linux-kernel - [PATCH] serial: samsung: Minor whitespace cleanups

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [day] [month] [year] [list]
Message-Id: <20200617152856.18086-1-krzk@kernel.org>
Date:   Wed, 17 Jun 2020 17:28:56 +0200
From:   Krzysztof Kozlowski <krzk@...nel.org>
To:     Kukjin Kim <kgene@...nel.org>,
        Krzysztof Kozlowski <krzk@...nel.org>,
        Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        Jiri Slaby <jslaby@...e.com>,
        linux-arm-kernel@...ts.infradead.org,
        linux-samsung-soc@...r.kernel.org, linux-serial@...r.kernel.org,
        linux-kernel@...r.kernel.org
Subject: [PATCH] serial: samsung: Minor whitespace cleanups

Make the code slightly more readable by removing unneeded line breaks,
adding missing line breaks and white spaces.  This also fixes few strict
checkpatch suggestions:

	CHECK: spaces preferred around that '-' (ctx:VxV)
	CHECK: Unbalanced braces around else statement
	CHECK: Lines should not end with a '('

Signed-off-by: Krzysztof Kozlowski <krzk@...nel.org>
---
 drivers/tty/serial/samsung_tty.c | 22 +++++++++-------------
 1 file changed, 9 insertions(+), 13 deletions(-)

diff --git a/drivers/tty/serial/samsung_tty.c b/drivers/tty/serial/samsung_tty.c
index d913d9b2762a..7be9579216b8 100644
--- a/drivers/tty/serial/samsung_tty.c
+++ b/drivers/tty/serial/samsung_tty.c
@@ -327,7 +327,6 @@ static void s3c24xx_serial_tx_dma_complete(void *args)
 	unsigned long flags;
 	int count;
 
-
 	dmaengine_tx_status(dma->tx_chan, dma->tx_cookie, &state);
 	count = dma->tx_bytes_requested - state.residue;
 	async_tx_ack(dma->tx_desc);
@@ -409,7 +408,6 @@ static int s3c24xx_serial_start_tx_dma(struct s3c24xx_uart_port *ourport,
 	struct circ_buf *xmit = &port->state->xmit;
 	struct s3c24xx_uart_dma *dma = ourport->dma;
 
-
 	if (ourport->tx_mode != S3C24XX_TX_DMA)
 		enable_tx_dma(ourport);
 
@@ -816,7 +814,6 @@ static irqreturn_t s3c24xx_serial_rx_chars_pio(void *dev_id)
 	return IRQ_HANDLED;
 }
 
-
 static irqreturn_t s3c24xx_serial_rx_chars(int irq, void *dev_id)
 {
 	struct s3c24xx_uart_port *ourport = dev_id;
@@ -842,8 +839,8 @@ static irqreturn_t s3c24xx_serial_tx_chars(int irq, void *id)
 	    count >= ourport->min_dma_size) {
 		int align = dma_get_cache_alignment() -
 			(xmit->tail & (dma_get_cache_alignment() - 1));
-		if (count-align >= ourport->min_dma_size) {
-			dma_count = count-align;
+		if (count - align >= ourport->min_dma_size) {
+			dma_count = count - align;
 			count = align;
 		}
 	}
@@ -1589,7 +1586,6 @@ s3c24xx_serial_verify_port(struct uart_port *port, struct serial_struct *ser)
 	return 0;
 }
 
-
 #ifdef CONFIG_SERIAL_SAMSUNG_CONSOLE
 
 static struct console s3c24xx_serial_console;
@@ -1672,7 +1668,6 @@ s3c24xx_serial_ports[CONFIG_SERIAL_SAMSUNG_UARTS] = {
 		}
 	},
 #if CONFIG_SERIAL_SAMSUNG_UARTS > 2
-
 	[2] = {
 		.port = {
 			.lock		= __PORT_LOCK_UNLOCKED(2),
@@ -1728,7 +1723,6 @@ static void s3c24xx_serial_resetport(struct uart_port *port,
 	udelay(1);
 }
 
-
 #ifdef CONFIG_ARM_S3C24XX_CPUFREQ
 
 static int s3c24xx_serial_cpufreq_transition(struct notifier_block *nb,
@@ -1903,9 +1897,9 @@ static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport,
 
 	port->mapbase = res->start;
 	ret = platform_get_irq(platdev, 0);
-	if (ret < 0)
+	if (ret < 0) {
 		port->irq = 0;
-	else {
+	} else {
 		port->irq = ret;
 		ourport->rx_irq = ret;
 		ourport->tx_irq = ret + 1;
@@ -1977,8 +1971,8 @@ static const struct of_device_id s3c24xx_uart_dt_match[];
 
 static int probe_index;
 
-static inline struct s3c24xx_serial_drv_data *s3c24xx_get_driver_data(
-			struct platform_device *pdev)
+static inline struct s3c24xx_serial_drv_data *
+s3c24xx_get_driver_data(struct platform_device *pdev)
 {
 #ifdef CONFIG_OF
 	if (pdev->dev.of_node) {
@@ -2329,7 +2323,6 @@ s3c24xx_serial_get_options(struct uart_port *port, int *baud,
 		*baud = rate / (16 * (ubrdiv + 1));
 		dev_dbg(port->dev, "calculated baud %d\n", *baud);
 	}
-
 }
 
 static int __init
@@ -2696,6 +2689,7 @@ static int __init s3c2410_early_console_setup(struct earlycon_device *device,
 	device->port.private_data = &s3c2410_early_console_data;
 	return samsung_early_console_setup(device, opt);
 }
+
 OF_EARLYCON_DECLARE(s3c2410, "samsung,s3c2410-uart",
 			s3c2410_early_console_setup);
 
@@ -2710,6 +2704,7 @@ static int __init s3c2440_early_console_setup(struct earlycon_device *device,
 	device->port.private_data = &s3c2440_early_console_data;
 	return samsung_early_console_setup(device, opt);
 }
+
 OF_EARLYCON_DECLARE(s3c2412, "samsung,s3c2412-uart",
 			s3c2440_early_console_setup);
 OF_EARLYCON_DECLARE(s3c2440, "samsung,s3c2440-uart",
@@ -2728,6 +2723,7 @@ static int __init s5pv210_early_console_setup(struct earlycon_device *device,
 	device->port.private_data = &s5pv210_early_console_data;
 	return samsung_early_console_setup(device, opt);
 }
+
 OF_EARLYCON_DECLARE(s5pv210, "samsung,s5pv210-uart",
 			s5pv210_early_console_setup);
 OF_EARLYCON_DECLARE(exynos4210, "samsung,exynos4210-uart",
-- 
2.17.1