[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <8fc5c06f-ee0f-f907-6631-05b45b89c7da@gmail.com>
Date: Thu, 18 Jun 2020 00:48:21 +0300
From: Dmitry Osipenko <digetx@...il.com>
To: Rob Herring <robh@...nel.org>
Cc: Thierry Reding <thierry.reding@...il.com>,
Jonathan Hunter <jonathanh@...dia.com>,
Georgi Djakov <georgi.djakov@...aro.org>,
Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...nel.org>,
Peter De Schrijver <pdeschrijver@...dia.com>,
MyungJoo Ham <myungjoo.ham@...sung.com>,
Kyungmin Park <kyungmin.park@...sung.com>,
Chanwoo Choi <cw00.choi@...sung.com>,
Mikko Perttunen <cyndis@...si.fi>,
Artur Świgoń <a.swigon@...sung.com>,
linux-tegra@...r.kernel.org, linux-pm@...r.kernel.org,
linux-kernel@...r.kernel.org, dri-devel@...ts.freedesktop.org,
devicetree@...r.kernel.org
Subject: Re: [PATCH v4 22/37] dt-bindings: host1x: Document new interconnect
properties
18.06.2020 00:44, Dmitry Osipenko пишет:
> 18.06.2020 00:37, Rob Herring пишет:
>> On Tue, Jun 09, 2020 at 04:13:49PM +0300, Dmitry Osipenko wrote:
>>> Most of Host1x devices have at least one memory client. These clients
>>> are directly connected to the memory controller. The new interconnect
>>> properties represent the memory client's connection to the memory
>>> controller.
>>>
>>> Signed-off-by: Dmitry Osipenko <digetx@...il.com>
>>> ---
>>> .../display/tegra/nvidia,tegra20-host1x.txt | 68 +++++++++++++++++++
>>> 1 file changed, 68 insertions(+)
>>>
>>> diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt
>>> index 47319214b5f6..ab4fbee7bccf 100644
>>> --- a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt
>>> +++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt
>>> @@ -20,6 +20,10 @@ Required properties:
>>> - reset-names: Must include the following entries:
>>> - host1x
>>>
>>> +Each host1x client module having to perform DMA through the Memory Controller
>>> +should have the interconnect endpoints set to the Memory Client and External
>>> +Memory respectively.
>>> +
>>> The host1x top-level node defines a number of children, each representing one
>>> of the following host1x client modules:
>>>
>>> @@ -36,6 +40,12 @@ of the following host1x client modules:
>>> - reset-names: Must include the following entries:
>>> - mpe
>>>
>>> + Optional properties:
>>> + - interconnects: Must contain entry for the MPE memory clients.
>>> + - interconnect-names: Must include name of the interconnect path for each
>>> + interconnect entry. Consult TRM documentation for information about
>>> + available memory clients, see MEMORY CONTROLLER section.
>>> +
>>> - vi: video input
>>>
>>> Required properties:
>>> @@ -65,6 +75,12 @@ of the following host1x client modules:
>>> - power-domains: Must include sor powergate node as csicil is in
>>> SOR partition.
>>>
>>> + Optional properties:
>>> + - interconnects: Must contain entry for the VI memory clients.
>>> + - interconnect-names: Must include name of the interconnect path for each
>>> + interconnect entry. Consult TRM documentation for information about
>>> + available memory clients, see MEMORY CONTROLLER section.
>>> +
>>> - epp: encoder pre-processor
>>>
>>> Required properties:
>>> @@ -78,6 +94,12 @@ of the following host1x client modules:
>>> - reset-names: Must include the following entries:
>>> - epp
>>>
>>> + Optional properties:
>>> + - interconnects: Must contain entry for the EPP memory clients.
>>> + - interconnect-names: Must include name of the interconnect path for each
>>> + interconnect entry. Consult TRM documentation for information about
>>> + available memory clients, see MEMORY CONTROLLER section.
>>> +
>>> - isp: image signal processor
>>>
>>> Required properties:
>>> @@ -91,6 +113,12 @@ of the following host1x client modules:
>>> - reset-names: Must include the following entries:
>>> - isp
>>>
>>> + Optional properties:
>>> + - interconnects: Must contain entry for the ISP memory clients.
>>> + - interconnect-names: Must include name of the interconnect path for each
>>> + interconnect entry. Consult TRM documentation for information about
>>> + available memory clients, see MEMORY CONTROLLER section.
>>> +
>>> - gr2d: 2D graphics engine
>>>
>>> Required properties:
>>> @@ -104,6 +132,12 @@ of the following host1x client modules:
>>> - reset-names: Must include the following entries:
>>> - 2d
>>>
>>> + Optional properties:
>>> + - interconnects: Must contain entry for the GR2D memory clients.
>>> + - interconnect-names: Must include name of the interconnect path for each
>>> + interconnect entry. Consult TRM documentation for information about
>>> + available memory clients, see MEMORY CONTROLLER section.
>>> +
>>> - gr3d: 3D graphics engine
>>>
>>> Required properties:
>>> @@ -122,6 +156,12 @@ of the following host1x client modules:
>>> - 3d
>>> - 3d2 (Only required on SoCs with two 3D clocks)
>>>
>>> + Optional properties:
>>> + - interconnects: Must contain entry for the GR3D memory clients.
>>> + - interconnect-names: Must include name of the interconnect path for each
>>> + interconnect entry. Consult TRM documentation for information about
>>> + available memory clients, see MEMORY CONTROLLER section.
>>> +
>>> - dc: display controller
>>>
>>> Required properties:
>>> @@ -149,6 +189,10 @@ of the following host1x client modules:
>>> - nvidia,hpd-gpio: specifies a GPIO used for hotplug detection
>>> - nvidia,edid: supplies a binary EDID blob
>>> - nvidia,panel: phandle of a display panel
>>> + - interconnects: Must contain entry for the DC memory clients.
>>> + - interconnect-names: Must include name of the interconnect path for each
>>> + interconnect entry. Consult TRM documentation for information about
>>> + available memory clients, see MEMORY CONTROLLER section.
>>>
>>> - hdmi: High Definition Multimedia Interface
>>>
>>> @@ -297,6 +341,12 @@ of the following host1x client modules:
>>> - reset-names: Must include the following entries:
>>> - vic
>>>
>>> + Optional properties:
>>> + - interconnects: Must contain entry for the VIC memory clients.
>>> + - interconnect-names: Must include name of the interconnect path for each
>>> + interconnect entry. Consult TRM documentation for information about
>>> + available memory clients, see MEMORY CONTROLLER section.
>>> +
>>> Example:
>>>
>>> / {
>>> @@ -410,6 +460,15 @@ Example:
>>> resets = <&tegra_car 27>;
>>> reset-names = "dc";
>>>
>>> + interconnects = <&mc TEGRA20_MC_DISPLAY0A &emc>,
>>> + <&mc TEGRA20_MC_DISPLAY0B &emc>,
>>> + <&mc TEGRA20_MC_DISPLAY0C &emc>,
>>> + <&mc TEGRA20_MC_DISPLAY1B &emc>;
>>
>> This looks odd or wrong. Each entry has 2 phandles?
>
> Each entry defines interconnect path, where MC is the start of the path
> and EMC is the end. So yes, 2 phandles for each path.
>
> Please see arm/boot/dts/qcom-msm8974.dtsi for another example [1].
>
> [1]
> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arch/arm/boot/dts/qcom-msm8974.dtsi?h=v5.8-rc1#n1448
>
Actually, there are even better examples:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arch/arm64/boot/dts/qcom/sc7180.dtsi?h=v5.8-rc1#n1044
Powered by blists - more mailing lists