[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <9f8820d6-c107-d6b7-1cf7-a8a48eca716d@roeck-us.net>
Date: Fri, 19 Jun 2020 22:19:19 -0700
From: Guenter Roeck <linux@...ck-us.net>
To: Manikandan Elumalai <manikandan.hcl.ers.epl@...il.com>,
Jean Delvare <jdelvare@...e.com>, linux-hwmon@...r.kernel.org,
linux-kernel@...r.kernel.org
Cc: saipsdasari@...com, patrickw3@...com, vijaykhemka@...com,
linux-aspeed@...ts.ozlabs.org, openbmc@...ts.ozlabs.org,
manikandan.e@....com
Subject: Re: [PATCH v5] hwmon:(adm1275) Enable adm1278 ADM1278_TEMP1_EN
On 6/19/20 9:35 PM, Manikandan Elumalai wrote:
> The adm1278 temp attribute need it for openbmc platform .
> This feature not enabled by default, so PMON_CONFIG needs to enable it.
>
> Signed-off-by: Manikandan Elumalai <manikandan.hcl.ers.epl@...il.com>
> ---
> --- v5 -align commit and change log.
> --- v4 -Reported-by: kernel test robot <lkp@...el.com>
> --- v3 -fix invalid signed-off.
> --- -removed checkpath warnings.
> --- -write ADM1278_TEMP1_EN and ADM1278_VOUT_EN conf in single line operation.
> --- v2 -add Signed-off-by.
> --- -removed ADM1278_TEMP1_EN check.
> ---
> ---
Not that it matters much here, but why all the "---" instead of just one,
especially after you were advised that this is not the expected format ?
Guenter
> drivers/hwmon/pmbus/adm1275.c | 12 +++++-------
> 1 file changed, 5 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/hwmon/pmbus/adm1275.c b/drivers/hwmon/pmbus/adm1275.c
> index 5caa37fb..d4e1925 100644
> --- a/drivers/hwmon/pmbus/adm1275.c
> +++ b/drivers/hwmon/pmbus/adm1275.c
> @@ -666,11 +666,12 @@ static int adm1275_probe(struct i2c_client *client,
> tindex = 3;
>
> info->func[0] |= PMBUS_HAVE_PIN | PMBUS_HAVE_STATUS_INPUT |
> - PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT;
> + PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT |
> + PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP;
>
> - /* Enable VOUT if not enabled (it is disabled by default) */
> - if (!(config & ADM1278_VOUT_EN)) {
> - config |= ADM1278_VOUT_EN;
> + /* Enable VOUT & TEMP1 if not enabled (disabled by default) */
> + if ((config & (ADM1278_VOUT_EN | ADM1278_TEMP1_EN)) != (ADM1278_VOUT_EN | ADM1278_TEMP1_EN)) {
> + config |= ADM1278_VOUT_EN | ADM1278_TEMP1_EN;
> ret = i2c_smbus_write_byte_data(client,
> ADM1275_PMON_CONFIG,
> config);
> @@ -681,9 +682,6 @@ static int adm1275_probe(struct i2c_client *client,
> }
> }
>
> - if (config & ADM1278_TEMP1_EN)
> - info->func[0] |=
> - PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP;
> if (config & ADM1278_VIN_EN)
> info->func[0] |= PMBUS_HAVE_VIN;
> break;
>
Powered by blists - more mailing lists