linux-kernel - [RESEND PATCH v4 0/7] Convert mtk-dsi to drm_bridge API and get EDID for ps8640 bridge

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20200615203108.786083-1-enric.balletbo@collabora.com>
Date:   Mon, 15 Jun 2020 22:31:01 +0200
From:   Enric Balletbo i Serra <enric.balletbo@...labora.com>
To:     linux-kernel@...r.kernel.org,
        Collabora Kernel ML <kernel@...labora.com>
Cc:     matthias.bgg@...il.com, drinkcat@...omium.org, hsinyi@...omium.org,
        laurent.pinchart@...asonboard.com,
        Andrzej Hajda <a.hajda@...sung.com>,
        Chun-Kuang Hu <chunkuang.hu@...nel.org>,
        Daniel Vetter <daniel@...ll.ch>,
        David Airlie <airlied@...ux.ie>,
        Jernej Skrabec <jernej.skrabec@...l.net>,
        Jonas Karlman <jonas@...boo.se>,
        Laurent Pinchart <Laurent.pinchart@...asonboard.com>,
        Maarten Lankhorst <maarten.lankhorst@...ux.intel.com>,
        Maxime Ripard <mripard@...nel.org>,
        Neil Armstrong <narmstrong@...libre.com>,
        Philipp Zabel <p.zabel@...gutronix.de>,
        Thomas Zimmermann <tzimmermann@...e.de>,
        dri-devel@...ts.freedesktop.org,
        linux-arm-kernel@...ts.infradead.org,
        linux-mediatek@...ts.infradead.org
Subject: [RESEND PATCH v4 0/7] Convert mtk-dsi to drm_bridge API and get EDID for ps8640 bridge

(This resend is to fix some trivial conflicts due the merge window)

The PS8640 dsi-to-eDP bridge driver is using the panel bridge API,
however, not all the components in the chain have been ported to the
drm_bridge API. Actually, when a panel is attached the default panel's mode
is used, but in some cases we can't get display up if mode getting from
eDP control EDID is not chosen.

This series address that problem, first implements the .get_edid()
callback in the PS8640 driver (which is not used until the conversion is
done) and then, converts the Mediatek DSI driver to use the drm_bridge
API.

As far as I know, we're the only users of the mediatek dsi driver in
mainline, so should be safe to switch to the new chain of drm_bridge API
unconditionally.

The patches has been tested on a Acer Chromebook R13 (Elm) running a
Chrome OS userspace and checking that the valid EDID mode reported by
the bridge is selected.

Changes in v4:
- Remove double call to drm_encoder_init(). (Chun-Kuang Hu)
- Cleanup the encoder in mtk_dsi_unbind(). (Chun-Kuang Hu)

Changes in v3:
- Replace s/bridge/next bridge/ for comment. (Laurent Pinchart)
- Add the bridge.type. (Laurent Pinchart)
- Use next_bridge field to store the panel bridge. (Laurent Pinchart)
- Add the bridge.type field. (Laurent Pinchart)
- This patch requires https://lkml.org/lkml/2020/4/16/2080 to work
  properly.
- Move the bridge.type line to the patch that adds drm_bridge support. (Laurent Pinchart)

Changes in v2:
- Do not set connector_type for panel here. (Sam Ravnborg)

Enric Balletbo i Serra (7):
  drm/bridge: ps8640: Get the EDID from eDP control
  drm/bridge_connector: Set default status connected for eDP connectors
  drm/mediatek: mtk_dsi: Rename bridge to next_bridge
  drm/mediatek: mtk_dsi: Convert to bridge driver
  drm/mediatek: mtk_dsi: Use simple encoder
  drm/mediatek: mtk_dsi: Use the drm_panel_bridge API
  drm/mediatek: mtk_dsi: Create connector for bridges

 drivers/gpu/drm/bridge/parade-ps8640.c |  12 ++
 drivers/gpu/drm/drm_bridge_connector.c |   1 +
 drivers/gpu/drm/mediatek/mtk_dsi.c     | 269 ++++++++-----------------
 3 files changed, 97 insertions(+), 185 deletions(-)

-- 
2.27.0