[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <4efcd835-e4e2-ddfa-d0f8-9f29f574eb9e@ti.com>
Date: Wed, 17 Jun 2020 13:27:08 -0500
From: Dan Murphy <dmurphy@...com>
To: <andrew@...n.ch>, <f.fainelli@...il.com>, <hkallweit1@...il.com>,
<davem@...emloft.net>, <robh@...nel.org>
CC: <netdev@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<devicetree@...r.kernel.org>
Subject: Re: [PATCH net-next v7 6/6] net: phy: DP83822: Add ability to
advertise Fiber connection
All
On 6/17/20 1:20 PM, Dan Murphy wrote:
> The DP83822 can be configured to use the RGMII interface. There are
> independent fixed 3.5ns clock shift (aka internal delay) for the TX and RX
> paths. This allow either one to be set if the MII interface is RGMII and
> the value is set in the firmware node.
$subject is wrong. I used the 83822 fiber patch as my base as it had
90% of the work done that I needed for the
internal delay. I will fix it in v8 after review comments.
Dan
Powered by blists - more mailing lists