linux-kernel - [PATCH] usb: gadget: function: printer: Add gadget dev interface status judgment

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <20200615094608.26179-1-qiang.zhang@windriver.com>
Date:   Mon, 15 Jun 2020 17:46:08 +0800
From:   <qiang.zhang@...driver.com>
To:     <balbi@...nel.org>
CC:     <gregkh@...uxfoundation.org>, <linux-usb@...r.kernel.org>,
        <linux-kernel@...r.kernel.org>
Subject: [PATCH] usb: gadget: function: printer: Add gadget dev interface status judgment

From: Zqiang <qiang.zhang@...driver.com>

After the interface of gadget printer device was disabled,
We should not continue operate the device.

Signed-off-by: Zqiang <qiang.zhang@...driver.com>
---
 drivers/usb/gadget/function/f_printer.c | 36 +++++++++++++++++++++++++
 1 file changed, 36 insertions(+)

diff --git a/drivers/usb/gadget/function/f_printer.c b/drivers/usb/gadget/function/f_printer.c
index 9c7ed2539ff7..2b45a61e4213 100644
--- a/drivers/usb/gadget/function/f_printer.c
+++ b/drivers/usb/gadget/function/f_printer.c
@@ -338,6 +338,11 @@ printer_open(struct inode *inode, struct file *fd)
 
 	spin_lock_irqsave(&dev->lock, flags);
 
+	if (dev->interface < 0) {
+		spin_unlock_irqrestore(&dev->lock, flags);
+		return -ENODEV;
+	}
+
 	if (!dev->printer_cdev_open) {
 		dev->printer_cdev_open = 1;
 		fd->private_data = dev;
@@ -430,6 +435,12 @@ printer_read(struct file *fd, char __user *buf, size_t len, loff_t *ptr)
 	mutex_lock(&dev->lock_printer_io);
 	spin_lock_irqsave(&dev->lock, flags);
 
+	if (dev->interface < 0) {
+		spin_unlock_irqrestore(&dev->lock, flags);
+		mutex_unlock(&dev->lock_printer_io);
+		return -ENODEV;
+	}
+
 	/* We will use this flag later to check if a printer reset happened
 	 * after we turn interrupts back on.
 	 */
@@ -561,6 +572,12 @@ printer_write(struct file *fd, const char __user *buf, size_t len, loff_t *ptr)
 	mutex_lock(&dev->lock_printer_io);
 	spin_lock_irqsave(&dev->lock, flags);
 
+	if (dev->interface < 0) {
+		spin_unlock_irqrestore(&dev->lock, flags);
+		mutex_unlock(&dev->lock_printer_io);
+		return -ENODEV;
+	}
+
 	/* Check if a printer reset happens while we have interrupts on */
 	dev->reset_printer = 0;
 
@@ -667,6 +684,13 @@ printer_fsync(struct file *fd, loff_t start, loff_t end, int datasync)
 
 	inode_lock(inode);
 	spin_lock_irqsave(&dev->lock, flags);
+
+	if (dev->interface < 0) {
+		spin_unlock_irqrestore(&dev->lock, flags);
+		inode_unlock(inode);
+		return -ENODEV;
+	}
+
 	tx_list_empty = (likely(list_empty(&dev->tx_reqs)));
 	spin_unlock_irqrestore(&dev->lock, flags);
 
@@ -689,6 +713,13 @@ printer_poll(struct file *fd, poll_table *wait)
 
 	mutex_lock(&dev->lock_printer_io);
 	spin_lock_irqsave(&dev->lock, flags);
+
+	if (dev->interface < 0) {
+		spin_unlock_irqrestore(&dev->lock, flags);
+		mutex_unlock(&dev->lock_printer_io);
+		return EPOLLERR | EPOLLHUP;
+	}
+
 	setup_rx_reqs(dev);
 	spin_unlock_irqrestore(&dev->lock, flags);
 	mutex_unlock(&dev->lock_printer_io);
@@ -722,6 +753,11 @@ printer_ioctl(struct file *fd, unsigned int code, unsigned long arg)
 
 	spin_lock_irqsave(&dev->lock, flags);
 
+	if (dev->interface < 0) {
+		spin_unlock_irqrestore(&dev->lock, flags);
+		return -ENODEV;
+	}
+
 	switch (code) {
 	case GADGET_GET_PRINTER_STATUS:
 		status = (int)dev->printer_status;
-- 
2.24.1