[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20200618011631.604574-112-sashal@kernel.org>
Date: Wed, 17 Jun 2020 21:13:57 -0400
From: Sasha Levin <sashal@...nel.org>
To: linux-kernel@...r.kernel.org, stable@...r.kernel.org
Cc: Martin Blumenstingl <martin.blumenstingl@...glemail.com>,
Jerome Brunet <jbrunet@...libre.com>,
Sasha Levin <sashal@...nel.org>,
linux-amlogic@...ts.infradead.org, linux-clk@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org
Subject: [PATCH AUTOSEL 5.4 112/266] clk: meson: meson8b: Don't rely on u-boot to init all GP_PLL registers
From: Martin Blumenstingl <martin.blumenstingl@...glemail.com>
[ Upstream commit a29ae8600d50ece1856b062a39ed296b8b952259 ]
Not all u-boot versions initialize the HHI_GP_PLL_CNTL[2-5] registers.
In that case all HHI_GPLL_PLL_CNTL[1-5] registers are 0x0 and when
booting Linux the PLL fails to lock.
The initialization sequence from u-boot is:
- put the PLL into reset
- write 0x59C88000 to HHI_GP_PLL_CNTL2
- write 0xCA463823 to HHI_GP_PLL_CNTL3
- write 0x0286A027 to HHI_GP_PLL_CNTL4
- write 0x00003000 to HHI_GP_PLL_CNTL5
- set M, N, OD and the enable bit
- take the PLL out of reset
- check if it has locked
- disable the PLL
In Linux we already initialize M, N, OD, the enable and the reset bits.
Also the HHI_GP_PLL_CNTL[2-5] registers with these magic values (the
exact meaning is unknown) so the PLL can lock when the vendor u-boot did
not initialize these registers yet.
Fixes: b882964b376f21 ("clk: meson: meson8b: add support for the GP_PLL clock on Meson8m2")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@...glemail.com>
Signed-off-by: Jerome Brunet <jbrunet@...libre.com>
Link: https://lore.kernel.org/r/20200501215717.735393-1-martin.blumenstingl@googlemail.com
Signed-off-by: Sasha Levin <sashal@...nel.org>
---
drivers/clk/meson/meson8b.c | 9 +++++++++
drivers/clk/meson/meson8b.h | 4 ++++
2 files changed, 13 insertions(+)
diff --git a/drivers/clk/meson/meson8b.c b/drivers/clk/meson/meson8b.c
index 4f9b79ed79d7..082178a0f41a 100644
--- a/drivers/clk/meson/meson8b.c
+++ b/drivers/clk/meson/meson8b.c
@@ -1910,6 +1910,13 @@ static struct clk_regmap meson8b_mali = {
},
};
+static const struct reg_sequence meson8m2_gp_pll_init_regs[] = {
+ { .reg = HHI_GP_PLL_CNTL2, .def = 0x59c88000 },
+ { .reg = HHI_GP_PLL_CNTL3, .def = 0xca463823 },
+ { .reg = HHI_GP_PLL_CNTL4, .def = 0x0286a027 },
+ { .reg = HHI_GP_PLL_CNTL5, .def = 0x00003000 },
+};
+
static const struct pll_params_table meson8m2_gp_pll_params_table[] = {
PLL_PARAMS(182, 3),
{ /* sentinel */ },
@@ -1943,6 +1950,8 @@ static struct clk_regmap meson8m2_gp_pll_dco = {
.width = 1,
},
.table = meson8m2_gp_pll_params_table,
+ .init_regs = meson8m2_gp_pll_init_regs,
+ .init_count = ARRAY_SIZE(meson8m2_gp_pll_init_regs),
},
.hw.init = &(struct clk_init_data){
.name = "gp_pll_dco",
diff --git a/drivers/clk/meson/meson8b.h b/drivers/clk/meson/meson8b.h
index c889fbeec30f..c91fb07fcb65 100644
--- a/drivers/clk/meson/meson8b.h
+++ b/drivers/clk/meson/meson8b.h
@@ -20,6 +20,10 @@
* [0] http://dn.odroid.com/S805/Datasheet/S805_Datasheet%20V0.8%2020150126.pdf
*/
#define HHI_GP_PLL_CNTL 0x40 /* 0x10 offset in data sheet */
+#define HHI_GP_PLL_CNTL2 0x44 /* 0x11 offset in data sheet */
+#define HHI_GP_PLL_CNTL3 0x48 /* 0x12 offset in data sheet */
+#define HHI_GP_PLL_CNTL4 0x4C /* 0x13 offset in data sheet */
+#define HHI_GP_PLL_CNTL5 0x50 /* 0x14 offset in data sheet */
#define HHI_VIID_CLK_DIV 0x128 /* 0x4a offset in data sheet */
#define HHI_VIID_CLK_CNTL 0x12c /* 0x4b offset in data sheet */
#define HHI_GCLK_MPEG0 0x140 /* 0x50 offset in data sheet */
--
2.25.1
Powered by blists - more mailing lists