[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20200617182229.164675-1-helen.koike@collabora.com>
Date: Wed, 17 Jun 2020 15:22:29 -0300
From: Helen Koike <helen.koike@...labora.com>
To: linux-media@...r.kernel.org
Cc: mchehab@...nel.org, dafna.hirschfeld@...labora.com,
linux-kernel@...r.kernel.org, tfiga@...gle.com,
hans.verkuil@...co.com, kernel@...labora.com,
Helen Koike <helen.koike@...labora.com>,
Wojciech Zabolotny <wzab01@...il.com>
Subject: [PATCH] media: staging: rkisp1: isp: check return value from phy_*
When starting streaming, do not ignore return value from phy_set_mode(),
phy_configure() and phy_power_on().
If it fails, return error to the user.
Fixes: d65dd85281fb ("media: staging: rkisp1: add Rockchip ISP1 base driver")
Reported-by: Wojciech Zabolotny <wzab01@...il.com>
Signed-off-by: Helen Koike <helen.koike@...labora.com>
---
drivers/staging/media/rkisp1/rkisp1-isp.c | 22 +++++++++++++++++++---
1 file changed, 19 insertions(+), 3 deletions(-)
diff --git a/drivers/staging/media/rkisp1/rkisp1-isp.c b/drivers/staging/media/rkisp1/rkisp1-isp.c
index dc2b59a0160a8..531047fc34a01 100644
--- a/drivers/staging/media/rkisp1/rkisp1-isp.c
+++ b/drivers/staging/media/rkisp1/rkisp1-isp.c
@@ -892,6 +892,7 @@ static int rkisp1_mipi_csi2_start(struct rkisp1_isp *isp,
union phy_configure_opts opts;
struct phy_configure_opts_mipi_dphy *cfg = &opts.mipi_dphy;
s64 pixel_clock;
+ int ret;
if (!sensor->pixel_rate_ctrl) {
dev_warn(sensor->sd->dev, "No pixel rate control in subdev\n");
@@ -906,9 +907,24 @@ static int rkisp1_mipi_csi2_start(struct rkisp1_isp *isp,
phy_mipi_dphy_get_default_config(pixel_clock, isp->sink_fmt->bus_width,
sensor->lanes, cfg);
- phy_set_mode(sensor->dphy, PHY_MODE_MIPI_DPHY);
- phy_configure(sensor->dphy, &opts);
- phy_power_on(sensor->dphy);
+
+ ret = phy_set_mode(sensor->dphy, PHY_MODE_MIPI_DPHY);
+ if (ret) {
+ dev_err(sensor->sd->dev, "Fail setting MIPI DPHY mode\n");
+ return -EINVAL;
+ }
+
+ ret = phy_configure(sensor->dphy, &opts);
+ if (ret && ret != -EOPNOTSUPP) {
+ dev_err(sensor->sd->dev, "Fail configuring MIPI DPHY\n");
+ return -EINVAL;
+ }
+
+ ret = phy_power_on(sensor->dphy);
+ if (ret) {
+ dev_err(sensor->sd->dev, "Fail powering on MIPI DPHY\n");
+ return -EINVAL;
+ }
return 0;
}
--
2.26.0
Powered by blists - more mailing lists