[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20200617035818.54110-1-vadivel.muruganx.ramuthevar@linux.intel.com>
Date: Wed, 17 Jun 2020 11:58:16 +0800
From: "Ramuthevar,Vadivel MuruganX"
<vadivel.muruganx.ramuthevar@...ux.intel.com>
To: linux-kernel@...r.kernel.org, balbi@...nel.org, robh@...nel.org,
p.zabel@...gutronix.de
Cc: gregkh@...uxfoundation.org, devicetree@...r.kernel.org,
linux-usb@...r.kernel.org, cheol.yong.kim@...el.com,
qi-ming.wu@...el.com, yin1.li@...el.com,
andriy.shevchenko@...el.com,
"Ramuthevar,Vadivel MuruganX"
<vadivel.muruganx.ramuthevar@...ux.intel.com>
Subject: [PATCH v4 0/2]usb : phy: Add USB PHY support on Intel LGM SoC
The USB PHY provides the optimized for low power dissipation while active, idle, or on standby.
Requires minimal external components, a single resistor, for best operation.
Supports 10/5-Gbps high-speed data transmission rates through 3-m USB 3.x cable
---
v4:
- Andy's review comments addressed
- drop the excess error debug prints
- error check optimized
- merge the split line to one line
v3:
- Andy's review comments update
- hardcode return value changed to actual return value from the callee
- add error check is fixed according to the above
- correct the assignment in redundant
- combine the split line into one line
v2:
- Address Phillip's review comments
- replace devm_reset_control_get() by devm_reset_control_get_exclusive()
- re-design the assert and deassert fucntion calls as per review comments
- address kbuild bot warnings
- add the comments
v1:
- initial version
---
dt-bindings: usb: Add USB PHY support for Intel LGM SoC
v4:
- No Change
v3:
- No Change
v2:
- No Change
v1:
- initial version
Ramuthevar Vadivel Murugan (2):
dt-bindings: usb: Add USB PHY support for Intel LGM SoC
usb: phy: Add USB3 PHY support for Intel LGM SoC
.../devicetree/bindings/usb/intel,lgm-usb-phy.yaml | 53 ++++
drivers/usb/phy/Kconfig | 11 +
drivers/usb/phy/Makefile | 1 +
drivers/usb/phy/phy-lgm-usb.c | 275 +++++++++++++++++++++
4 files changed, 340 insertions(+)
create mode 100644 Documentation/devicetree/bindings/usb/intel,lgm-usb-phy.yaml
create mode 100644 drivers/usb/phy/phy-lgm-usb.c
--
2.11.0
Powered by blists - more mailing lists