| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20200616215435.987899-4-lkundrak@v3.sk>
Date: Tue, 16 Jun 2020 23:54:35 +0200
From: Lubomir Rintel <lkundrak@...sk>
To: Kishon Vijay Abraham I <kishon@...com>
Cc: Rob Herring <robh+dt@...nel.org>, linux-kernel@...r.kernel.org,
devicetree@...r.kernel.org, Lubomir Rintel <lkundrak@...sk>
Subject: [PATCH v3 3/3] phy: Add USB HSIC PHY driver for Marvell MMP3 SoC
Add PHY driver for the HSICs found on Marvell MMP3 SoC. The driver is
rather straightforward -- the PHY essentially just needs to be enabled.
Signed-off-by: Lubomir Rintel <lkundrak@...sk>
---
Changes since v1:
- Explicitely cast drvdata pointer to make sparse happy
drivers/phy/marvell/Kconfig | 12 +++++
drivers/phy/marvell/Makefile | 1 +
drivers/phy/marvell/phy-mmp3-hsic.c | 82 +++++++++++++++++++++++++++++
3 files changed, 95 insertions(+)
create mode 100644 drivers/phy/marvell/phy-mmp3-hsic.c
diff --git a/drivers/phy/marvell/Kconfig b/drivers/phy/marvell/Kconfig
index 8f6273c837ec3..6c96f2bf52665 100644
--- a/drivers/phy/marvell/Kconfig
+++ b/drivers/phy/marvell/Kconfig
@@ -116,3 +116,15 @@ config PHY_MMP3_USB
The PHY driver will be used by Marvell udc/ehci/otg driver.
To compile this driver as a module, choose M here.
+
+config PHY_MMP3_HSIC
+ tristate "Marvell MMP3 USB HSIC PHY Driver"
+ depends on MACH_MMP3_DT || COMPILE_TEST
+ select GENERIC_PHY
+ help
+ Enable this to support Marvell MMP3 USB HSIC PHY driver for
+ Marvell MMP3 SoC. This driver will be used my the Marvell EHCI
+ driver to initialize the interface to internal USB HSIC
+ components on MMP3-based boards.
+
+ To compile this driver as a module, choose M here.
diff --git a/drivers/phy/marvell/Makefile b/drivers/phy/marvell/Makefile
index 5a106b1549f41..7f296ef028292 100644
--- a/drivers/phy/marvell/Makefile
+++ b/drivers/phy/marvell/Makefile
@@ -3,6 +3,7 @@ obj-$(CONFIG_ARMADA375_USBCLUSTER_PHY) += phy-armada375-usb2.o
obj-$(CONFIG_PHY_BERLIN_SATA) += phy-berlin-sata.o
obj-$(CONFIG_PHY_BERLIN_USB) += phy-berlin-usb.o
obj-$(CONFIG_PHY_MMP3_USB) += phy-mmp3-usb.o
+obj-$(CONFIG_PHY_MMP3_HSIC) += phy-mmp3-hsic.o
obj-$(CONFIG_PHY_MVEBU_A3700_COMPHY) += phy-mvebu-a3700-comphy.o
obj-$(CONFIG_PHY_MVEBU_A3700_UTMI) += phy-mvebu-a3700-utmi.o
obj-$(CONFIG_PHY_MVEBU_A38X_COMPHY) += phy-armada38x-comphy.o
diff --git a/drivers/phy/marvell/phy-mmp3-hsic.c b/drivers/phy/marvell/phy-mmp3-hsic.c
new file mode 100644
index 0000000000000..47c1e8894939f
--- /dev/null
+++ b/drivers/phy/marvell/phy-mmp3-hsic.c
@@ -0,0 +1,82 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2020 Lubomir Rintel <lkundrak@...sk>
+ */
+
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+
+#define HSIC_CTRL 0x08
+#define HSIC_ENABLE BIT(7)
+#define PLL_BYPASS BIT(4)
+
+static int mmp3_hsic_phy_init(struct phy *phy)
+{
+ void __iomem *base = (void __iomem *)phy_get_drvdata(phy);
+ u32 hsic_ctrl;
+
+ hsic_ctrl = readl_relaxed(base + HSIC_CTRL);
+ hsic_ctrl |= HSIC_ENABLE;
+ hsic_ctrl |= PLL_BYPASS;
+ writel_relaxed(hsic_ctrl, base + HSIC_CTRL);
+
+ return 0;
+}
+
+static const struct phy_ops mmp3_hsic_phy_ops = {
+ .init = mmp3_hsic_phy_init,
+ .owner = THIS_MODULE,
+};
+
+static const struct of_device_id mmp3_hsic_phy_of_match[] = {
+ { .compatible = "marvell,mmp3-hsic-phy", },
+ { },
+};
+MODULE_DEVICE_TABLE(of, mmp3_hsic_phy_of_match);
+
+static int mmp3_hsic_phy_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct phy_provider *provider;
+ struct resource *resource;
+ void __iomem *base;
+ struct phy *phy;
+
+ resource = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ base = devm_ioremap_resource(dev, resource);
+ if (IS_ERR(base)) {
+ dev_err(dev, "failed to remap PHY regs\n");
+ return PTR_ERR(base);
+ }
+
+ phy = devm_phy_create(dev, NULL, &mmp3_hsic_phy_ops);
+ if (IS_ERR(phy)) {
+ dev_err(dev, "failed to create PHY\n");
+ return PTR_ERR(phy);
+ }
+
+ phy_set_drvdata(phy, (void *)base);
+ provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+ if (IS_ERR(provider)) {
+ dev_err(dev, "failed to register PHY provider\n");
+ return PTR_ERR(provider);
+ }
+
+ return 0;
+}
+
+static struct platform_driver mmp3_hsic_phy_driver = {
+ .probe = mmp3_hsic_phy_probe,
+ .driver = {
+ .name = "mmp3-hsic-phy",
+ .of_match_table = mmp3_hsic_phy_of_match,
+ },
+};
+module_platform_driver(mmp3_hsic_phy_driver);
+
+MODULE_AUTHOR("Lubomir Rintel <lkundrak@...sk>");
+MODULE_DESCRIPTION("Marvell MMP3 USB HSIC PHY Driver");
+MODULE_LICENSE("GPL");
--
2.26.2
Powered by blists - more mailing lists