| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20200617211541.GB2811091@bogus>
Date: Wed, 17 Jun 2020 15:15:41 -0600
From: Rob Herring <robh@...nel.org>
To: Yifeng Zhao <yifeng.zhao@...k-chips.com>
Cc: miquel.raynal@...tlin.com, richard@....at, vigneshr@...com,
devicetree@...r.kernel.org, linux-mtd@...ts.infradead.org,
heiko@...ech.de, linux-rockchip@...ts.infradead.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v6 1/8] dt-bindings: mtd: Describe Rockchip RK3xxx NAND
flash controller
On Tue, Jun 09, 2020 at 03:40:18PM +0800, Yifeng Zhao wrote:
> Documentation support for Rockchip RK3xxx NAND flash controllers
>
> Signed-off-by: Yifeng Zhao <yifeng.zhao@...k-chips.com>
> ---
>
> Changes in v6:
> - Fix some wrong define
> - Modified the definition of compatible
>
> Changes in v5:
> - Fix some wrong define
> - Add boot-medium define
> - Remove some compatible define
>
> Changes in v4:
> - The compatible define with rkxx_nfc
> - Add assigned-clocks
> - Fix some wrong define
>
> Changes in v3:
> - Change the title for the dt-bindings
>
> Changes in v2: None
>
> .../mtd/rockchip,nand-controller.yaml | 154 ++++++++++++++++++
> 1 file changed, 154 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/mtd/rockchip,nand-controller.yaml
>
> diff --git a/Documentation/devicetree/bindings/mtd/rockchip,nand-controller.yaml b/Documentation/devicetree/bindings/mtd/rockchip,nand-controller.yaml
> new file mode 100644
> index 000000000000..f753fe8248aa
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mtd/rockchip,nand-controller.yaml
> @@ -0,0 +1,154 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/mtd/rockchip,nand-controller.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Rockchip SoCs NAND FLASH Controller (NFC)
> +
> +allOf:
> + - $ref: "nand-controller.yaml#"
> +
> +maintainers:
> + - Heiko Stuebner <heiko@...ech.de>
> +
> +properties:
> + compatible:
> + oneOf:
> + - const: rockchip,px30-nfc
> + - const: rockchip,rk2928-nfc
> + - const: rockchip,rv1108-nfc
> + - items:
> + - const: rockchip,rk3326-nfc
> + - const: rockchip,px30-nfc
> + - items:
> + - const: rockchip,rk3036-nfc
> + - const: rockchip,rk2928-nfc
> + - items:
> + - const: rockchip,rk3308-nfc
> + - const: rockchip,rv1108-nfc
> +
> + reg:
> + maxItems: 1
> +
> + interrupts:
> + maxItems: 1
> +
> + clocks:
> + minItems: 1
> + items:
> + - description: Bus Clock
> + - description: Module Clock
> +
> + clock-names:
> + minItems: 1
> + items:
> + - const: ahb
> + - const: nfc
> +
> + assigned-clocks:
> + maxItems: 1
> +
> + assigned-clock-rates:
> + maxItems: 1
> +
> + pinctrl-0:
> + maxItems: 1
> +
> + pinctrl-names:
> + const: default
> +
> + power-domains:
> + maxItems: 1
> +
> +patternProperties:
> + "^nand@[a-f0-9]$":
> + type: object
> + properties:
> + reg:
> + minimum: 0
> + maximum: 7
> +
> + nand-ecc-mode:
> + const: hw
> +
> + nand-ecc-step-size:
> + const: 1024
> +
> + nand-ecc-strength:
> + enum: [16, 24, 40, 60, 70]
> + description:
This needs a '|' at the end if you want the below line breaks preserved.
> + The ECC configurations that can be supported are as follows.
> + - NFCv900(PX30 and RK3326) support ecc strength 16, 40, 60 and 70.
> + - NFCv600(RK3066 and RK2928) support ecc strength 16, 24, 40 and 60.
> + - NFCv622(RK3036 and RK3128) support ecc strength 16, 24, 40 and 60.
> + - NFCv800(RK3308 and RV1108) support ecc strength 16.
> +
> + nand-bus-width:
> + const: 8
> +
> + rockchip,boot-blks:
> + minimum: 2
> + default: 16
> + allOf:
> + - $ref: /schemas/types.yaml#/definitions/uint32
> + description:
> + The NFC driver need this information to select ECC
> + algorithms supported by the BOOTROM.
> + Only used in combination with 'nand-is-boot-medium'.
> +
> + rockchip,boot-ecc-strength:
> + enum: [16, 24, 40, 60, 70]
> + allOf:
> + - $ref: /schemas/types.yaml#/definitions/uint32
> + description:
> + If specified it indicates that a different BCH/ECC setting is
> + supported by the BOOTROM.
> + - NFCv900(PX30 and RK3326) support ecc strength 16 and 70.
> + - NFCv600(RK3066 and RK2928) support ecc strength 16, 24, 40 and 60.
> + - NFCv622(RK3036 and RK3128) support ecc strength 16, 24, 40 and 60.
> + - NFCv800(RK3308 and RV1108) support ecc strength 16.
> + Only used in combination with 'nand-is-boot-medium'.
> +
> +required:
> + - compatible
> + - reg
> + - interrupts
> + - clocks
> + - clock-names
> +
> +examples:
> + - |
> + #include <dt-bindings/clock/rk3308-cru.h>
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + nfc: nand-controller@...b0000 {
> + compatible = "rockchip,rk3308-nfc",
> + "rockchip,rv1108-nfc";
> + reg = <0x0 0xff4b0000 0x0 0x4000>;
> + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cru HCLK_NANDC>, <&cru SCLK_NANDC>;
> + clock-names = "ahb", "nfc";
> + assigned-clocks = <&clks SCLK_NANDC>;
> + assigned-clock-rates = <150000000>;
> +
> + pinctrl-0 = <&flash_ale &flash_bus8 &flash_cle &flash_csn0
> + &flash_rdn &flash_rdy &flash_wrn>;
> + pinctrl-names = "default";
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + nand@0 {
> + reg = <0>;
> + label = "rk-nand";
> + nand-bus-width = <8>;
> + nand-ecc-mode = "hw";
> + nand-ecc-step-size = <1024>;
> + nand-ecc-strength = <16>;
> + nand-is-boot-medium;
> + rockchip,boot-blks = <8>;
> + rockchip,boot-ecc-strength = <16>;
> + };
> + };
> +
> +...
> --
> 2.17.1
>
>
>
Powered by blists - more mailing lists