[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20200617224813.23853-3-Sergey.Semin@baikalelectronics.ru>
Date: Thu, 18 Jun 2020 01:48:12 +0300
From: Serge Semin <Sergey.Semin@...kalelectronics.ru>
To: Thomas Bogendoerfer <tsbogend@...ha.franken.de>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Jiri Slaby <jslaby@...e.com>,
Andy Shevchenko <andriy.shevchenko@...ux.intel.com>
CC: Serge Semin <Sergey.Semin@...kalelectronics.ru>,
Serge Semin <fancer.lancer@...il.com>,
Alexey Malahov <Alexey.Malahov@...kalelectronics.ru>,
Arnd Bergmann <arnd@...db.de>,
Maxime Ripard <mripard@...nel.org>,
Will Deacon <will@...nel.org>,
Russell King <linux@...linux.org.uk>,
<linux-mips@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-serial@...r.kernel.org>, <linux-kernel@...r.kernel.org>
Subject: [PATCH v6 2/3] serial: 8250_dw: Simplify the ref clock rate setting procedure
Really instead of twice checking the clk_round_rate() return value
we could do it once, and if it isn't error the clock rate can be changed.
By doing so we decrease a number of ret-value tests and remove a weird
goto-based construction implemented in the dw8250_set_termios() method.
Signed-off-by: Serge Semin <Sergey.Semin@...kalelectronics.ru>
Cc: Alexey Malahov <Alexey.Malahov@...kalelectronics.ru>
Cc: Thomas Bogendoerfer <tsbogend@...ha.franken.de>
Cc: Arnd Bergmann <arnd@...db.de>
Cc: Andy Shevchenko <andriy.shevchenko@...ux.intel.com>
Cc: Maxime Ripard <mripard@...nel.org>
Cc: Will Deacon <will@...nel.org>
Cc: Russell King <linux@...linux.org.uk>
Cc: linux-mips@...r.kernel.org
Cc: linux-arm-kernel@...ts.infradead.org
---
Changelog v3:
- This is a new patch.
---
drivers/tty/serial/8250/8250_dw.c | 15 ++++-----------
1 file changed, 4 insertions(+), 11 deletions(-)
diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c
index aab3cccc6789..12866083731d 100644
--- a/drivers/tty/serial/8250/8250_dw.c
+++ b/drivers/tty/serial/8250/8250_dw.c
@@ -282,20 +282,13 @@ static void dw8250_set_termios(struct uart_port *p, struct ktermios *termios,
clk_disable_unprepare(d->clk);
rate = clk_round_rate(d->clk, baud * 16);
- if (rate < 0)
- ret = rate;
- else if (rate == 0)
- ret = -ENOENT;
- else
+ if (rate > 0) {
ret = clk_set_rate(d->clk, rate);
+ if (!ret)
+ p->uartclk = rate;
+ }
clk_prepare_enable(d->clk);
- if (ret)
- goto out;
-
- p->uartclk = rate;
-
-out:
p->status &= ~UPSTAT_AUTOCTS;
if (termios->c_cflag & CRTSCTS)
p->status |= UPSTAT_AUTOCTS;
--
2.26.2
Powered by blists - more mailing lists