[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20200616153110.284300762@linuxfoundation.org>
Date: Tue, 16 Jun 2020 17:34:32 +0200
From: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To: linux-kernel@...r.kernel.org
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
stable@...r.kernel.org, Dave Rodgman <dave.rodgman@....com>,
Andrew Morton <akpm@...ux-foundation.org>,
Mark Rutland <mark.rutland@....com>, Willy Tarreau <w@....eu>,
Sergey Senozhatsky <sergey.senozhatsky.work@...il.com>,
"Markus F.X.J. Oberhumer" <markus@...rhumer.com>,
Minchan Kim <minchan@...nel.org>,
Nitin Gupta <ngupta@...are.org>, Chao Yu <yuchao0@...wei.com>,
Linus Torvalds <torvalds@...ux-foundation.org>
Subject: [PATCH 5.6 082/161] lib/lzo: fix ambiguous encoding bug in lzo-rle
From: Dave Rodgman <dave.rodgman@....com>
commit b5265c813ce4efbfa2e46fd27cdf9a7f44a35d2e upstream.
In some rare cases, for input data over 32 KB, lzo-rle could encode two
different inputs to the same compressed representation, so that
decompression is then ambiguous (i.e. data may be corrupted - although
zram is not affected because it operates over 4 KB pages).
This modifies the compressor without changing the decompressor or the
bitstream format, such that:
- there is no change to how data produced by the old compressor is
decompressed
- an old decompressor will correctly decode data from the updated
compressor
- performance and compression ratio are not affected
- we avoid introducing a new bitstream format
In testing over 12.8M real-world files totalling 903 GB, three files
were affected by this bug. I also constructed 37M semi-random 64 KB
files totalling 2.27 TB, and saw no affected files. Finally I tested
over files constructed to contain each of the ~1024 possible bad input
sequences; for all of these cases, updated lzo-rle worked correctly.
There is no significant impact to performance or compression ratio.
Signed-off-by: Dave Rodgman <dave.rodgman@....com>
Signed-off-by: Andrew Morton <akpm@...ux-foundation.org>
Cc: Mark Rutland <mark.rutland@....com>
Cc: Dave Rodgman <dave.rodgman@....com>
Cc: Willy Tarreau <w@....eu>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@...il.com>
Cc: Markus F.X.J. Oberhumer <markus@...rhumer.com>
Cc: Minchan Kim <minchan@...nel.org>
Cc: Nitin Gupta <ngupta@...are.org>
Cc: Chao Yu <yuchao0@...wei.com>
Cc: <stable@...r.kernel.org>
Link: http://lkml.kernel.org/r/20200507100203.29785-1-dave.rodgman@arm.com
Signed-off-by: Linus Torvalds <torvalds@...ux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
---
Documentation/lzo.txt | 8 ++++++--
lib/lzo/lzo1x_compress.c | 13 +++++++++++++
2 files changed, 19 insertions(+), 2 deletions(-)
--- a/Documentation/lzo.txt
+++ b/Documentation/lzo.txt
@@ -159,11 +159,15 @@ Byte sequences
distance = 16384 + (H << 14) + D
state = S (copy S literals after this block)
End of stream is reached if distance == 16384
+ In version 1 only, to prevent ambiguity with the RLE case when
+ ((distance & 0x803f) == 0x803f) && (261 <= length <= 264), the
+ compressor must not emit block copies where distance and length
+ meet these conditions.
In version 1 only, this instruction is also used to encode a run of
- zeros if distance = 0xbfff, i.e. H = 1 and the D bits are all 1.
+ zeros if distance = 0xbfff, i.e. H = 1 and the D bits are all 1.
In this case, it is followed by a fourth byte, X.
- run length = ((X << 3) | (0 0 0 0 0 L L L)) + 4.
+ run length = ((X << 3) | (0 0 0 0 0 L L L)) + 4
0 0 1 L L L L L (32..63)
Copy of small block within 16kB distance (preferably less than 34B)
--- a/lib/lzo/lzo1x_compress.c
+++ b/lib/lzo/lzo1x_compress.c
@@ -268,6 +268,19 @@ m_len_done:
*op++ = (M4_MARKER | ((m_off >> 11) & 8)
| (m_len - 2));
else {
+ if (unlikely(((m_off & 0x403f) == 0x403f)
+ && (m_len >= 261)
+ && (m_len <= 264))
+ && likely(bitstream_version)) {
+ // Under lzo-rle, block copies
+ // for 261 <= length <= 264 and
+ // (distance & 0x80f3) == 0x80f3
+ // can result in ambiguous
+ // output. Adjust length
+ // to 260 to prevent ambiguity.
+ ip -= m_len - 260;
+ m_len = 260;
+ }
m_len -= M4_MAX_LEN;
*op++ = (M4_MARKER | ((m_off >> 11) & 8));
while (unlikely(m_len > 255)) {
Powered by blists - more mailing lists