lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20200615125951.28008-3-alexandre.torgue@st.com>
Date:   Mon, 15 Jun 2020 14:59:51 +0200
From:   Alexandre Torgue <alexandre.torgue@...com>
To:     Linus Walleij <linus.walleij@...aro.org>
CC:     <linux-kernel@...r.kernel.org>, <linux-gpio@...r.kernel.org>,
        <linux-stm32@...md-mailman.stormreply.com>,
        <alexandre.torgue@...com>
Subject: [PATCH 2/2] pinctrl: stm32: add possibility to configure pins individually

Adds the possibility to configure a single pin through the gpiolib (i.e:
to set PULL_UP/PULL_DOWN config).
Mutex behavior is slightly changed to avoid a deadlock when pin_config_set
is called (in this case pctldev->mutex is already taken).

Signed-off-by: Alexandre Torgue <alexandre.torgue@...com>

diff --git a/drivers/pinctrl/stm32/pinctrl-stm32.c b/drivers/pinctrl/stm32/pinctrl-stm32.c
index 5d9839beaa07..b5cb7d9536dc 100644
--- a/drivers/pinctrl/stm32/pinctrl-stm32.c
+++ b/drivers/pinctrl/stm32/pinctrl-stm32.c
@@ -302,6 +302,7 @@ static const struct gpio_chip stm32_gpio_template = {
 	.direction_output	= stm32_gpio_direction_output,
 	.to_irq			= stm32_gpio_to_irq,
 	.get_direction		= stm32_gpio_get_direction,
+	.set_config		= gpiochip_generic_config,
 };
 
 static void stm32_gpio_irq_trigger(struct irq_data *d)
@@ -1051,7 +1052,7 @@ static int stm32_pconf_parse_conf(struct pinctrl_dev *pctldev,
 	struct stm32_gpio_bank *bank;
 	int offset, ret = 0;
 
-	range = pinctrl_find_gpio_range_from_pin(pctldev, pin);
+	range = pinctrl_find_gpio_range_from_pin_nolock(pctldev, pin);
 	if (!range) {
 		dev_err(pctl->dev, "No gpio range defined.\n");
 		return -EINVAL;
@@ -1109,9 +1110,11 @@ static int stm32_pconf_group_set(struct pinctrl_dev *pctldev, unsigned group,
 	int i, ret;
 
 	for (i = 0; i < num_configs; i++) {
+		mutex_lock(&pctldev->mutex);
 		ret = stm32_pconf_parse_conf(pctldev, g->pin,
 			pinconf_to_config_param(configs[i]),
 			pinconf_to_config_argument(configs[i]));
+		mutex_unlock(&pctldev->mutex);
 		if (ret < 0)
 			return ret;
 
@@ -1121,6 +1124,22 @@ static int stm32_pconf_group_set(struct pinctrl_dev *pctldev, unsigned group,
 	return 0;
 }
 
+static int stm32_pconf_set(struct pinctrl_dev *pctldev, unsigned int pin,
+			   unsigned long *configs, unsigned int num_configs)
+{
+	int i, ret;
+
+	for (i = 0; i < num_configs; i++) {
+		ret = stm32_pconf_parse_conf(pctldev, pin,
+				pinconf_to_config_param(configs[i]),
+				pinconf_to_config_argument(configs[i]));
+		if (ret < 0)
+			return ret;
+	}
+
+	return 0;
+}
+
 static void stm32_pconf_dbg_show(struct pinctrl_dev *pctldev,
 				 struct seq_file *s,
 				 unsigned int pin)
@@ -1186,10 +1205,10 @@ static void stm32_pconf_dbg_show(struct pinctrl_dev *pctldev,
 	}
 }
 
-
 static const struct pinconf_ops stm32_pconf_ops = {
 	.pin_config_group_get	= stm32_pconf_group_get,
 	.pin_config_group_set	= stm32_pconf_group_set,
+	.pin_config_set		= stm32_pconf_set,
 	.pin_config_dbg_show	= stm32_pconf_dbg_show,
 };
 
-- 
2.17.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ