Message-Id: <20200615104315.17200-1-m.szyprowski@samsung.com>
Date:   Mon, 15 Jun 2020 12:43:15 +0200
From:   Marek Szyprowski <m.szyprowski@...sung.com>
To:     linux-kernel@...r.kernel.org, linux-pm@...r.kernel.org,
        Mark Brown <broonie@...nel.org>
Cc:     Marek Szyprowski <m.szyprowski@...sung.com>,
        Liam Girdwood <lgirdwood@...il.com>,
        Dmitry Osipenko <digetx@...il.com>,
        Lucas Stach <l.stach@...gutronix.de>,
        Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>,
        Krzysztof Kozlowski <krzk@...nel.org>,
        Viresh Kumar <viresh.kumar@...aro.org>, peron.clem@...il.com,
        Nishanth Menon <nm@...com>, Stephen Boyd <sboyd@...nel.org>,
        Vincent Guittot <vincent.guittot@...aro.org>,
        Rafael Wysocki <rjw@...ysocki.net>,
        linux-samsung-soc@...r.kernel.org,
        Chanwoo Choi <cw00.choi@...sung.com>,
        Saravana Kannan <saravanak@...gle.com>
Subject: [PATCH v4] soc: samsung: Add simple voltage coupler for Exynos5800

Add a simple custom voltage regulator coupler for Exynos5800 SoCs, which
require coupling between "vdd_arm" and "vdd_int" regulators. This coupler
ensures that the voltage values don't go below the bootloader-selected
operation point during the boot process until a the clients sets their
constraints. It is achieved by assuming minimal voltage value equal to
the current value if no constraints are set. This also ensures proper
voltage balancing if any of the client driver is missing.

The balancing code comes from the regulator/core.c with the additional
logic for handling regulators without client constraints applied added.

Reviewed-by: Dmitry Osipenko <digetx@...il.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@...sung.com>
---
This patch is yet another attempt to fix the regulator coupling on
Exynos5800/5422 SoCs. Here are links to the previous attempts and
discussions:

https://lore.kernel.org/linux-samsung-soc/20191008101709.qVNy8eijBi0LynOteWFMnTg4GUwKG599n6OyYoX1Abs@z/
https://lore.kernel.org/lkml/20191017102758.8104-1-m.szyprowski@samsung.com/
https://lore.kernel.org/linux-pm/cover.1589528491.git.viresh.kumar@linaro.org/
https://lore.kernel.org/linux-pm/20200528131130.17984-1-m.szyprowski@samsung.com/
https://lore.kernel.org/linux-samsung-soc/57cf3a15-5d9b-7636-4c69-60742e8cfae6@samsung.com/
https://lore.kernel.org/lkml/20200605063724.9030-1-m.szyprowski@samsung.com/

The problem is with "vdd_int" regulator coupled with "vdd_arm" on Odroid
XU3/XU4 boards family. "vdd_arm" is handled by CPUfreq. "vdd_int" is
handled by devfreq. CPUfreq initialized quite early during boot and it
starts changing OPPs and "vdd_arm" value. Sometimes CPU activity during
boot goes down and some low-frequency OPPs are selected, what in turn
causes lowering "vdd_arm". This happens before devfreq applies its
requirements on "vdd_int". Regulator balancing code reduces "vdd_arm"
voltage value, what in turn causes lowering "vdd_int" value to the lowest
possible value. This is much below the operation point of the wcore bus,
which still runs at the highest frequency.

The issue was hard to notice because in the most cases the board managed
to boot properly, even when the regulator was set to lowest value allowed
by the regulator constraints. However, it caused some random issues,
which can be observed as "Unhandled prefetch abort" or low USB stability.

Handling this case in the generic code has been rejected, so the only way
to ensure the desired behavior on Exynos5800-based SoCs is to make a
custom regulator coupler driver. I've tried hard to extract some common
code to simplify the exynos-regulator-coupler driver as much as possible,
but the difference between it and the generic code is so deep that this
approach failed, so indead I simply copied and modified the balancing
code.

Best regards
Marek Szyprowski
---
 arch/arm/mach-exynos/Kconfig                  |   1 +
 drivers/soc/samsung/Kconfig                   |   3 +
 drivers/soc/samsung/Makefile                  |   1 +
 .../soc/samsung/exynos-regulator-coupler.c    | 221 ++++++++++++++++++
 4 files changed, 226 insertions(+)
 create mode 100644 drivers/soc/samsung/exynos-regulator-coupler.c

diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index 76838255b5fa..f185cd3d4c62 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -118,6 +118,7 @@ config SOC_EXYNOS5800
 	bool "Samsung EXYNOS5800"
 	default y
 	depends on SOC_EXYNOS5420
+	select EXYNOS_REGULATOR_COUPLER
 
 config EXYNOS_MCPM
 	bool
diff --git a/drivers/soc/samsung/Kconfig b/drivers/soc/samsung/Kconfig
index 19c4d3f1437b..5d7819b52eed 100644
--- a/drivers/soc/samsung/Kconfig
+++ b/drivers/soc/samsung/Kconfig
@@ -43,4 +43,7 @@ config EXYNOS_PM_DOMAINS
 	bool "Exynos PM domains" if COMPILE_TEST
 	depends on PM_GENERIC_DOMAINS || COMPILE_TEST
 
+config EXYNOS_REGULATOR_COUPLER
+	bool "Exynos SoC Regulator Coupler" if COMPILE_TEST
+	depends on ARCH_EXYNOS || COMPILE_TEST
 endif
diff --git a/drivers/soc/samsung/Makefile b/drivers/soc/samsung/Makefile
index 31db65cb7aa3..93285faec416 100644
--- a/drivers/soc/samsung/Makefile
+++ b/drivers/soc/samsung/Makefile
@@ -10,3 +10,4 @@ obj-$(CONFIG_EXYNOS_PMU_ARM_DRIVERS)	+= exynos3250-pmu.o exynos4-pmu.o \
 					exynos5250-pmu.o exynos5420-pmu.o
 obj-$(CONFIG_EXYNOS_PMU_ARM64_DRIVERS)	+= exynos-pm.o exynos5433-pmu.o
 obj-$(CONFIG_EXYNOS_PM_DOMAINS) += pm_domains.o
+obj-$(CONFIG_EXYNOS_REGULATOR_COUPLER) += exynos-regulator-coupler.o
diff --git a/drivers/soc/samsung/exynos-regulator-coupler.c b/drivers/soc/samsung/exynos-regulator-coupler.c
new file mode 100644
index 000000000000..3cafc1738eb6
--- /dev/null
+++ b/drivers/soc/samsung/exynos-regulator-coupler.c
@@ -0,0 +1,221 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2020 Samsung Electronics Co., Ltd.
+ *	      http://www.samsung.com/
+ * Author: Marek Szyprowski <m.szyprowski@...sung.com>
+ *
+ * Simplified generic voltage coupler from regulator core.c
+ * The main difference is that it keeps current regulator voltage
+ * if consumers didn't apply their constraints yet.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/regulator/coupler.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+
+static int regulator_get_optimal_voltage(struct regulator_dev *rdev,
+					 int *current_uV,
+					 int *min_uV, int *max_uV,
+					 suspend_state_t state)
+{
+	struct coupling_desc *c_desc = &rdev->coupling_desc;
+	struct regulator_dev **c_rdevs = c_desc->coupled_rdevs;
+	struct regulation_constraints *constraints = rdev->constraints;
+	int desired_min_uV = 0, desired_max_uV = INT_MAX;
+	int max_current_uV = 0, min_current_uV = INT_MAX;
+	int highest_min_uV = 0, target_uV, possible_uV;
+	int i, ret, max_spread, n_coupled = c_desc->n_coupled;
+	bool done;
+
+	*current_uV = -1;
+
+	/* Find highest min desired voltage */
+	for (i = 0; i < n_coupled; i++) {
+		int tmp_min = 0;
+		int tmp_max = INT_MAX;
+
+		lockdep_assert_held_once(&c_rdevs[i]->mutex.base);
+
+		ret = regulator_check_consumers(c_rdevs[i],
+						&tmp_min,
+						&tmp_max, state);
+		if (ret < 0)
+			return ret;
+
+		if (tmp_min == 0) {
+			ret = regulator_get_voltage_rdev(c_rdevs[i]);
+			if (ret < 0)
+				return ret;
+			tmp_min = ret;
+		}
+
+		/* apply constraints */
+		ret = regulator_check_voltage(c_rdevs[i], &tmp_min, &tmp_max);
+		if (ret < 0)
+			return ret;
+
+		highest_min_uV = max(highest_min_uV, tmp_min);
+
+		if (i == 0) {
+			desired_min_uV = tmp_min;
+			desired_max_uV = tmp_max;
+		}
+	}
+
+	max_spread = constraints->max_spread[0];
+
+	/*
+	 * Let target_uV be equal to the desired one if possible.
+	 * If not, set it to minimum voltage, allowed by other coupled
+	 * regulators.
+	 */
+	target_uV = max(desired_min_uV, highest_min_uV - max_spread);
+
+	/*
+	 * Find min and max voltages, which currently aren't violating
+	 * max_spread.
+	 */
+	for (i = 1; i < n_coupled; i++) {
+		int tmp_act;
+
+		tmp_act = regulator_get_voltage_rdev(c_rdevs[i]);
+		if (tmp_act < 0)
+			return tmp_act;
+
+		min_current_uV = min(tmp_act, min_current_uV);
+		max_current_uV = max(tmp_act, max_current_uV);
+	}
+
+	/*
+	 * Correct target voltage, so as it currently isn't
+	 * violating max_spread
+	 */
+	possible_uV = max(target_uV, max_current_uV - max_spread);
+	possible_uV = min(possible_uV, min_current_uV + max_spread);
+
+	if (possible_uV > desired_max_uV)
+		return -EINVAL;
+
+	done = (possible_uV == target_uV);
+	desired_min_uV = possible_uV;
+
+	/* Set current_uV if wasn't done earlier in the code and if necessary */
+	if (*current_uV == -1) {
+		ret = regulator_get_voltage_rdev(rdev);
+		if (ret < 0)
+			return ret;
+		*current_uV = ret;
+	}
+
+	*min_uV = desired_min_uV;
+	*max_uV = desired_max_uV;
+
+	return done;
+}
+
+static int exynos_coupler_balance_voltage(struct regulator_coupler *coupler,
+					  struct regulator_dev *rdev,
+					  suspend_state_t state)
+{
+	struct regulator_dev **c_rdevs;
+	struct regulator_dev *best_rdev;
+	struct coupling_desc *c_desc = &rdev->coupling_desc;
+	int i, ret, n_coupled, best_min_uV, best_max_uV, best_c_rdev;
+	unsigned int delta, best_delta;
+	unsigned long c_rdev_done = 0;
+	bool best_c_rdev_done;
+
+	c_rdevs = c_desc->coupled_rdevs;
+	n_coupled = c_desc->n_coupled;
+
+	/*
+	 * Find the best possible voltage change on each loop. Leave the loop
+	 * if there isn't any possible change.
+	 */
+	do {
+		best_c_rdev_done = false;
+		best_delta = 0;
+		best_min_uV = 0;
+		best_max_uV = 0;
+		best_c_rdev = 0;
+		best_rdev = NULL;
+
+		/*
+		 * Find highest difference between optimal voltage
+		 * and current voltage.
+		 */
+		for (i = 0; i < n_coupled; i++) {
+			/*
+			 * optimal_uV is the best voltage that can be set for
+			 * i-th regulator at the moment without violating
+			 * max_spread constraint in order to balance
+			 * the coupled voltages.
+			 */
+			int optimal_uV = 0, optimal_max_uV = 0, current_uV = 0;
+
+			if (test_bit(i, &c_rdev_done))
+				continue;
+
+			ret = regulator_get_optimal_voltage(c_rdevs[i],
+							    &current_uV,
+							    &optimal_uV,
+							    &optimal_max_uV,
+							    state);
+			if (ret < 0)
+				goto out;
+
+			delta = abs(optimal_uV - current_uV);
+
+			if (delta && best_delta <= delta) {
+				best_c_rdev_done = ret;
+				best_delta = delta;
+				best_rdev = c_rdevs[i];
+				best_min_uV = optimal_uV;
+				best_max_uV = optimal_max_uV;
+				best_c_rdev = i;
+			}
+		}
+
+		/* Nothing to change, return successfully */
+		if (!best_rdev) {
+			ret = 0;
+			goto out;
+		}
+
+		ret = regulator_set_voltage_rdev(best_rdev, best_min_uV,
+						 best_max_uV, state);
+
+		if (ret < 0)
+			goto out;
+
+		if (best_c_rdev_done)
+			set_bit(best_c_rdev, &c_rdev_done);
+
+	} while (n_coupled > 1);
+
+out:
+	return ret;
+}
+
+static int exynos_coupler_attach(struct regulator_coupler *coupler,
+				 struct regulator_dev *rdev)
+{
+	return 0;
+}
+
+static struct regulator_coupler exynos_coupler = {
+	.attach_regulator = exynos_coupler_attach,
+	.balance_voltage  = exynos_coupler_balance_voltage,
+};
+
+static int __init exynos_coupler_init(void)
+{
+	if (!of_machine_is_compatible("samsung,exynos5800"))
+		return 0;
+
+	return regulator_coupler_register(&exynos_coupler);
+}
+arch_initcall(exynos_coupler_init);
-- 
2.17.1

Powered by blists - more mailing lists