linux-kernel - [PATCH v7 2/2] media: rcar-csi2: Add warning for PHY speed less than minimum

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <1592369843-32217-2-git-send-email-sudipi@jp.adit-jv.com>
Date:   Wed, 17 Jun 2020 13:57:23 +0900
From:   Suresh Udipi <sudipi@...adit-jv.com>
To:     <niklas.soderlund@...natech.se>
CC:     <akiyama@...-osk.co.jp>, <efriedrich@...adit-jv.com>,
        <erosca@...adit-jv.com>, <linux-kernel@...r.kernel.org>,
        <linux-media@...r.kernel.org>, <linux-renesas-soc@...r.kernel.org>,
        <mchehab@...nel.org>, <michael@...in.online>,
        <mrodin@...adit-jv.com>, <securitycheck@...so.co.jp>,
        <sudipi@...adit-jv.com>
Subject: [PATCH v7 2/2] media: rcar-csi2: Add warning for PHY speed less than minimum

Add a warning message when the selected PHY speed is less
than supported minimum PHY speed given in the hsfreq table[1].

For raspberry pi camera capture on Kingfisher board with resolution
640x480, the calculated PHY speed is 48 mbps which is less than
the minimum PHY speed 80 Mbps from the table[1]. But in this cases
capture is successful.

[1] specs r19uh0105ej0200-r-car-3rd-generation.pdf [Table 25.9]

Signed-off-by: Suresh Udipi <sudipi@...adit-jv.com>
Signed-off-by: Michael Rodin <mrodin@...adit-jv.com>
---
 drivers/media/platform/rcar-vin/rcar-csi2.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/media/platform/rcar-vin/rcar-csi2.c b/drivers/media/platform/rcar-vin/rcar-csi2.c
index f18dedc..1184527 100644
--- a/drivers/media/platform/rcar-vin/rcar-csi2.c
+++ b/drivers/media/platform/rcar-vin/rcar-csi2.c
@@ -433,6 +433,10 @@ static int rcsi2_set_phypll(struct rcar_csi2 *priv, unsigned int mbps)
 	const struct rcsi2_mbps_reg *hsfreq;
 	const struct rcsi2_mbps_reg *hsfreq_prev = NULL;
 
+	if (mbps < priv->info->hsfreqrange->mbps)
+		dev_warn(priv->dev, "%u Mbps less than min PHY speed %u Mbps",
+			 mbps, priv->info->hsfreqrange->mbps);
+
 	for (hsfreq = priv->info->hsfreqrange; hsfreq->mbps != 0; hsfreq++) {
 		if (hsfreq->mbps >= mbps)
 			break;
-- 
2.7.4