| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20200618010805.600873-50-sashal@kernel.org>
Date: Wed, 17 Jun 2020 21:02:27 -0400
From: Sasha Levin <sashal@...nel.org>
To: linux-kernel@...r.kernel.org, stable@...r.kernel.org
Cc: Andre Przywara <andre.przywara@....com>,
Sudeep Holla <sudeep.holla@....com>,
Sasha Levin <sashal@...nel.org>,
linux-arm-kernel@...ts.infradead.org, devicetree@...r.kernel.org
Subject: [PATCH AUTOSEL 5.7 050/388] arm64: dts: juno: Fix GIC child nodes
From: Andre Przywara <andre.przywara@....com>
[ Upstream commit a78aee9e434932a500db36cc6d88daeff3745e9f ]
The GIC DT nodes for the Juno boards were not fully compliant with
the DT binding, which has certain expectations about child nodes and
their size and address cells values.
Use smaller #address-cells and #size-cells values, as the binding
requests, and adjust the reg properties accordingly.
This requires adjusting the interrupt nexus nodes as well, as one
field of the interrupt-map property depends on the GIC's address-size.
Link: https://lore.kernel.org/r/20200513103016.130417-10-andre.przywara@arm.com
Signed-off-by: Andre Przywara <andre.przywara@....com>
Signed-off-by: Sudeep Holla <sudeep.holla@....com>
Signed-off-by: Sasha Levin <sashal@...nel.org>
---
arch/arm64/boot/dts/arm/juno-base.dtsi | 50 +++++++++++++-------------
1 file changed, 25 insertions(+), 25 deletions(-)
diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi
index f5889281545f..59b6ac0b828a 100644
--- a/arch/arm64/boot/dts/arm/juno-base.dtsi
+++ b/arch/arm64/boot/dts/arm/juno-base.dtsi
@@ -74,35 +74,35 @@ gic: interrupt-controller@...10000 {
<0x0 0x2c02f000 0 0x2000>,
<0x0 0x2c04f000 0 0x2000>,
<0x0 0x2c06f000 0 0x2000>;
- #address-cells = <2>;
+ #address-cells = <1>;
#interrupt-cells = <3>;
- #size-cells = <2>;
+ #size-cells = <1>;
interrupt-controller;
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_HIGH)>;
- ranges = <0 0 0 0x2c1c0000 0 0x40000>;
+ ranges = <0 0 0x2c1c0000 0x40000>;
v2m_0: v2m@0 {
compatible = "arm,gic-v2m-frame";
msi-controller;
- reg = <0 0 0 0x10000>;
+ reg = <0 0x10000>;
};
v2m@...00 {
compatible = "arm,gic-v2m-frame";
msi-controller;
- reg = <0 0x10000 0 0x10000>;
+ reg = <0x10000 0x10000>;
};
v2m@...00 {
compatible = "arm,gic-v2m-frame";
msi-controller;
- reg = <0 0x20000 0 0x10000>;
+ reg = <0x20000 0x10000>;
};
v2m@...00 {
compatible = "arm,gic-v2m-frame";
msi-controller;
- reg = <0 0x30000 0 0x10000>;
+ reg = <0x30000 0x10000>;
};
};
@@ -546,10 +546,10 @@ pcie_ctlr: pcie@...00000 {
<0x42000000 0x40 0x00000000 0x40 0x00000000 0x1 0x00000000>;
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 7>;
- interrupt-map = <0 0 0 1 &gic 0 0 GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 0 2 &gic 0 0 GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 0 3 &gic 0 0 GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 0 4 &gic 0 0 GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map = <0 0 0 1 &gic 0 GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 2 &gic 0 GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 3 &gic 0 GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 4 &gic 0 GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
msi-parent = <&v2m_0>;
status = "disabled";
iommu-map-mask = <0x0>; /* RC has no means to output PCI RID */
@@ -813,19 +813,19 @@ bus@...0000 {
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 15>;
- interrupt-map = <0 0 0 &gic 0 0 GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 1 &gic 0 0 GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 2 &gic 0 0 GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 3 &gic 0 0 GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 4 &gic 0 0 GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 5 &gic 0 0 GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 6 &gic 0 0 GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 7 &gic 0 0 GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 8 &gic 0 0 GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 9 &gic 0 0 GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 10 &gic 0 0 GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 11 &gic 0 0 GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 12 &gic 0 0 GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map = <0 0 0 &gic 0 GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 1 &gic 0 GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 2 &gic 0 GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 3 &gic 0 GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 4 &gic 0 GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 5 &gic 0 GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 6 &gic 0 GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 7 &gic 0 GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 8 &gic 0 GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 9 &gic 0 GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 10 &gic 0 GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 11 &gic 0 GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 12 &gic 0 GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
};
site2: tlx@...00000 {
@@ -835,6 +835,6 @@ site2: tlx@...00000 {
ranges = <0 0 0x60000000 0x10000000>;
#interrupt-cells = <1>;
interrupt-map-mask = <0 0>;
- interrupt-map = <0 0 &gic 0 0 GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map = <0 0 &gic 0 GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
};
};
--
2.25.1
Powered by blists - more mailing lists