lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20200622114228.60027-3-vaibhavgupta40@gmail.com>
Date:   Mon, 22 Jun 2020 17:12:25 +0530
From:   Vaibhav Gupta <vaibhavgupta40@...il.com>
To:     Bjorn Helgaas <helgaas@...nel.org>,
        Bjorn Helgaas <bhelgaas@...gle.com>, bjorn@...gaas.com,
        "David S. Miller" <davem@...emloft.net>,
        Jakub Kicinski <kuba@...nel.org>,
        Vaibhav Gupta <vaibhav.varodek@...il.com>
Cc:     Vaibhav Gupta <vaibhavgupta40@...il.com>,
        linux-kernel-mentees@...ts.linuxfoundation.org,
        skhan@...uxfoundation.org, netdev@...r.kernel.org,
        linux-parisc@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH v1 2/5] tulip: windbond-840: use generic power management

With stable support of generic PM callbacks, drivers no longer need to use
legacy .suspend() and .resume() in which they had to maintain PCI states
changes and device's power state themselves.

Earlier, .resume() was invoking pci_enable_device(). Drivers should not
call PCI legacy helper functions, hence, it was removed. This should not
change the behavior of the device as this function is called by PCI core
if somehow pm_ops is not able to bind with the driver, else, required tasks
are managed by the core itself.

Compile-tested only.

Signed-off-by: Vaibhav Gupta <vaibhavgupta40@...il.com>
---
 drivers/net/ethernet/dec/tulip/winbond-840.c | 26 ++++++--------------
 1 file changed, 8 insertions(+), 18 deletions(-)

diff --git a/drivers/net/ethernet/dec/tulip/winbond-840.c b/drivers/net/ethernet/dec/tulip/winbond-840.c
index 4d5e4fa53023..5dcc66f60144 100644
--- a/drivers/net/ethernet/dec/tulip/winbond-840.c
+++ b/drivers/net/ethernet/dec/tulip/winbond-840.c
@@ -1530,8 +1530,6 @@ static void w840_remove1(struct pci_dev *pdev)
 	}
 }
 
-#ifdef CONFIG_PM
-
 /*
  * suspend/resume synchronization:
  * - open, close, do_ioctl:
@@ -1555,9 +1553,9 @@ static void w840_remove1(struct pci_dev *pdev)
  * Detach must occur under spin_unlock_irq(), interrupts from a detached
  * device would cause an irq storm.
  */
-static int w840_suspend (struct pci_dev *pdev, pm_message_t state)
+static int __maybe_unused w840_suspend(struct device *dev_d)
 {
-	struct net_device *dev = pci_get_drvdata (pdev);
+	struct net_device *dev = dev_get_drvdata(dev_d);
 	struct netdev_private *np = netdev_priv(dev);
 	void __iomem *ioaddr = np->base_addr;
 
@@ -1590,21 +1588,15 @@ static int w840_suspend (struct pci_dev *pdev, pm_message_t state)
 	return 0;
 }
 
-static int w840_resume (struct pci_dev *pdev)
+static int __maybe_unused w840_resume(struct device *dev_d)
 {
-	struct net_device *dev = pci_get_drvdata (pdev);
+	struct net_device *dev = dev_get_drvdata(dev_d);
 	struct netdev_private *np = netdev_priv(dev);
-	int retval = 0;
 
 	rtnl_lock();
 	if (netif_device_present(dev))
 		goto out; /* device not suspended */
 	if (netif_running(dev)) {
-		if ((retval = pci_enable_device(pdev))) {
-			dev_err(&dev->dev,
-				"pci_enable_device failed in resume\n");
-			goto out;
-		}
 		spin_lock_irq(&np->lock);
 		iowrite32(1, np->base_addr+PCIBusCfg);
 		ioread32(np->base_addr+PCIBusCfg);
@@ -1622,19 +1614,17 @@ static int w840_resume (struct pci_dev *pdev)
 	}
 out:
 	rtnl_unlock();
-	return retval;
+	return 0;
 }
-#endif
+
+static SIMPLE_DEV_PM_OPS(w840_pm_ops, w840_suspend, w840_resume);
 
 static struct pci_driver w840_driver = {
 	.name		= DRV_NAME,
 	.id_table	= w840_pci_tbl,
 	.probe		= w840_probe1,
 	.remove		= w840_remove1,
-#ifdef CONFIG_PM
-	.suspend	= w840_suspend,
-	.resume		= w840_resume,
-#endif
+	.driver.pm	= &w840_pm_ops,
 };
 
 static int __init w840_init(void)
-- 
2.27.0

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ