| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20200615201522.19677-7-dmurphy@ti.com>
Date: Mon, 15 Jun 2020 15:15:13 -0500
From: Dan Murphy <dmurphy@...com>
To: <jacek.anaszewski@...il.com>, <pavel@....cz>, <robh@...nel.org>
CC: <devicetree@...r.kernel.org>, <linux-leds@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, Dan Murphy <dmurphy@...com>
Subject: [RESEND PATCH v27 06/15] dt-bindings: leds: Convert leds-lp55xx to yaml
Convert the leds-lp55xx.txt to yaml binding.
Signed-off-by: Dan Murphy <dmurphy@...com>
---
.../devicetree/bindings/leds/leds-lp55xx.txt | 228 ------------------
.../devicetree/bindings/leds/leds-lp55xx.yaml | 218 +++++++++++++++++
2 files changed, 218 insertions(+), 228 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/leds/leds-lp55xx.txt
create mode 100644 Documentation/devicetree/bindings/leds/leds-lp55xx.yaml
diff --git a/Documentation/devicetree/bindings/leds/leds-lp55xx.txt b/Documentation/devicetree/bindings/leds/leds-lp55xx.txt
deleted file mode 100644
index 1b66a413fb9d..000000000000
--- a/Documentation/devicetree/bindings/leds/leds-lp55xx.txt
+++ /dev/null
@@ -1,228 +0,0 @@
-Binding for TI/National Semiconductor LP55xx Led Drivers
-
-Required properties:
-- compatible: one of
- national,lp5521
- national,lp5523
- ti,lp55231
- ti,lp5562
- ti,lp8501
-
-- reg: I2C slave address
-- clock-mode: Input clock mode, (0: automode, 1: internal, 2: external)
-
-Each child has own specific current settings
-- led-cur: Current setting at each led channel (mA x10, 0 if led is not connected)
-- max-cur: Maximun current at each led channel.
-
-Optional properties:
-- enable-gpio: GPIO attached to the chip's enable pin
-- label: Used for naming LEDs
-- pwr-sel: LP8501 specific property. Power selection for output channels.
- 0: D1~9 are connected to VDD
- 1: D1~6 with VDD, D7~9 with VOUT
- 2: D1~6 with VOUT, D7~9 with VDD
- 3: D1~9 are connected to VOUT
-
-Alternatively, each child can have a specific channel name and trigger:
-- chan-name (optional): name of channel
-- linux,default-trigger (optional): see
- Documentation/devicetree/bindings/leds/common.txt
-
-example 1) LP5521
-3 LED channels, external clock used. Channel names are 'lp5521_pri:channel0',
-'lp5521_pri:channel1' and 'lp5521_pri:channel2', with a heartbeat trigger
-on channel 0.
-
-lp5521@32 {
- compatible = "national,lp5521";
- reg = <0x32>;
- label = "lp5521_pri";
- clock-mode = /bits/ 8 <2>;
-
- chan0 {
- led-cur = /bits/ 8 <0x2f>;
- max-cur = /bits/ 8 <0x5f>;
- linux,default-trigger = "heartbeat";
- };
-
- chan1 {
- led-cur = /bits/ 8 <0x2f>;
- max-cur = /bits/ 8 <0x5f>;
- };
-
- chan2 {
- led-cur = /bits/ 8 <0x2f>;
- max-cur = /bits/ 8 <0x5f>;
- };
-};
-
-example 2) LP5523
-9 LED channels with specific name. Internal clock used.
-The I2C slave address is configurable with ASEL1 and ASEL0 pins.
-Available addresses are 32/33/34/35h.
-
-ASEL1 ASEL0 Address
--------------------------
- GND GND 32h
- GND VEN 33h
- VEN GND 34h
- VEN VEN 35h
-
-lp5523@32 {
- compatible = "national,lp5523";
- reg = <0x32>;
- clock-mode = /bits/ 8 <1>;
-
- chan0 {
- chan-name = "d1";
- led-cur = /bits/ 8 <0x14>;
- max-cur = /bits/ 8 <0x20>;
- };
-
- chan1 {
- chan-name = "d2";
- led-cur = /bits/ 8 <0x14>;
- max-cur = /bits/ 8 <0x20>;
- };
-
- chan2 {
- chan-name = "d3";
- led-cur = /bits/ 8 <0x14>;
- max-cur = /bits/ 8 <0x20>;
- };
-
- chan3 {
- chan-name = "d4";
- led-cur = /bits/ 8 <0x14>;
- max-cur = /bits/ 8 <0x20>;
- };
-
- chan4 {
- chan-name = "d5";
- led-cur = /bits/ 8 <0x14>;
- max-cur = /bits/ 8 <0x20>;
- };
-
- chan5 {
- chan-name = "d6";
- led-cur = /bits/ 8 <0x14>;
- max-cur = /bits/ 8 <0x20>;
- };
-
- chan6 {
- chan-name = "d7";
- led-cur = /bits/ 8 <0x14>;
- max-cur = /bits/ 8 <0x20>;
- };
-
- chan7 {
- chan-name = "d8";
- led-cur = /bits/ 8 <0x14>;
- max-cur = /bits/ 8 <0x20>;
- };
-
- chan8 {
- chan-name = "d9";
- led-cur = /bits/ 8 <0x14>;
- max-cur = /bits/ 8 <0x20>;
- };
-};
-
-example 3) LP5562
-4 channels are defined.
-
-lp5562@30 {
- compatible = "ti,lp5562";
- reg = <0x30>;
- clock-mode = /bits/8 <2>;
-
- chan0 {
- chan-name = "R";
- led-cur = /bits/ 8 <0x20>;
- max-cur = /bits/ 8 <0x60>;
- };
-
- chan1 {
- chan-name = "G";
- led-cur = /bits/ 8 <0x20>;
- max-cur = /bits/ 8 <0x60>;
- };
-
- chan2 {
- chan-name = "B";
- led-cur = /bits/ 8 <0x20>;
- max-cur = /bits/ 8 <0x60>;
- };
-
- chan3 {
- chan-name = "W";
- led-cur = /bits/ 8 <0x20>;
- max-cur = /bits/ 8 <0x60>;
- };
-};
-
-example 4) LP8501
-9 channels are defined. The 'pwr-sel' is LP8501 specific property.
-Others are same as LP5523.
-
-lp8501@32 {
- compatible = "ti,lp8501";
- reg = <0x32>;
- clock-mode = /bits/ 8 <2>;
- pwr-sel = /bits/ 8 <3>; /* D1~9 connected to VOUT */
-
- chan0 {
- chan-name = "d1";
- led-cur = /bits/ 8 <0x14>;
- max-cur = /bits/ 8 <0x20>;
- };
-
- chan1 {
- chan-name = "d2";
- led-cur = /bits/ 8 <0x14>;
- max-cur = /bits/ 8 <0x20>;
- };
-
- chan2 {
- chan-name = "d3";
- led-cur = /bits/ 8 <0x14>;
- max-cur = /bits/ 8 <0x20>;
- };
-
- chan3 {
- chan-name = "d4";
- led-cur = /bits/ 8 <0x14>;
- max-cur = /bits/ 8 <0x20>;
- };
-
- chan4 {
- chan-name = "d5";
- led-cur = /bits/ 8 <0x14>;
- max-cur = /bits/ 8 <0x20>;
- };
-
- chan5 {
- chan-name = "d6";
- led-cur = /bits/ 8 <0x14>;
- max-cur = /bits/ 8 <0x20>;
- };
-
- chan6 {
- chan-name = "d7";
- led-cur = /bits/ 8 <0x14>;
- max-cur = /bits/ 8 <0x20>;
- };
-
- chan7 {
- chan-name = "d8";
- led-cur = /bits/ 8 <0x14>;
- max-cur = /bits/ 8 <0x20>;
- };
-
- chan8 {
- chan-name = "d9";
- led-cur = /bits/ 8 <0x14>;
- max-cur = /bits/ 8 <0x20>;
- };
-};
diff --git a/Documentation/devicetree/bindings/leds/leds-lp55xx.yaml b/Documentation/devicetree/bindings/leds/leds-lp55xx.yaml
new file mode 100644
index 000000000000..c39003c16536
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-lp55xx.yaml
@@ -0,0 +1,218 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/leds-lp55xx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI/National Semiconductor LP55xx and LP8501 LED Drivers
+
+maintainers:
+ - Jacek Anaszewski <jacek.anaszewski@...il.com>
+ - Pavel Machek <pavel@....cz>
+
+description: |
+ Bindings for the TI/National Semiconductor LP55xx and LP8501 multi channel
+ LED Drivers.
+
+ For more product information please see the link below:
+ https://www.ti.com/lit/gpn/lp5521
+ https://www.ti.com/lit/gpn/lp5523
+ https://www.ti.com/lit/gpn/lp55231
+ https://www.ti.com/lit/gpn/lp5562
+ https://www.ti.com/lit/gpn/lp8501
+
+properties:
+ compatible:
+ enum:
+ - national,lp5521
+ - national,lp5523
+ - ti,lp55231
+ - ti,lp5562
+ - ti,lp8501
+
+ reg:
+ maxItems: 1
+ description: I2C slave address
+
+ clock-mode:
+ $ref: /schemas/types.yaml#definitions/uint8
+ description: |
+ Input clock mode
+ enum:
+ - 0 # automode
+ - 1 # internal
+ - 2 # external
+
+ enable-gpio:
+ maxItems: 1
+ description: |
+ GPIO attached to the chip's enable pin
+
+ pwr-sel:
+ $ref: /schemas/types.yaml#definitions/uint8
+ description: |
+ LP8501 specific property. Power selection for output channels.
+ enum:
+ - 0 # D1~9 are connected to VDD
+ - 1 # D1~6 with VDD, D7~9 with VOUT
+ - 2 # D1~6 with VOUT, D7~9 with VDD
+ - 3 # D1~9 are connected to VOUT
+
+patternProperties:
+ "(^led@[0-9a-f]$|led)":
+ type: object
+ $ref: common.yaml#
+ properties:
+ led-cur:
+ $ref: /schemas/types.yaml#definitions/uint8
+ description: |
+ Current setting at each LED channel (mA x10, 0 if LED is not connected)
+
+ max-cur:
+ $ref: /schemas/types.yaml#definitions/uint8
+ description: Maximun current at each LED channel.
+
+ reg:
+ description: |
+ Output channel for the LED. This is zero based channel identifier and
+ the data sheet is a one based channel identifier.
+ reg value to output to LED output number
+ enum:
+ - 0 # LED output D1
+ - 1 # LED output D2
+ - 2 # LED output D3
+ - 3 # LED output D4
+ - 4 # LED output D5
+ - 5 # LED output D6
+ - 6 # LED output D7
+ - 7 # LED output D8
+ - 8 # LED output D9
+
+ chan-name:
+ $ref: /schemas/types.yaml#definitions/string
+ description: name of channel
+
+required:
+ - compatible
+ - reg
+
+examples:
+ - |
+ #include <dt-bindings/leds/common.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led-controller@32 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "ti,lp8501";
+ reg = <0x32>;
+ clock-mode = /bits/ 8 <2>;
+ pwr-sel = /bits/ 8 <3>; /* D1~9 connected to VOUT */
+
+ led@0 {
+ reg = <0>;
+ chan-name = "d1";
+ led-cur = /bits/ 8 <0x14>;
+ max-cur = /bits/ 8 <0x20>;
+ };
+
+ led@1 {
+ reg = <1>;
+ chan-name = "d2";
+ led-cur = /bits/ 8 <0x14>;
+ max-cur = /bits/ 8 <0x20>;
+ };
+
+ led@2 {
+ reg = <2>;
+ chan-name = "d3";
+ led-cur = /bits/ 8 <0x14>;
+ max-cur = /bits/ 8 <0x20>;
+ };
+
+ led@3 {
+ reg = <3>;
+ chan-name = "d4";
+ led-cur = /bits/ 8 <0x14>;
+ max-cur = /bits/ 8 <0x20>;
+ };
+
+ led@4 {
+ reg = <4>;
+ chan-name = "d5";
+ led-cur = /bits/ 8 <0x14>;
+ max-cur = /bits/ 8 <0x20>;
+ };
+
+ led@5 {
+ reg = <5>;
+ chan-name = "d6";
+ led-cur = /bits/ 8 <0x14>;
+ max-cur = /bits/ 8 <0x20>;
+ };
+
+ led@6 {
+ reg = <6>;
+ chan-name = "d7";
+ led-cur = /bits/ 8 <0x14>;
+ max-cur = /bits/ 8 <0x20>;
+ };
+
+ led@7 {
+ reg = <7>;
+ chan-name = "d8";
+ led-cur = /bits/ 8 <0x14>;
+ max-cur = /bits/ 8 <0x20>;
+ };
+
+ led@8 {
+ reg = <8>;
+ chan-name = "d9";
+ led-cur = /bits/ 8 <0x14>;
+ max-cur = /bits/ 8 <0x20>;
+ };
+ };
+
+ led-controller@33 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "national,lp5523";
+ reg = <0x33>;
+ clock-mode = /bits/ 8 <0>;
+
+ multi-led@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x2>;
+ color = <LED_COLOR_ID_MULTI>;
+ function = LED_FUNCTION_STANDBY;
+ linux,default-trigger = "heartbeat";
+
+ led@0 {
+ led-cur = /bits/ 8 <50>;
+ max-cur = /bits/ 8 <100>;
+ reg = <0x0>;
+ color = <LED_COLOR_ID_GREEN>;
+ };
+
+ led@1 {
+ led-cur = /bits/ 8 <50>;
+ max-cur = /bits/ 8 <100>;
+ reg = <0x1>;
+ color = <LED_COLOR_ID_BLUE>;
+ };
+
+ led@6 {
+ led-cur = /bits/ 8 <50>;
+ max-cur = /bits/ 8 <100>;
+ reg = <0x6>;
+ color = <LED_COLOR_ID_RED>;
+ };
+ };
+ };
+ };
+
+...
--
2.26.2
Powered by blists - more mailing lists