[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20200616205533.3513-4-james.quinlan@broadcom.com>
Date: Tue, 16 Jun 2020 16:55:10 -0400
From: Jim Quinlan <james.quinlan@...adcom.com>
To: linux-pci@...r.kernel.org, Christoph Hellwig <hch@....de>,
Nicolas Saenz Julienne <nsaenzjulienne@...e.de>,
bcm-kernel-feedback-list@...adcom.com, james.quinlan@...adcom.com
Cc: Jim Quinlan <james.quinlan@...adcom.com>,
Florian Fainelli <f.fainelli@...il.com>,
Bjorn Helgaas <bhelgaas@...gle.com>,
Rob Herring <robh+dt@...nel.org>,
linux-arm-kernel@...ts.infradead.org (moderated list:BROADCOM BCM7XXX
ARM ARCHITECTURE),
linux-rpi-kernel@...ts.infradead.org (moderated list:BROADCOM
BCM2711/BCM2835 ARM ARCHITECTURE),
devicetree@...r.kernel.org (open list:OPEN FIRMWARE AND FLATTENED
DEVICE TREE BINDINGS), linux-kernel@...r.kernel.org (open list)
Subject: [PATCH v5 03/12] dt-bindings: PCI: Add bindings for more Brcmstb chips
From: Jim Quinlan <jquinlan@...adcom.com>
- Add compatible strings for three more Broadcom STB chips: 7278, 7216,
7211 (STB version of RPi4).
- add new property 'brcm,scb-sizes'
- add new property 'resets'
- add new property 'reset-names' for 7216 only
- allow 'ranges' and 'dma-ranges' to have more than one item and update
the example to show this.
Signed-off-by: Jim Quinlan <jquinlan@...adcom.com>
Reviewed-by: Rob Herring <robh@...nel.org>
---
.../bindings/pci/brcm,stb-pcie.yaml | 56 ++++++++++++++++---
1 file changed, 49 insertions(+), 7 deletions(-)
diff --git a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
index 8680a0f86c5a..807694b4f41f 100644
--- a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
+++ b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
@@ -9,12 +9,15 @@ title: Brcmstb PCIe Host Controller Device Tree Bindings
maintainers:
- Nicolas Saenz Julienne <nsaenzjulienne@...e.de>
-allOf:
- - $ref: /schemas/pci/pci-bus.yaml#
-
properties:
compatible:
- const: brcm,bcm2711-pcie # The Raspberry Pi 4
+ items:
+ - enum:
+ - brcm,bcm2711-pcie # The Raspberry Pi 4
+ - brcm,bcm7211-pcie # Broadcom STB version of RPi4
+ - brcm,bcm7278-pcie # Broadcom 7278 Arm
+ - brcm,bcm7216-pcie # Broadcom 7216 Arm
+ - brcm,bcm7445-pcie # Broadcom 7445 Arm
reg:
maxItems: 1
@@ -34,10 +37,12 @@ properties:
- const: msi
ranges:
- maxItems: 1
+ minItems: 1
+ maxItems: 4
dma-ranges:
- maxItems: 1
+ minItems: 1
+ maxItems: 6
clocks:
maxItems: 1
@@ -58,8 +63,31 @@ properties:
aspm-no-l0s: true
+ resets:
+ description: for "brcm,bcm7216-pcie", must be a valid reset
+ phandle pointing to the RESCAL reset controller provider node.
+ $ref: "/schemas/types.yaml#/definitions/phandle"
+
+ reset-names:
+ items:
+ - const: rescal
+
+ brcm,scb-sizes:
+ description: u64 giving the 64bit PCIe memory
+ viewport size of a memory controller. There may be up to
+ three controllers, and each size must be a power of two
+ with a size greater or equal to the amount of memory the
+ controller supports. Note that each memory controller
+ may have two component regions -- base and extended -- so
+ this information cannot be deduced from the dma-ranges.
+ $ref: /schemas/types.yaml#/definitions/uint64-array
+ items:
+ minItems: 1
+ maxItems: 3
+
required:
- reg
+ - ranges
- dma-ranges
- "#interrupt-cells"
- interrupts
@@ -68,6 +96,18 @@ required:
- interrupt-map
- msi-controller
+allOf:
+ - $ref: /schemas/pci/pci-bus.yaml#
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: brcm,bcm7216-pcie
+ then:
+ required:
+ - resets
+ - reset-names
+
unevaluatedProperties: false
examples:
@@ -93,7 +133,9 @@ examples:
msi-parent = <&pcie0>;
msi-controller;
ranges = <0x02000000 0x0 0xf8000000 0x6 0x00000000 0x0 0x04000000>;
- dma-ranges = <0x02000000 0x0 0x00000000 0x0 0x00000000 0x0 0x80000000>;
+ dma-ranges = <0x42000000 0x1 0x00000000 0x0 0x40000000 0x0 0x80000000>,
+ <0x42000000 0x1 0x80000000 0x3 0x00000000 0x0 0x80000000>;
brcm,enable-ssc;
+ brcm,scb-sizes = <0x0000000080000000 0x0000000080000000>;
};
};
--
2.17.1
Powered by blists - more mailing lists