command in register is
read and logged during "completed". Then we could simply check them to
know if something wrong while sending the command.
This concept is similar as current UTP command trace events that
doorbell register is read and dumped in the trace.
>
> > +
> > + trace_ufshcd_uic_command(dev_name(hba->dev), str, cmd,
> > + ucmd->result,
> > + ufshcd_readl(hba, REG_UIC_COMMAND_ARG_1),
> > + ufshcd_readl(hba, REG_UIC_COMMAND_ARG_2),
> > + ufshcd_readl(hba, REG_UIC_COMMAND_ARG_3));
> Why can't you just use the ucmd members?
> Why need to read those?
As above same reason, reading registers can know which arguments are
exactly sent to the device.
This is very helpful for fast issue breakdown if UIC command is not
responded under expectation.
Here, we also really want to keep the original requesting arguments from
"ucmd", just like UIC command. However, arguments in register will be
changed after UIC command is done so we can not do the same way as UIC
command. So a compromise is here that we logged the arguments which host
register exactly received in trace.
>
> > +}
>
>
> > +
> > static void ufshcd_add_command_trace(struct ufs_hba *hba,
> > unsigned int tag, const char *str)
> > {
> > @@ -2054,6 +2075,8 @@ ufshcd_dispatch_uic_cmd(struct ufs_hba *hba,
> > struct uic_command *uic_cmd)
> > /* Write UIC Cmd */
> > ufshcd_writel(hba, uic_cmd->command & COMMAND_OPCODE_MASK,
> > REG_UIC_COMMAND);
> > +
> > + ufshcd_add_uic_command_trace(hba, uic_cmd, "uic_send");
> > }
> >
> > /**
> > @@ -2080,6 +2103,9 @@ ufshcd_wait_for_uic_cmd(struct ufs_hba *hba,
> > struct uic_command *uic_cmd)
> > hba->active_uic_cmd = NULL;
> > spin_unlock_irqrestore(hba->host->host_lock, flags);
> >
> > + uic_cmd->result = ret;
> > + ufshcd_add_uic_command_trace(hba, uic_cmd, "uic_complete");
> > +
> > return ret;
> > }
> Can't you just call the "send" and "complete" from ufshcd_send_uic_cmd?
For "send", we would like to log the time as precise as possible so
"send" event is logged while UIC command is sent.
Thanks so much! Your question reminds me that "send" trace shall be
moved before UIC command is sent otherwise register value may be changed
before logging "send" trace. I will fix this in next version.
For "completed", to make logging time as closed to UIC command
completion as possible, maybe I need to change the logging timing to
ufshcd_uic_cmd_compl(), just like UTP command completion trace which is
logged in __ufshcd_transfer_reg_compl().
If you have no objection, I will try to fix this in next version.
>
>
> >
> > @@ -3760,6 +3786,9 @@ static int ufshcd_uic_pwr_ctrl(struct ufs_hba *hba,
> > struct uic_command *cmd)
> > ret = (status != PWR_OK) ? status : -1;
> > }
> > out:
> > + cmd->result = ret;
> > + ufshcd_add_uic_command_trace(hba, cmd, "uic_complete");
> > +
> > if (ret) {
> > ufshcd_print_host_state(hba);
> > ufshcd_print_pwr_info(hba);
> > diff --git a/include/trace/events/ufs.h b/include/trace/events/ufs.h
> > index 5f300739240d..cf8d568d5a13 100644
> > --- a/include/trace/events/ufs.h
> > +++ b/include/trace/events/ufs.h
> > @@ -249,6 +249,39 @@ TRACE_EVENT(ufshcd_command,
> > )
> > );
> >
> > +TRACE_EVENT(ufshcd_uic_command,
> > + TP_PROTO(const char *dev_name, const char *str, u32 cmd, int result,
> > + u32 arg1, u32 arg2, u32 arg3),
> > +
> > + TP_ARGS(dev_name, str, cmd, result, arg1, arg2, arg3),
> > +
> > + TP_STRUCT__entry(
> > + __string(dev_name, dev_name)
> > + __string(str, str)
> > + __field(u32, cmd)
> > + __field(int, result)
> > + __field(u32, arg1)
> > + __field(u32, arg2)
> > + __field(u32, arg3)
> > + ),
> > +
> > + TP_fast_assign(
> > + __assign_str(dev_name, dev_name);
> > + __assign_str(str, str);
> > + __entry->cmd = cmd;
> > + __entry->result = result;
> > + __entry->arg1 = arg1;
> > + __entry->arg2 = arg2;
> > + __entry->arg3 = arg3;
> > + ),
> > +
> > + TP_printk(
> > + "%s: %s: cmd: 0x%x, arg1: 0x%x, arg2: 0x%x, arg3: 0x%x, result: %d",
> > + __get_str(str), __get_str(dev_name), __entry->cmd,
> > + __entry->arg1, __entry->arg2, __entry->arg3, __entry->result
> > + )
> Personally, as those trace events aren't very human readable anyway, I would just dump the uic command,
> And let the parsers do their job.
> And if this is the case, result is redundant as it is part of arg2
My original thought is to log some exceptions, like "-ETIMEDOUT" in
"result". But if I changed "completion" trace handling to interrupt
handler, there will be no chance to log those exceptions. This is OK
because UTP trace is exactly behave this way: No completion event in
trace if request is not back. And if this way is implemented, "result"
is definitely redundant and shall be removed.
Thanks,
Stanley Chu
Powered by blists - more mailing lists