[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20200618010805.600873-259-sashal@kernel.org>
Date: Wed, 17 Jun 2020 21:05:56 -0400
From: Sasha Levin <sashal@...nel.org>
To: linux-kernel@...r.kernel.org, stable@...r.kernel.org
Cc: Marc Zyngier <maz@...nel.org>,
Lorenzo Pieralisi <lorenzo.pieralisi@....com>,
Neil Armstrong <narmstrong@...libre.com>,
Rob Herring <robh@...nel.org>, Sasha Levin <sashal@...nel.org>,
linux-pci@...r.kernel.org, linux-amlogic@...ts.infradead.org,
linux-arm-kernel@...ts.infradead.org
Subject: [PATCH AUTOSEL 5.7 259/388] PCI: amlogic: meson: Don't use FAST_LINK_MODE to set up link
From: Marc Zyngier <maz@...nel.org>
[ Upstream commit 87dccf09323fc363bd0d072fcc12b96622ab8c69 ]
The vim3l board does not work with a standard PCIe switch (ASM1184e),
spitting all kind of errors - hinting at HW misconfiguration (no link,
port enumeration issues, etc).
According to the the Synopsys DWC PCIe Reference Manual, in the section
dedicated to the PLCR register, bit 7 is described (FAST_LINK_MODE) as:
"Sets all internal timers to fast mode for simulation purposes."
it is sound to set this bit from a simulation perspective, but on actual
silicon, which expects timers to have a nominal value, it is not.
Make sure the FAST_LINK_MODE bit is cleared when configuring the RC
to solve this problem.
Link: https://lore.kernel.org/r/20200429164230.309922-1-maz@kernel.org
Fixes: 9c0ef6d34fdb ("PCI: amlogic: Add the Amlogic Meson PCIe controller driver")
Signed-off-by: Marc Zyngier <maz@...nel.org>
[lorenzo.pieralisi@....com: commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@....com>
Reviewed-by: Neil Armstrong <narmstrong@...libre.com>
Acked-by: Rob Herring <robh@...nel.org>
Signed-off-by: Sasha Levin <sashal@...nel.org>
---
drivers/pci/controller/dwc/pci-meson.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/pci/controller/dwc/pci-meson.c b/drivers/pci/controller/dwc/pci-meson.c
index 3715dceca1bf..ca59ba9e0ecd 100644
--- a/drivers/pci/controller/dwc/pci-meson.c
+++ b/drivers/pci/controller/dwc/pci-meson.c
@@ -289,11 +289,11 @@ static void meson_pcie_init_dw(struct meson_pcie *mp)
meson_cfg_writel(mp, val, PCIE_CFG0);
val = meson_elb_readl(mp, PCIE_PORT_LINK_CTRL_OFF);
- val &= ~LINK_CAPABLE_MASK;
+ val &= ~(LINK_CAPABLE_MASK | FAST_LINK_MODE);
meson_elb_writel(mp, val, PCIE_PORT_LINK_CTRL_OFF);
val = meson_elb_readl(mp, PCIE_PORT_LINK_CTRL_OFF);
- val |= LINK_CAPABLE_X1 | FAST_LINK_MODE;
+ val |= LINK_CAPABLE_X1;
meson_elb_writel(mp, val, PCIE_PORT_LINK_CTRL_OFF);
val = meson_elb_readl(mp, PCIE_GEN2_CTRL_OFF);
--
2.25.1
Powered by blists - more mailing lists