linux-kernel - Re: Banana Pi-R1 - kernel 5.6.0 and later broken

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <6495b781-03a1-c655-90b2-71fe984ef02f@wiesinger.com>
Date:   Sat, 20 Jun 2020 21:37:04 +0200
From:   Gerhard Wiesinger <lists@...singer.com>
To:     Florian Fainelli <f.fainelli@...il.com>,
        arm@...ts.fedoraproject.org,
        Maxime Ripard <maxime.ripard@...tlin.com>,
        Chen-Yu Tsai <wens@...e.org>,
        LKML <linux-kernel@...r.kernel.org>, filbar@...trum.cz
Subject: Re: Banana Pi-R1 - kernel 5.6.0 and later broken - b43 DSA

Hello Florian,

On 20.06.2020 21:13, Florian Fainelli wrote:
> Hi,
>
> On 6/20/2020 10:39 AM, Gerhard Wiesinger wrote:
> Can you share your network configuration again with me? 

Find the network config below.


>> # OK: Last good known version (booting that version is also ok)
>> Linux bpi 5.5.18-200.fc31.armv7hl #1 SMP Fri Apr 17 17:25:00 UTC 2020
>> armv7l armv7l armv7l GNU/Linux
> OK, I suspect what has changed is this commit:
>
> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=8fab459e69abfd04a66d76423d18ba853fced4ab
>
> which, if I remember your configuration correctly means that you now
> have proper DSA interfaces and so all of the wan, lan1-lan4 interfaces
> can now run a proper networking stack unlike before where you had to do
> this via the DSA master network device (eth0). This also means that you
> should run your DHCP server/client on the bridge master network device now.

Yes, config should be a proper DSA config, see also below. IP config is 
only on brlan and brwan.

Do the changes need a config change?
e.g. net: dsa: b53: Ensure the default VID is untagged
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/drivers/net/dsa/b53?id=d965a5432d4c3e6b9c3d2bc1d4a800013bbf76f6


Thnx.


Ciao,
Gerhard

Config:

brctl show
bridge name     bridge id               STP enabled     interfaces
brlan           8000.AAAAAAAAAAAA       no              lan.101
brlansw         8000.BBBBBBBBBBBB       no              lan1
                                                         lan2
                                                         lan3
                                                         lan4
brwan           8000.CCCCCCCCCCCC       no              wan.102
brwansw         8000.DDDDDDDDDDDD       no              wan

================================================================================

= /etc/systemd/network/30-autogen-eth0.network
================================================================================
[Match]
Name=eth0

[Network]
VLAN=lan.101
VLAN=wan.102
================================================================================
= /etc/systemd/network/40-autogen-lan.101.netdev
================================================================================
[NetDev]
Name=lan.101
Kind=vlan

[VLAN]
Id=101
================================================================================
= /etc/systemd/network/40-autogen-wan.102.netdev
================================================================================
[NetDev]
Name=wan.102
Kind=vlan

[VLAN]
Id=102
================================================================================
= /etc/systemd/network/50-autogen-brlan.netdev
================================================================================
[NetDev]
Name=brlan
Kind=bridge

[Bridge]
DefaultPVID=none
VLANFiltering=false
STP=false
================================================================================
= /etc/systemd/network/50-autogen-brlansw.netdev
================================================================================
[NetDev]
Name=brlansw
Kind=bridge

[Bridge]
DefaultPVID=none
VLANFiltering=true
STP=false
================================================================================
= /etc/systemd/network/50-autogen-brwan.netdev
================================================================================
[NetDev]
Name=brwan
Kind=bridge

[Bridge]
DefaultPVID=none
VLANFiltering=false
STP=false
================================================================================
= /etc/systemd/network/50-autogen-brwansw.netdev
================================================================================
[NetDev]
Name=brwansw
Kind=bridge

[Bridge]
DefaultPVID=none
VLANFiltering=true
STP=false
================================================================================
= /etc/systemd/network/60-autogen-brlan-lan.101.network
================================================================================
[Match]
Name=lan.101

[Network]
Bridge=brlan
================================================================================
= /etc/systemd/network/60-autogen-brlansw-lan1.network
================================================================================
[Match]
Name=lan1

[Network]
Bridge=brlansw

[BridgeVLAN]
VLAN=101
EgressUntagged=101
PVID=101
================================================================================
= /etc/systemd/network/60-autogen-brlansw-lan2.network
================================================================================
[Match]
Name=lan2

[Network]
Bridge=brlansw

[BridgeVLAN]
VLAN=101
EgressUntagged=101
PVID=101
================================================================================
= /etc/systemd/network/60-autogen-brlansw-lan3.network
================================================================================
[Match]
Name=lan3

[Network]
Bridge=brlansw

[BridgeVLAN]
VLAN=101
EgressUntagged=101
PVID=101
================================================================================
= /etc/systemd/network/60-autogen-brlansw-lan4.network
================================================================================
[Match]
Name=lan4

[Network]
Bridge=brlansw

[BridgeVLAN]
VLAN=101
EgressUntagged=101
PVID=101
================================================================================
= /etc/systemd/network/60-autogen-brwansw-wan.102.network
================================================================================
[Match]
Name=wan.102

[Network]
Bridge=brwansw
================================================================================
= /etc/systemd/network/60-autogen-brwansw-wan.network
================================================================================
[Match]
Name=wan

[Network]
Bridge=brwansw

[BridgeVLAN]
VLAN=102
EgressUntagged=102
PVID=102
================================================================================
= /etc/systemd/network/60-autogen-brwan-wan.102.network
================================================================================
[Match]
Name=wan.102

[Network]
Bridge=brwan
================================================================================
= /etc/systemd/network/61-autogen-brlan.network
================================================================================
[Match]
Name=brlan

[Network]
Address=192.168.39.2/24
Gateway=192.168.39.1
DNS=192.168.39.1
Domains=mydomain
================================================================================
= /etc/systemd/network/61-autogen-brwan.network
================================================================================
[Match]
Name=brwan

[Network]
Address=192.168.1.1/24