| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <c15189a5c77752ea62022608dab28601965afaaa.camel@gmail.com>
Date: Mon, 22 Jun 2020 15:58:44 -0300
From: Leonardo Bras <leobras.c@...il.com>
To: Alexey Kardashevskiy <aik@...abs.ru>
Cc: Michael Ellerman <mpe@...erman.id.au>,
Benjamin Herrenschmidt <benh@...nel.crashing.org>,
Paul Mackerras <paulus@...ba.org>,
Thiago Jung Bauermann <bauerman@...ux.ibm.com>,
Ram Pai <linuxram@...ibm.com>, linuxppc-dev@...ts.ozlabs.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH 1/4] powerpc/pseries/iommu: Update call to
ibm,query-pe-dma-windows
Hello Alexey, thank you for the feedback!
On Mon, 2020-06-22 at 20:02 +1000, Alexey Kardashevskiy wrote:
>
> On 19/06/2020 15:06, Leonardo Bras wrote:
> > From LoPAR level 2.8, "ibm,ddw-extensions" index 3 can make the number of
> > outputs from "ibm,query-pe-dma-windows" go from 5 to 6.
> >
> > This change of output size is meant to expand the address size of
> > largest_available_block PE TCE from 32-bit to 64-bit, which ends up
> > shifting page_size and migration_capable.
> >
> > This ends up requiring the update of
> > ddw_query_response->largest_available_block from u32 to u64, and manually
> > assigning the values from the buffer into this struct, according to
> > output size.
> >
> > Signed-off-by: Leonardo Bras <leobras.c@...il.com>
> > ---
> > arch/powerpc/platforms/pseries/iommu.c | 57 +++++++++++++++++++++-----
> > 1 file changed, 46 insertions(+), 11 deletions(-)
> >
> > diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c
> > index 6d47b4a3ce39..e5a617738c8b 100644
> > --- a/arch/powerpc/platforms/pseries/iommu.c
> > +++ b/arch/powerpc/platforms/pseries/iommu.c
> > @@ -334,7 +334,7 @@ struct direct_window {
> > /* Dynamic DMA Window support */
> > struct ddw_query_response {
> > u32 windows_available;
> > - u32 largest_available_block;
> > + u64 largest_available_block;
> > u32 page_size;
> > u32 migration_capable;
> > };
> > @@ -869,14 +869,32 @@ static int find_existing_ddw_windows(void)
> > }
> > machine_arch_initcall(pseries, find_existing_ddw_windows);
> >
> > +/*
> > + * From LoPAR level 2.8, "ibm,ddw-extensions" index 3 can rule how many output
> > + * parameters ibm,query-pe-dma-windows will have, ranging from 5 to 6.
> > + */
> > +
> > +static int query_ddw_out_sz(struct device_node *par_dn)
>
> Can easily be folded into query_ddw().
Sure, but it will get inlined by the compiler, and I think it reads
better this way.
I mean, I understand you have a reason to think it's better to fold it
in query_ddw(), and I would like to better understand that to improve
my code in the future.
> > +{
> > + int ret;
> > + u32 ddw_ext[3];
> > +
> > + ret = of_property_read_u32_array(par_dn, "ibm,ddw-extensions",
> > + &ddw_ext[0], 3);
> > + if (ret || ddw_ext[0] < 2 || ddw_ext[2] != 1)
>
> Oh that PAPR thing again :-/
>
> ===
> The “ibm,ddw-extensions” property value is a list of integers the first
> integer indicates the number of extensions implemented and subsequent
> integers, one per extension, provide a value associated with that
> extension.
> ===
>
> So ddw_ext[0] is length.
> Listindex==2 is for "reset" says PAPR and
> Listindex==3 is for this new 64bit "largest_available_block".
>
> So I'd expect ddw_ext[2] to have the "reset" token and ddw_ext[3] to
> have "1" for this new feature but indexes are smaller. I am confused.
> Either way these "2" and "3" needs to be defined in macros, "0" probably
> too.
Remember these indexes are not C-like 0-starting indexes, where the
size would be Listindex==1.
Basically, in C-like array it's :
a[0] == size,
a[1] == reset_token,
a[2] == new 64bit "largest_available_block"
> Please post 'lsprop "ibm,ddw-extensions"' here. Thanks,
Sure:
[root@...t pci@...000029004005]# lsprop "ibm,ddw-extensions"
ibm,dd
w-extensions
00000002 00000056 00000000
>
> > + return 5;
> > + return 6;
> > +}
> > +
> > static int query_ddw(struct pci_dev *dev, const u32 *ddw_avail,
> > - struct ddw_query_response *query)
> > + struct ddw_query_response *query,
> > + struct device_node *par_dn)
> > {
> > struct device_node *dn;
> > struct pci_dn *pdn;
> > - u32 cfg_addr;
> > + u32 cfg_addr, query_out[5];
> > u64 buid;
> > - int ret;
> > + int ret, out_sz;
> >
> > /*
> > * Get the config address and phb buid of the PE window.
> > @@ -888,12 +906,29 @@ static int query_ddw(struct pci_dev *dev, const u32 *ddw_avail,
> > pdn = PCI_DN(dn);
> > buid = pdn->phb->buid;
> > cfg_addr = ((pdn->busno << 16) | (pdn->devfn << 8));
> > + out_sz = query_ddw_out_sz(par_dn);
> > +
> > + ret = rtas_call(ddw_avail[0], 3, out_sz, query_out,
> > + cfg_addr, BUID_HI(buid), BUID_LO(buid));
> > + dev_info(&dev->dev, "ibm,query-pe-dma-windows(%x) %x %x %x returned %d\n",
> > + ddw_avail[0], cfg_addr, BUID_HI(buid), BUID_LO(buid), ret);
> > +
> > + switch (out_sz) {
> > + case 5:
> > + query->windows_available = query_out[0];
> > + query->largest_available_block = query_out[1];
> > + query->page_size = query_out[2];
> > + query->migration_capable = query_out[3];
> > + break;
> > + case 6:
> > + query->windows_available = query_out[0];
> > + query->largest_available_block = ((u64)query_out[1] << 32) |
> > + query_out[2];
> > + query->page_size = query_out[3];
> > + query->migration_capable = query_out[4];
> > + break;
> > + }
> >
> > - ret = rtas_call(ddw_avail[0], 3, 5, (u32 *)query,
> > - cfg_addr, BUID_HI(buid), BUID_LO(buid));
> > - dev_info(&dev->dev, "ibm,query-pe-dma-windows(%x) %x %x %x"
> > - " returned %d\n", ddw_avail[0], cfg_addr, BUID_HI(buid),
> > - BUID_LO(buid), ret);
> > return ret;
> > }
> >
> > @@ -1040,7 +1075,7 @@ static u64 enable_ddw(struct pci_dev *dev, struct device_node *pdn)
> > * of page sizes: supported and supported for migrate-dma.
> > */
> > dn = pci_device_to_OF_node(dev);
> > - ret = query_ddw(dev, ddw_avail, &query);
> > + ret = query_ddw(dev, ddw_avail, &query, pdn);
> > if (ret != 0)
> > goto out_failed;
> >
> > @@ -1068,7 +1103,7 @@ static u64 enable_ddw(struct pci_dev *dev, struct device_node *pdn)
> > /* check largest block * page size > max memory hotplug addr */
> > max_addr = ddw_memory_hotplug_max();
> > if (query.largest_available_block < (max_addr >> page_shift)) {
> > - dev_dbg(&dev->dev, "can't map partition max 0x%llx with %u "
> > + dev_dbg(&dev->dev, "can't map partition max 0x%llx with %llu "
> > "%llu-sized pages\n", max_addr, query.largest_available_block,
> > 1ULL << page_shift);
> > goto out_failed;
> >
Best regards,
Leonardo
Powered by blists - more mailing lists