| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20200622113740.46450-1-paul@crapouillou.net>
Date: Mon, 22 Jun 2020 13:37:40 +0200
From: Paul Cercueil <paul@...pouillou.net>
To: Rob Herring <robh+dt@...nel.org>
Cc: Linus Walleij <linus.walleij@...aro.org>, od@...c.me,
linux-gpio@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, Paul Cercueil <paul@...pouillou.net>
Subject: [PATCH RESEND v2] dt-bindings: pinctrl: Convert ingenic,pinctrl.txt to YAML
Convert the ingenic,pinctrl.txt doc file to ingenic,pinctrl.yaml.
In the process, some compatible strings now require a fallback, as the
corresponding SoCs are pin-compatible with their fallback variant.
Signed-off-by: Paul Cercueil <paul@...pouillou.net>
---
Notes:
v2: - Use 'pinctrl' instead of 'pin-controller' as the node name
- remove 'additionalProperties: false' since we will have pin conf nodes
.../bindings/pinctrl/ingenic,pinctrl.txt | 81 -----------
.../bindings/pinctrl/ingenic,pinctrl.yaml | 136 ++++++++++++++++++
2 files changed, 136 insertions(+), 81 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.txt
create mode 100644 Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.yaml
diff --git a/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.txt
deleted file mode 100644
index d9b2100c98e8..000000000000
--- a/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.txt
+++ /dev/null
@@ -1,81 +0,0 @@
-Ingenic XBurst pin controller
-
-Please refer to pinctrl-bindings.txt in this directory for details of the
-common pinctrl bindings used by client devices, including the meaning of the
-phrase "pin configuration node".
-
-For the XBurst SoCs, pin control is tightly bound with GPIO ports. All pins may
-be used as GPIOs, multiplexed device functions are configured within the
-GPIO port configuration registers and it is typical to refer to pins using the
-naming scheme "PxN" where x is a character identifying the GPIO port with
-which the pin is associated and N is an integer from 0 to 31 identifying the
-pin within that GPIO port. For example PA0 is the first pin in GPIO port A, and
-PB31 is the last pin in GPIO port B. The jz4740, the x1000 and the x1830
-contains 4 GPIO ports, PA to PD, for a total of 128 pins. The jz4760, the
-jz4770 and the jz4780 contains 6 GPIO ports, PA to PF, for a total of 192 pins.
-
-
-Required properties:
---------------------
-
- - compatible: One of:
- - "ingenic,jz4740-pinctrl"
- - "ingenic,jz4725b-pinctrl"
- - "ingenic,jz4760-pinctrl"
- - "ingenic,jz4760b-pinctrl"
- - "ingenic,jz4770-pinctrl"
- - "ingenic,jz4780-pinctrl"
- - "ingenic,x1000-pinctrl"
- - "ingenic,x1000e-pinctrl"
- - "ingenic,x1500-pinctrl"
- - "ingenic,x1830-pinctrl"
- - reg: Address range of the pinctrl registers.
-
-
-Required properties for sub-nodes (GPIO chips):
------------------------------------------------
-
- - compatible: Must contain one of:
- - "ingenic,jz4740-gpio"
- - "ingenic,jz4760-gpio"
- - "ingenic,jz4770-gpio"
- - "ingenic,jz4780-gpio"
- - "ingenic,x1000-gpio"
- - "ingenic,x1830-gpio"
- - reg: The GPIO bank number.
- - interrupt-controller: Marks the device node as an interrupt controller.
- - interrupts: Interrupt specifier for the controllers interrupt.
- - #interrupt-cells: Should be 2. Refer to
- ../interrupt-controller/interrupts.txt for more details.
- - gpio-controller: Marks the device node as a GPIO controller.
- - #gpio-cells: Should be 2. The first cell is the GPIO number and the second
- cell specifies GPIO flags, as defined in <dt-bindings/gpio/gpio.h>. Only the
- GPIO_ACTIVE_HIGH and GPIO_ACTIVE_LOW flags are supported.
- - gpio-ranges: Range of pins managed by the GPIO controller. Refer to
- ../gpio/gpio.txt for more details.
-
-
-Example:
---------
-
-pinctrl: pin-controller@...10000 {
- compatible = "ingenic,jz4740-pinctrl";
- reg = <0x10010000 0x400>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- gpa: gpio@0 {
- compatible = "ingenic,jz4740-gpio";
- reg = <0>;
-
- gpio-controller;
- gpio-ranges = <&pinctrl 0 0 32>;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
-
- interrupt-parent = <&intc>;
- interrupts = <28>;
- };
-};
diff --git a/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.yaml
new file mode 100644
index 000000000000..5be2b1e95b36
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.yaml
@@ -0,0 +1,136 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/ingenic,pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ingenic SoCs pin controller devicetree bindings
+
+description: >
+ Please refer to pinctrl-bindings.txt in this directory for details of the
+ common pinctrl bindings used by client devices, including the meaning of the
+ phrase "pin configuration node".
+
+ For the Ingenic SoCs, pin control is tightly bound with GPIO ports. All pins
+ may be used as GPIOs, multiplexed device functions are configured within the
+ GPIO port configuration registers and it is typical to refer to pins using the
+ naming scheme "PxN" where x is a character identifying the GPIO port with
+ which the pin is associated and N is an integer from 0 to 31 identifying the
+ pin within that GPIO port. For example PA0 is the first pin in GPIO port A,
+ and PB31 is the last pin in GPIO port B. The JZ4740, the X1000 and the X1830
+ contains 4 GPIO ports, PA to PD, for a total of 128 pins. The JZ4760, the
+ JZ4770 and the JZ4780 contains 6 GPIO ports, PA to PF, for a total of 192
+ pins.
+
+maintainers:
+ - Paul Cercueil <paul@...pouillou.net>
+
+properties:
+ nodename:
+ pattern: "^pinctrl@[0-9a-f]+$"
+
+ compatible:
+ oneOf:
+ - enum:
+ - ingenic,jz4740-pinctrl
+ - ingenic,jz4725b-pinctrl
+ - ingenic,jz4760-pinctrl
+ - ingenic,jz4770-pinctrl
+ - ingenic,jz4780-pinctrl
+ - ingenic,x1000-pinctrl
+ - ingenic,x1500-pinctrl
+ - ingenic,x1830-pinctrl
+ - items:
+ - const: ingenic,jz4760b-pinctrl
+ - const: ingenic,jz4760-pinctrl
+ - items:
+ - const: ingenic,x1000e-pinctrl
+ - const: ingenic,x1000-pinctrl
+
+ reg:
+ maxItems: 1
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+patternProperties:
+ "^gpio@[0-9]$":
+ type: object
+ properties:
+ compatible:
+ enum:
+ - ingenic,jz4740-gpio
+ - ingenic,jz4725b-gpio
+ - ingenic,jz4760-gpio
+ - ingenic,jz4770-gpio
+ - ingenic,jz4780-gpio
+ - ingenic,x1000-gpio
+ - ingenic,x1500-gpio
+ - ingenic,x1830-gpio
+
+ reg:
+ items:
+ - description: The GPIO bank number
+
+ gpio-controller: true
+
+ "#gpio-cells":
+ const: 2
+
+ gpio-ranges:
+ maxItems: 1
+
+ interrupt-controller: true
+
+ "#interrupt-cells":
+ const: 2
+ description:
+ Refer to ../interrupt-controller/interrupts.txt for more details.
+
+ interrupts:
+ maxItems: 1
+
+ required:
+ - compatible
+ - reg
+ - gpio-controller
+ - "#gpio-cells"
+ - interrupts
+ - interrupt-controller
+ - "#interrupt-cells"
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - "#address-cells"
+ - "#size-cells"
+
+examples:
+ - |
+ pin-controller@...10000 {
+ compatible = "ingenic,jz4770-pinctrl";
+ reg = <0x10010000 0x600>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio@0 {
+ compatible = "ingenic,jz4770-gpio";
+ reg = <0>;
+
+ gpio-controller;
+ gpio-ranges = <&pinctrl 0 0 32>;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <17>;
+ };
+ };
--
2.26.2
Powered by blists - more mailing lists