linux-kernel - [PATCH v1] regualtor: pfuze100: correct sw1a/sw2 on pfuze3000

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <1592171648-8752-1-git-send-email-yibin.gong@nxp.com>
Date:   Mon, 15 Jun 2020 05:54:08 +0800
From:   Robin Gong <yibin.gong@....com>
To:     lgirdwood@...il.com, broonie@...nel.org, Anson.Huang@....com,
        Christophe.Meynard@....fr
Cc:     linux-imx@....com, linux-kernel@...r.kernel.org
Subject: [PATCH v1] regualtor: pfuze100: correct sw1a/sw2 on pfuze3000

PFUZE100_SWB_REG is not proper for sw1a/sw2, because enable_mask/enable_reg
is not correct. On PFUZE3000, sw1a/sw2 should be the same as sw1a/sw2 on
pfuze100 except that voltages are not linear, so add new PFUZE3000_SW_REG
and pfuze3000_sw_regulator_ops which like the non-linear PFUZE100_SW_REG
and pfuze100_sw_regulator_ops.

Fixes: 1dced996ee70 ("regulator: pfuze100: update voltage setting for pfuze3000 sw1a")
Signed-off-by: Robin Gong <yibin.gong@....com>
Reported-by: Christophe Meynard <Christophe.Meynard@....fr>

---
 drivers/regulator/pfuze100-regulator.c | 60 ++++++++++++++++++++++------------
 1 file changed, 39 insertions(+), 21 deletions(-)

diff --git a/drivers/regulator/pfuze100-regulator.c b/drivers/regulator/pfuze100-regulator.c
index c34588d..0398b57 100644
--- a/drivers/regulator/pfuze100-regulator.c
+++ b/drivers/regulator/pfuze100-regulator.c
@@ -220,6 +220,19 @@ static const struct regulator_ops pfuze100_swb_regulator_ops = {
 
 };
 
+static const struct regulator_ops pfuze3000_sw_regulator_ops = {
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+	.list_voltage = regulator_list_voltage_table,
+	.map_voltage = regulator_map_voltage_ascend,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+	.set_voltage_time_sel = regulator_set_voltage_time_sel,
+	.set_ramp_delay = pfuze100_set_ramp_delay,
+
+};
+
 #define PFUZE100_FIXED_REG(_chip, _name, base, voltage)	\
 	[_chip ## _ ## _name] = {	\
 		.desc = {	\
@@ -329,23 +342,28 @@ static const struct regulator_ops pfuze100_swb_regulator_ops = {
 	.stby_mask = 0x20,	\
 }
 
-
-#define PFUZE3000_SW2_REG(_chip, _name, base, min, max, step)	{	\
-	.desc = {	\
-		.name = #_name,\
-		.n_voltages = ((max) - (min)) / (step) + 1,	\
-		.ops = &pfuze100_sw_regulator_ops,	\
-		.type = REGULATOR_VOLTAGE,	\
-		.id = _chip ## _ ## _name,	\
-		.owner = THIS_MODULE,	\
-		.min_uV = (min),	\
-		.uV_step = (step),	\
-		.vsel_reg = (base) + PFUZE100_VOL_OFFSET,	\
-		.vsel_mask = 0x7,	\
-	},	\
-	.stby_reg = (base) + PFUZE100_STANDBY_OFFSET,	\
-	.stby_mask = 0x7,	\
-}
+/* No linar case for the some switches of PFUZE3000 */
+#define PFUZE3000_SW_REG(_chip, _name, base, mask, voltages)	\
+	[_chip ## _ ##  _name] = {	\
+		.desc = {	\
+			.name = #_name,	\
+			.n_voltages = ARRAY_SIZE(voltages),	\
+			.ops = &pfuze3000_sw_regulator_ops,	\
+			.type = REGULATOR_VOLTAGE,	\
+			.id = _chip ## _ ## _name,	\
+			.owner = THIS_MODULE,	\
+			.volt_table = voltages,	\
+			.vsel_reg = (base) + PFUZE100_VOL_OFFSET,	\
+			.vsel_mask = (mask),	\
+			.enable_reg = (base) + PFUZE100_MODE_OFFSET,	\
+			.enable_mask = 0xf,	\
+			.enable_val = 0x8,	\
+			.enable_time = 500,	\
+		},	\
+		.stby_reg = (base) + PFUZE100_STANDBY_OFFSET,	\
+		.stby_mask = (mask),	\
+		.sw_reg = true,		\
+	}
 
 #define PFUZE3000_SW3_REG(_chip, _name, base, min, max, step)	{	\
 	.desc = {	\
@@ -402,9 +420,9 @@ static struct pfuze_regulator pfuze200_regulators[] = {
 };
 
 static struct pfuze_regulator pfuze3000_regulators[] = {
-	PFUZE100_SWB_REG(PFUZE3000, SW1A, PFUZE100_SW1ABVOL, 0x1f, pfuze3000_sw1a),
+	PFUZE3000_SW_REG(PFUZE3000, SW1A, PFUZE100_SW1ABVOL, 0x1f, pfuze3000_sw1a),
 	PFUZE100_SW_REG(PFUZE3000, SW1B, PFUZE100_SW1CVOL, 700000, 1475000, 25000),
-	PFUZE100_SWB_REG(PFUZE3000, SW2, PFUZE100_SW2VOL, 0x7, pfuze3000_sw2lo),
+	PFUZE3000_SW_REG(PFUZE3000, SW2, PFUZE100_SW2VOL, 0x7, pfuze3000_sw2lo),
 	PFUZE3000_SW3_REG(PFUZE3000, SW3, PFUZE100_SW3AVOL, 900000, 1650000, 50000),
 	PFUZE100_SWB_REG(PFUZE3000, SWBST, PFUZE100_SWBSTCON1, 0x3, pfuze100_swbst),
 	PFUZE100_SWB_REG(PFUZE3000, VSNVS, PFUZE100_VSNVSVOL, 0x7, pfuze100_vsnvs),
@@ -418,8 +436,8 @@ static struct pfuze_regulator pfuze3000_regulators[] = {
 };
 
 static struct pfuze_regulator pfuze3001_regulators[] = {
-	PFUZE100_SWB_REG(PFUZE3001, SW1, PFUZE100_SW1ABVOL, 0x1f, pfuze3000_sw1a),
-	PFUZE100_SWB_REG(PFUZE3001, SW2, PFUZE100_SW2VOL, 0x7, pfuze3000_sw2lo),
+	PFUZE3000_SW_REG(PFUZE3001, SW1, PFUZE100_SW1ABVOL, 0x1f, pfuze3000_sw1a),
+	PFUZE3000_SW_REG(PFUZE3001, SW2, PFUZE100_SW2VOL, 0x7, pfuze3000_sw2lo),
 	PFUZE3000_SW3_REG(PFUZE3001, SW3, PFUZE100_SW3AVOL, 900000, 1650000, 50000),
 	PFUZE100_SWB_REG(PFUZE3001, VSNVS, PFUZE100_VSNVSVOL, 0x7, pfuze100_vsnvs),
 	PFUZE100_VGEN_REG(PFUZE3001, VLDO1, PFUZE100_VGEN1VOL, 1800000, 3300000, 100000),
-- 
2.7.4