| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20200618224413.1115849-1-robh@kernel.org>
Date: Thu, 18 Jun 2020 16:44:13 -0600
From: Rob Herring <robh@...nel.org>
To: devicetree@...r.kernel.org, dri-devel@...ts.freedesktop.org
Cc: linux-kernel@...r.kernel.org, Lee Jones <lee.jones@...aro.org>,
Daniel Thompson <daniel.thompson@...aro.org>,
Jingoo Han <jingoohan1@...il.com>
Subject: [PATCH] dt-bindings: backlight: Convert common backlight bindings to DT schema
Convert the common GPIO, LED, and PWM backlight bindings to DT schema
format.
Given there's only 2 common properties and the descriptions are slightly
different, I opted to not create a common backlight schema.
Cc: Lee Jones <lee.jones@...aro.org>
Cc: Daniel Thompson <daniel.thompson@...aro.org>
Cc: Jingoo Han <jingoohan1@...il.com>
Signed-off-by: Rob Herring <robh@...nel.org>
---
.../leds/backlight/gpio-backlight.txt | 16 ---
.../leds/backlight/gpio-backlight.yaml | 41 ++++++++
.../bindings/leds/backlight/led-backlight.txt | 28 ------
.../leds/backlight/led-backlight.yaml | 58 +++++++++++
.../bindings/leds/backlight/pwm-backlight.txt | 61 ------------
.../leds/backlight/pwm-backlight.yaml | 98 +++++++++++++++++++
6 files changed, 197 insertions(+), 105 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/leds/backlight/gpio-backlight.txt
create mode 100644 Documentation/devicetree/bindings/leds/backlight/gpio-backlight.yaml
delete mode 100644 Documentation/devicetree/bindings/leds/backlight/led-backlight.txt
create mode 100644 Documentation/devicetree/bindings/leds/backlight/led-backlight.yaml
delete mode 100644 Documentation/devicetree/bindings/leds/backlight/pwm-backlight.txt
create mode 100644 Documentation/devicetree/bindings/leds/backlight/pwm-backlight.yaml
diff --git a/Documentation/devicetree/bindings/leds/backlight/gpio-backlight.txt b/Documentation/devicetree/bindings/leds/backlight/gpio-backlight.txt
deleted file mode 100644
index 321be6640533..000000000000
--- a/Documentation/devicetree/bindings/leds/backlight/gpio-backlight.txt
+++ /dev/null
@@ -1,16 +0,0 @@
-gpio-backlight bindings
-
-Required properties:
- - compatible: "gpio-backlight"
- - gpios: describes the gpio that is used for enabling/disabling the backlight.
- refer to bindings/gpio/gpio.txt for more details.
-
-Optional properties:
- - default-on: enable the backlight at boot.
-
-Example:
- backlight {
- compatible = "gpio-backlight";
- gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>;
- default-on;
- };
diff --git a/Documentation/devicetree/bindings/leds/backlight/gpio-backlight.yaml b/Documentation/devicetree/bindings/leds/backlight/gpio-backlight.yaml
new file mode 100644
index 000000000000..75cc569b9c55
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/backlight/gpio-backlight.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/backlight/gpio-backlight.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: gpio-backlight bindings
+
+maintainers:
+ - Lee Jones <lee.jones@...aro.org>
+ - Daniel Thompson <daniel.thompson@...aro.org>
+ - Jingoo Han <jingoohan1@...il.com>
+
+properties:
+ compatible:
+ const: gpio-backlight
+
+ gpios:
+ description: The gpio that is used for enabling/disabling the backlight.
+ maxItems: 1
+
+ default-on:
+ description: enable the backlight at boot.
+ type: boolean
+
+required:
+ - compatible
+ - gpios
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ backlight {
+ compatible = "gpio-backlight";
+ gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>;
+ default-on;
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/leds/backlight/led-backlight.txt b/Documentation/devicetree/bindings/leds/backlight/led-backlight.txt
deleted file mode 100644
index 4c7dfbe7f67a..000000000000
--- a/Documentation/devicetree/bindings/leds/backlight/led-backlight.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-led-backlight bindings
-
-This binding is used to describe a basic backlight device made of LEDs.
-It can also be used to describe a backlight device controlled by the output of
-a LED driver.
-
-Required properties:
- - compatible: "led-backlight"
- - leds: a list of LEDs
-
-Optional properties:
- - brightness-levels: Array of distinct brightness levels. The levels must be
- in the range accepted by the underlying LED devices.
- This is used to translate a backlight brightness level
- into a LED brightness level. If it is not provided, the
- identity mapping is used.
-
- - default-brightness-level: The default brightness level.
-
-Example:
-
- backlight {
- compatible = "led-backlight";
-
- leds = <&led1>, <&led2>;
- brightness-levels = <0 4 8 16 32 64 128 255>;
- default-brightness-level = <6>;
- };
diff --git a/Documentation/devicetree/bindings/leds/backlight/led-backlight.yaml b/Documentation/devicetree/bindings/leds/backlight/led-backlight.yaml
new file mode 100644
index 000000000000..ae50945d2798
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/backlight/led-backlight.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/backlight/led-backlight.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: led-backlight bindings
+
+maintainers:
+ - Lee Jones <lee.jones@...aro.org>
+ - Daniel Thompson <daniel.thompson@...aro.org>
+ - Jingoo Han <jingoohan1@...il.com>
+
+description:
+ This binding is used to describe a basic backlight device made of LEDs. It
+ can also be used to describe a backlight device controlled by the output of
+ a LED driver.
+
+properties:
+ compatible:
+ const: led-backlight
+
+ leds:
+ description: A list of LED nodes
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+
+ brightness-levels:
+ description: Array of distinct brightness levels. The levels must be
+ in the range accepted by the underlying LED devices. This is used
+ to translate a backlight brightness level into a LED brightness level.
+ If it is not provided, the identity mapping is used.
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+
+ default-brightness-level:
+ description: The default brightness level (index into the array defined
+ by the "brightness-levels" property).
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+dependencies:
+ default-brightness-level: [brightness-levels]
+
+required:
+ - compatible
+ - leds
+
+additionalProperties: false
+
+examples:
+ - |
+ backlight {
+ compatible = "led-backlight";
+
+ leds = <&led1>, <&led2>;
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <6>;
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/leds/backlight/pwm-backlight.txt b/Documentation/devicetree/bindings/leds/backlight/pwm-backlight.txt
deleted file mode 100644
index 64fa2fbd98c9..000000000000
--- a/Documentation/devicetree/bindings/leds/backlight/pwm-backlight.txt
+++ /dev/null
@@ -1,61 +0,0 @@
-pwm-backlight bindings
-
-Required properties:
- - compatible: "pwm-backlight"
- - pwms: OF device-tree PWM specification (see PWM binding[0])
- - power-supply: regulator for supply voltage
-
-Optional properties:
- - pwm-names: a list of names for the PWM devices specified in the
- "pwms" property (see PWM binding[0])
- - enable-gpios: contains a single GPIO specifier for the GPIO which enables
- and disables the backlight (see GPIO binding[1])
- - post-pwm-on-delay-ms: Delay in ms between setting an initial (non-zero) PWM
- and enabling the backlight using GPIO.
- - pwm-off-delay-ms: Delay in ms between disabling the backlight using GPIO
- and setting PWM value to 0.
- - brightness-levels: Array of distinct brightness levels. Typically these
- are in the range from 0 to 255, but any range starting at
- 0 will do. The actual brightness level (PWM duty cycle)
- will be interpolated from these values. 0 means a 0% duty
- cycle (darkest/off), while the last value in the array
- represents a 100% duty cycle (brightest).
- - default-brightness-level: The default brightness level (index into the
- array defined by the "brightness-levels" property).
- - num-interpolated-steps: Number of interpolated steps between each value
- of brightness-levels table. This way a high
- resolution pwm duty cycle can be used without
- having to list out every possible value in the
- brightness-level array.
-
-[0]: Documentation/devicetree/bindings/pwm/pwm.txt
-[1]: Documentation/devicetree/bindings/gpio/gpio.txt
-
-Example:
-
- backlight {
- compatible = "pwm-backlight";
- pwms = <&pwm 0 5000000>;
-
- brightness-levels = <0 4 8 16 32 64 128 255>;
- default-brightness-level = <6>;
-
- power-supply = <&vdd_bl_reg>;
- enable-gpios = <&gpio 58 0>;
- post-pwm-on-delay-ms = <10>;
- pwm-off-delay-ms = <10>;
- };
-
-Example using num-interpolation-steps:
-
- backlight {
- compatible = "pwm-backlight";
- pwms = <&pwm 0 5000000>;
-
- brightness-levels = <0 2048 4096 8192 16384 65535>;
- num-interpolated-steps = <2048>;
- default-brightness-level = <4096>;
-
- power-supply = <&vdd_bl_reg>;
- enable-gpios = <&gpio 58 0>;
- };
diff --git a/Documentation/devicetree/bindings/leds/backlight/pwm-backlight.yaml b/Documentation/devicetree/bindings/leds/backlight/pwm-backlight.yaml
new file mode 100644
index 000000000000..7e1f109a38a4
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/backlight/pwm-backlight.yaml
@@ -0,0 +1,98 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/backlight/pwm-backlight.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: pwm-backlight bindings
+
+maintainers:
+ - Lee Jones <lee.jones@...aro.org>
+ - Daniel Thompson <daniel.thompson@...aro.org>
+ - Jingoo Han <jingoohan1@...il.com>
+
+properties:
+ compatible:
+ const: pwm-backlight
+
+ pwms:
+ maxItems: 1
+
+ pwm-names: true
+
+ power-supply:
+ description: regulator for supply voltage
+
+ enable-gpios:
+ description: Contains a single GPIO specifier for the GPIO which enables
+ and disables the backlight
+ maxItems: 1
+
+ post-pwm-on-delay-ms:
+ description: Delay in ms between setting an initial (non-zero) PWM and
+ enabling the backlight using GPIO.
+
+ pwm-off-delay-ms:
+ description: Delay in ms between disabling the backlight using GPIO
+ and setting PWM value to 0.
+
+ brightness-levels:
+ description: Array of distinct brightness levels. Typically these are
+ in the range from 0 to 255, but any range starting at 0 will do. The
+ actual brightness level (PWM duty cycle) will be interpolated from
+ these values. 0 means a 0% duty cycle (darkest/off), while the last
+ value in the array represents a 100% duty cycle (brightest).
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+
+ default-brightness-level:
+ description: The default brightness level (index into the array defined
+ by the "brightness-levels" property).
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ num-interpolated-steps:
+ description: Number of interpolated steps between each value of brightness-levels
+ table. This way a high resolution pwm duty cycle can be used without
+ having to list out every possible value in the brightness-level array.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+dependencies:
+ default-brightness-level: [brightness-levels]
+ num-interpolated-steps: [brightness-levels]
+
+required:
+ - compatible
+ - pwms
+ - power-supply
+
+additionalProperties: false
+
+examples:
+ - |
+ backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm 0 5000000>;
+
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <6>;
+
+ power-supply = <&vdd_bl_reg>;
+ enable-gpios = <&gpio 58 0>;
+ post-pwm-on-delay-ms = <10>;
+ pwm-off-delay-ms = <10>;
+ };
+
+ - |
+ // Example using num-interpolation-steps:
+ backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm 0 5000000>;
+
+ brightness-levels = <0 2048 4096 8192 16384 65535>;
+ num-interpolated-steps = <2048>;
+ default-brightness-level = <4096>;
+
+ power-supply = <&vdd_bl_reg>;
+ enable-gpios = <&gpio 58 0>;
+ };
+
+...
--
2.25.1
Powered by blists - more mailing lists